SoCal Jet Boats

Tech Talk => Projects => Topic started by: tunnels on April 01, 2020, 09:14:00 PM

Title: Pics tomorrow.
Post by: tunnels on April 01, 2020, 09:14:00 PM

SI glued the plywood and stringers to my boat( Tunnel hull) Weighted it down. Hope it turns out OK!

Title: Re: Pics tomorrow.
Post by: FordLover on April 02, 2020, 11:31:37 AM

Good luck!!!

Sent from my LG-TP450 using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)

Title: Re: Pics tomorrow.
Post by: tunnels on April 02, 2020, 01:43:25 PM

Thank You. Pics might have to be tomorrow, Using the extra slow hardener and the temp in the garage is 60 degrees.

Title: Re: Pics tomorrow.
Post by: dkcerven352 on April 15, 2020, 06:11:18 PM

How did it turn out?

Title: Re: Pics tomorrow.
Post by: tunnels on April 17, 2020, 10:07:40 AM

It's coming alone, Having trouble up loading pics. When I get a chance I will work on pics.

Title: Re: Pics tomorrow.
Post by: FordLover on April 17, 2020, 07:44:41 PM

Quote from: tunnels on April 17, 2020, 10:07:40 AM

It's coming alone, Having trouble up loading pics. When I get a chance I will work on pics.

Flip phone issues? Lol

Sent from my LG-TP450 using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)

Title: Re: Pics tomorrow.
Post by: tunnels on April 18, 2020, 09:00:57 AM

And I went to get a new phone, But they don't accept checks! ;D

Title: Re: Pics tomorrow.
Post by: tunnels on April 26, 2020, 11:21:16 AM

What weight and type of Fiber glass should I use to glass in the stringers? Could not find a thread on it. Also where do I go to get the phone app?

Title: Re: Pics tomorrow.
Post by: Bradbear12 on April 27, 2020, 01:16:35 PM

I went a little heavy on mine went with a layer of 2oz csm then a layer of 1708 over the top Sherfab in Ontario is the place to go for material.

Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)

Title: Re: Pics tomorrow.
Post by: tunnels on April 27, 2020, 04:16:27 PM

Thank you.

Title: Re: Pics tomorrow.
Post by: tunnels on April 27, 2020, 04:24:23 PM

First pic share.

Sent from my SM-G955U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)

Title: Re: Pics tomorrow.
Post by: tunnels on May 17, 2020, 07:21:01 PM

So I have to replace the bulk head and the side panels to hold the fuel tanks. I have read and watched videos and they all recommend leaving an 1/8 inch gap. My question is? Can I use cork in between to alow for heat expansion or does it have to be an air gap?