hey josh sweet project. i noticed that the diverter handle looked like it was mounted directly to the floor, and bolted down. Say it isnt so that someone bolted down the diverter handle through those beautiful bolsa floors


The Beav

I've seen it, it is in a cool location. the only thing I would do different if I was starting fresh  (and the holes weren't already there) I would make an angle bracket bolt it threw the side of the tunnel as apposed to threw the bottom. That way if it was not perfectly sealed, it wont get water between the glass and the balsa.

every nut and bolt will be removed, and sealed with 5200!

5200 is the money.  some dripped onto the floor when i sealed my pump with it and i couldnt get it off.  if my pump ever has to come out im gonna cut it out and install a dominator. 

did you figure out how you're gonna fix all those holes in the dash? 

5200 is the money.  some dripped onto the floor when i sealed my pump with it and i couldnt get it off.  if my pump ever has to come out im gonna cut it out and install a dominator. 

did you figure out how you're gonna fix all those holes in the dash? 

yeah, first of all behind the dash needs new wood...because simply there is no wood behind there left...so the 2 holes that were originally filled will have to be drilled out, then the new wood behind the dash and then all hole's but the helm will be filled so i can start with a clean slate...

Hey and they're half price! I got almost twice that into the POS seats I got and they aint even covered yet!