SoCal Jet Boats
Tech Talk => Projects => Topic started by: Pgp88se on January 26, 2016, 04:37:19 AM
-
I have a 75 spectra that was olds powered, I'm switching to pontiac power and noticed when pulling the olds out the the rubber mounts on the bell housing to pump housing mount are just trashed, the rubber is split with chunks missing. Does anyone know where I can find these? A search online isn't turning up anything.
-
Throws me off,"mounts and these ". If Berkeley bellhousing to pump flat o-ring bearing cap mount,#150-514475, I think. Not Berkeley, I dk. Good luck.
-
Don't really know squat about the Pontiac, but the 3 point mounts I got with a bunch of other parts for a 460 used what looked like to me car engine mounts. Maybe check rockauto or Napa online and look at some pictures. Good luck
-
The rubber on the pump bearing cap? I will look when I get home.
-
I'm almost certain this guy has a jacuzzi pump and is looking for the rubber bushings numbered "104" in the diagram.
I have a few good ones if my guess is correct.
Sent from my iPhone using SoCal Jet Boats
-
104 in the duagram is exactly what I need
I'm almost certain this guy has a jacuzzi pump and is looking for the rubber bushings numbered "104" in the diagram.
I have a few good ones if my guess is correct.
Sent from my iPhone using SoCal Jet Boats
-
104 in the duagram is exactly what I need
I have a few sets, as a matter of fact I also have the entire bracket with good bushings in it.
Bushings alone $25/pair or $45 for the bracket with them in it. Plus shipping.
Sent from my iPhone using SoCal Jet Boats
-
I have a few sets, as a matter of fact I also have the entire bracket with good bushings in it.
Bushings alone $25/pair or $45 for the bracket with them in it. Plus shipping.
I'll take just the bushings, sent you a pm thanks!
Sent from my iPhone using SoCal Jet Boats