So I picked up this project a few months ago from Sam. I havent really said much about it because I haven't had much time to work on it. Its complete minus pump and motor. I plan on capping it and giving it a fresh paint job. The bottom has been blueprinted by MPD and jack also did the intake/shoe/plate setup. The boat is solid all around, it just needs some cosmetic love. Things i need are a pump (i have a lead on one in Monterey), seats (gunna go with fiberglass buckets and a bench).....and lots of elbow grease.

Great looking project Brad Why you changing the seats, they look decent

they sit a bit too high in the boat. yeah, i can cut them down, but i would have to reupholster them anyways to match the new color(s) i will pain it....i just like the look of buckets/bench better 

Is this the new cruiser?
Or you gonna race it?


Sent from my iPhone using SoCalJetBoats mobile app

its the new play boat 

Very nice
I got a buddy that has a 496 600hp
He wants $4500


Sent from my iPhone using SoCalJetBoats mobile app

I dont have that kind of coin layin around. I have a few ford motors I am going to Frankenstein together for this.

those are some sweet rims 

just leave the colors and cal it joker  if you need anything fabbed up or some material let me know i might have some stuff for ya

What are you gonna do with the seats that are in it? I need a bench for mine i could always have it re covered ? Looks like itll be a nice cruiser tho

Ok ill watch for the post if i dont find a fiber glass one first

Sweet, I saw this thing a few years back  in person before joining Scjb. I really like the top deck, pretty cool looking. So your up to 2 cruisers and a race boat now? I take you really like boats lol.

Didn't you buy another boat, Heat wave or something like that. The yellow and orange one with the big black scoop?

There was a member here by the name of Alecd who posted a thread looking for wheels and a member in your area had sset for cheap that he didn't pick up

So I picked up a Pump....so that's taken care of.

I pulled off the cover yesterday and assessed the situation....

All the cables still move freely. The Stringers are 24" wide and I have a 25.5" wide rail kit I had in the liberty before I custom made the one I have now. I can trim that down to work. The trailer is on blocks (long story). I might just swap the wheels off the liberty since its not goin anywhere anytime soon.

The motor thats going in this needs new bearings, gaskets, etc. I also need an oil pump. I will probably just run a front sump pan for now and use the ignition and stuff from the race motor. The only thing I might need is a Carb. I only have the 1250cfm quickfuel carb from the race boat. I think thats a little too much carb for a 460ci motor lol.

TI need a set of wheels for this trailer as its sitting on blocks right now.

I may have two rims (not the prettiest) laying around for your trailer. I wouldn't trust the rubber on them though.

Let me know and I can post up some pictures.