SCJB Exclusive: 2014 19' Cheyenne

« **Reply #250 on:** January 22, 2016, 10:37:45 AM »

Quote from: 19ftCheyenne on January 22, 2016, 09:27:21 AM

Sorry for lagging guys. Boats been sitting in my garage for years =(. I've been waiting and still am on my engine builder. He's had my motor for over 3 years. Supposedly it's any day from being finished. It weighs about 450 and cost 1 million

At what speed do you need to get the bottom re-worked?

« **Reply #251 on:** January 22, 2016, 10:44:14 AM »

At what speed ? Huh ? But yes I had Jeff Bennett do the bottom on mine, and Zack Rauscher installed the intake that I bought from Jack at mpd with all the bells and whistles done to it.

« **Reply #252 on:** January 22, 2016, 10:57:27 AM »

I would say anything over 110 or Top Eliminator territory

Sent from McIntyre Park

« **Reply #253 on:** January 22, 2016, 10:59:40 AM »

Ya jeff said when u go over 100 you should play with the bottom

« **Reply #254 on:** January 22, 2016, 10:59:47 AM »

Quote from: 19ftCheyenne on January 22, 2016, 10:44:14 AM

At what speed ? Huh ? But yes I had Jeff Bennett do the bottom on mine, and Zack Rauscher installed the intake that I bought from Jack at mpd with all the bells and whistles done to it.

Yeah, when I spoke with Mike D years ago he said that their tunnel was only good to about 105 MPH. Any faster and it would need bottom work.

« **Reply #255 on:** January 22, 2016, 11:06:37 AM »

Here's the info they gave me 105 to 110 MPH.

« **Reply #256 on:** January 22, 2016, 02:14:49 PM »

Quote from: Derrick on January 22, 2016, 09:49:58 AM

I saw b1 post that they have the mold on ig. Didn't know it was the same one ralls had. Ralls laid up some beautiful stuff. The white one at tom Papp was supposedly #4 off his mold weighing in at 365. Really curious to see what b1 wants for a hull.

Sent from my iPhone using SoCal Jet Boats

Chris emailed me back. He ya go.

12,500 1-3 colors
Floors finished with rub rail

Joel at fiber tech doing lay up

He was doing all California performance hulls he's good

B1 Racing LLC
Chris Starkweather

« **Reply #257 on:** January 22, 2016, 02:17:51 PM »

Quote from: 78Southwind on January 22, 2016, 02:14:49 PM

Chris emailed me back. He ya go.

12,500 1-3 colors
Floors finished with rub rail

Joel at fiber tech doing lay up

He was doing all California performance hulls he's good

B1 Racing LLC
Chris Starkweather

Sucks because there was a grey gs daytona that just sold for the same price with a dolly, low pro, Dom suction and some other stuff too.

Thanks for the info. Just trying to get some ideas besides restoring a old Daytona.

Sent from my iPhone using SoCal Jet Boats

« **Reply #258 on:** January 22, 2016, 02:27:17 PM »

Not everybody is ment to own a Cheyenne 😆

« **Reply #259 on:** January 22, 2016, 08:14:59 PM »

Yours may be a barn find in 10 years lol sorry Sammy had to

« **Reply #260 on:** January 22, 2016, 08:19:16 PM »

It will still be better then ur sprint 😉

« **Reply #261 on:** March 29, 2016, 08:41:57 PM »

Couple pics from today's dyno session. This builds back in action! !

« **Reply #262 on:** March 29, 2016, 08:51:16 PM »

Quote from: 19ftCheyenne on March 29, 2016, 08:41:57 PM

Couple pics from today's dyno session. This builds back in action! !

my god Sammy are you keeping the numbers quiet? Absolutely gorgeous

Drinking a cold coors light and learning about boats

« **Reply #263 on:** March 29, 2016, 08:58:22 PM »

Nice !!!

Sent from my iPhone using SoCal Jet Boats

« **Reply #264 on:** March 29, 2016, 09:02:28 PM »

Can't wait to see it!

« **Reply #265 on:** March 29, 2016, 11:26:38 PM »

That was a good read Sammy. It's definitely been a long road to get it where it is now. You do some killer paint work. Can't wait to see this thing finished.

Sent from my iPad using SoCal Jet Boats

« **Reply #266 on:** March 30, 2016, 02:42:23 PM »

Sam sent me some clips of his dyno pull last night. I put it into a small video. Check it out here!

« **Reply #267 on:** March 30, 2016, 05:12:11 PM »

Just got word from Andy Ralls that's it's a green light to bring him the motor! It's going straight to his shop from Paul Pfaffs... Andys gonna start getting some ideas for motor plates, plumbing exc.. It's on !!!!

« **Reply #268 on:** March 30, 2016, 05:12:52 PM »

No holding me back now !!! 👍👍

« **Reply #269 on:** March 30, 2016, 05:19:40 PM »

About damn time. Can't wait to see it on the water

Gimme that BECKY!

« **Reply #270 on:** March 30, 2016, 06:52:50 PM »

Can't wait to see this thing done! You gonna get it wet this summer?

Sent from my iPhone using SoCal Jet Boats

« **Reply #271 on:** April 10, 2016, 08:14:01 PM »

@BCouey yup that's the plan. I pick the motor up from dyno shop this week and will be taking it along with a few parts straight to Andy at Ralls Precision Machine in Santee CA for him to start making motor plates, throttle linkage, plumbing exc. He will be doing all the rigging on the boat and Zack will do one of hia bad ass wiring jobs on it.. Once I finish 2 wingers I'm painting at the moment I will be able to do the final paint on my pump and blend in the orange on the cap job I did on the Cheyenne. I'll start posting alot more pics of the progress for you to all follow along with. Any questions feel free to ask 👍

« **Reply #272 on:** April 10, 2016, 08:46:59 PM »

Can't wait to see it. Going to be a beautiful boat.

Sent from my iPhone using SoCal Jet Boats

« **Reply #273 on:** April 10, 2016, 09:28:03 PM »

Quote from: 19ftCheyenne on April 10, 2016, 08:14:01 PM

@BCouey yup that's the plan. I pick the motor up from dyno shop this week and will be taking it along with a few parts straight to Andy at Ralls Precision Machine in Santee CA for him to start making motor plates, throttle linkage, plumbing exc. He will be doing all the rigging on the boat and Zack will do one of hia bad ass wiring jobs on it.. Once I finish 2 wingers I'm painting at the moment I will be able to do the final paint on my pump and blend in the orange on the cap job I did on the Cheyenne. I'll start posting alot more pics of the progress for you to all follow along with. Any questions feel free to ask 👍

Right on man, looking forward to seeing it out!

Sent from my iPhone using SoCal Jet Boats

« **Reply #274 on:** May 12, 2016, 08:02:46 PM »

Is this really happening? So the fastest the motor has gone is 70mph so far haha. Just got down to Sante to meet up with Andy and let him take over from here 👍🔥🔥Hope to be on the water soon.

78Southwind

19ftCheyenne

jyeager

19ftCheyenne

78Southwind

78Southwind

78Southwind

Derrick

19ftCheyenne

81sprint

19ftCheyenne

19ftCheyenne

carrera202

73sidewinderguy

81sprint

Nos2Fly

Brad @ SCJB

19ftCheyenne

19ftCheyenne

capogniracing

BCouey

19ftCheyenne

Derrick

BCouey

19ftCheyenne