SoCal Jet Boats

Tech Talk => Projects => Topic started by: 69kona on October 26, 2015, 02:48:26 PM

Title: Project Mach 1 19ft
Post by: 69kona on October 26, 2015, 02:48:26 PM: Picked this up for cheap ... Needs some loving lol but it pretty soild as far as strings ... Built new motor
Pump is wasted through ....little at a time keeps me off the couch being lazy lol

Sent from my iPhone using SoCal Jet Boats
Title: Re: Project Mach 1 19ft
Post by: 69kona on October 26, 2015, 06:20:46 PM: One more pic

Sent from my iPhone using SoCal Jet Boats
Title: Re: Project Mach 1 19ft
Post by: SkankyTheClown on October 27, 2015, 01:43:38 PM: My old trailer!

Sent from my iPhone using SoCal Jet Boats
Title: Re: Project Mach 1 19ft
Post by: 69kona on November 08, 2015, 10:58:17 AM: Went through the pump replaced shaft and turned impeller down for new wear ring

Sent from my iPhone using SoCal Jet Boats
Title: Re: Project Mach 1 19ft
Post by: 69kona on November 08, 2015, 11:00:11 AM: Had to fix floor and glass a new piece in the dash

Sent from my iPhone using SoCal Jet Boats
Title: Re: Project Mach 1 19ft
Post by: 69kona on December 01, 2015, 10:45:49 AM: Seats put in ... Almost ready for carpet in this beast

Sent from my iPhone using SoCal Jet Boats
Title: Re: Project Mach 1 19ft
Post by: 69kona on December 04, 2015, 10:54:14 AM: Some painting done

Sent from my iPhone using SoCal Jet Boats
Title: Re: Project Mach 1 19ft
Post by: bmcgee463 on December 04, 2015, 07:01:23 PM: I have the same seats for my build. I haven't put in yet . what did you fabricate for the brackets?
Title: Re: Project Mach 1 19ft
Post by: 69kona on December 05, 2015, 05:47:34 PM: Got pump put in

Sent from my iPhone using SoCal Jet Boats
Title: Re: Project Mach 1 19ft
Post by: 69kona on December 07, 2015, 06:39:27 AM: Quote from: bmcgee463 on December 04, 2015, 07:01:23 PM
I have the same seats for my build. I haven't put in yet . what did you fabricate for the brackets?
I'll send u some pics

Sent from my iPhone using SoCal Jet Boats
Title: Re: Project Mach 1 19ft
Post by: 69kona on December 16, 2015, 12:46:04 PM: Finished glassing scoop

Sent from my iPhone using SoCal Jet Boats
Title: Re: Project Mach 1 19ft
Post by: Hoofy on December 16, 2015, 01:20:26 PM: ][URL] (http://[URL)[/URL]

Sent from my SM-G920V using Tapatalk
Title: Re: Project Mach 1 19ft
Post by: 69kona on December 16, 2015, 04:26:45 PM: Quote from: Hoofy on December 16, 2015, 01:20:26 PM
[URL]]][URL] (http://[URL=http://)[/URL]

Sent from my SM-G920V using Tapatalk
?

Sent from my iPhone using SoCal Jet Boats
Title: Re: Project Mach 1 19ft
Post by: Hoofy on December 16, 2015, 04:38:45 PM: Quote from: 69kona on December 16, 2015, 04:26:45 PM
?

Sent from my iPhone using SoCal Jet Boats
No clue what I posted. Three hours ago was nap time.

Sent from my SM-G920V using Tapatalk
Title: Re: Project Mach 1 19ft
Post by: 69kona on December 16, 2015, 04:44:42 PM: No problem lol ...see u in February at the needles show?

Sent from my iPhone using SoCal Jet Boats
Title: Re: Project Mach 1 19ft
Post by: 69kona on April 25, 2016, 06:02:13 PM: Took it out for test run on new motor..
Tunnel ram has to go .... But the motor is solid

Sent from my iPhone using SoCal Jet Boats
Title: Re: Project Mach 1 19ft
Post by: 76Rogers on April 25, 2016, 08:33:26 PM: Quote from: 69kona on April 25, 2016, 06:02:13 PM
Took it out for test run on new motor..
Tunnel ram has to go .... But the motor is solid

Sent from my iPhone using SoCal Jet Boats
that thing cleans up nice.👍🏻

Sent from my iPhone using SoCal Jet Boats
Title: Re: Project Mach 1 19ft
Post by: 69kona on April 25, 2016, 09:10:18 PM: Quote from: 76Rogers on April 25, 2016, 08:33:26 PM
that thing cleans up nice.👍🏻

Sent from my iPhone using SoCal Jet Boats
Thank u ...

Sent from my iPhone using SoCal Jet Boats