did some more work this weekend, cleaned up the hole for under the bow, pulled out all the styrofoam peanuts that were in there  ( what a bitch ), painted inside the hole, started cleaning all the overspary off the trailer.  frist pic is the before pic.

My boat look like that two weeks ago great job,when's the motor going in.

motor is in and running, that first pic was taken awhile ago, i just used it for the before of what the hole looked like.
i am ready to go   but will probably find more stuff to redo

finally stepped up and ordered a place diverter for the boat----thanks tom, i appreciate everything.  what do you guys think i will see in the way of performance gains on the top end. it is a berk 12jg set back with a droop, wedge, and ride plate, all  are staying on the boat as well..thanks for the input,  can't wait to get it, then p/c then on the boat

got the diverter test fit, perfect of course, thanks tom and jbp. drilled the hole in the back for the cable, that took alot of convincing, i hate putting holes in my boat. now to paint/pc and water test

took the diverter back off yesterday and took it apart to paint, spent yesterday afternoon and today painting it, i was suprised how close the paint came to matching the powerder coat on the rest of the pump, the diverter will get pc'd just at a later date, that money will go towards changing the piping on the interior now.  reinstalled on boat and ready to go

took the diverter back off yesterday and took it apart to paint, spent yesterday afternoon and today painting it, i was suprised how close the paint came to matching the powerder coat on the rest of the pump, the diverter will get pc'd just at a later date, that money will go towards changing the piping on the interior now.  reinstalled on boat and ready to go

Get down great job

and a word of advise, don't try to put decals back on and clear coat over them when you have a healthy buzz going on.
sticker is now on upside down damn i am an idiot

ROTFLMAO,
your shit looks tight

proof that i am a dumbass, as if that is needed

you always said pickle fork owners werent the most  smartest 

proof that i am a dumbass, as if that is needed

Think of it this way.... When you are shooting a rooster, those in the boat wanting to know what you've got, can hang over the back while you are running and read the make of your diverter.   

Do you have any idea of the amount of morons that will tell you the reverse bucket is upside down..

But it looks sweet
 
2sav

yeah, give me a month, i will forget about it. be in the garage drinking, get drunk, see it, take it all apart thinking i put it together wrong and try to figure out how to put on the "right" way

Do you have any idea of the amount of morons that will tell you the reverse bucket is upside down..

But it looks sweet
 
2sav

Just tell the morons that you did it on purpose and say it improves performance and tell them they should do the same thing

sounds like a jim rich story to me