SoCal Jet Boats
Tech Talk => Projects => Topic started by: GT Jets on September 23, 2012, 09:08:35 PM
-
So, since I didn't have enough to do...... :screwy:
My buddy picked up a used Ski Sanger with some issues.... Carb needs rebuild, Velvet Drive shaft seal got damaged after the prop shaft pulled in the flex ducting from the bilge blower and wound it all the way up... ???
Steering was all froze up, trailer bunk rotted all the way through, interior was TOAST, some areas of the floor were rotted pretty good, among some other small things.
I will try to upload some pictures later today. The reason I am doing this for him is he is going to help me get my Carrera Gel coated... :thumbup: :thumbup:
Not only that, but he just bought a vacation house at Clear Lake with a dock and everything. :sly:
GT
-
Sounds like a good winter project that deserves a photo album.
Sent from my ADR6400L using Tapatalk 2
-
I took a bunch of pictures today..
I am fast tracking this particular project because he wants to use it at clear lake before winter starts setting in... :thumbup:
Some of the dry rot... :thumbdown:
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120923_151152_zps4f3b1ae8.jpg&hash=3eb793874cbc1f9c4eed8dacc8304ff752bb4b5b)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120923_151104_zpsccc9d01e.jpg&hash=7f90c1b77d256dcfcb02c06318aed9b3047a7aa2)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120923_151053_zpsf5578348.jpg&hash=382688ab3bf06379a05883f15e67bebd2f970a87)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120923_151221_zps2b329b3d.jpg&hash=09d741cebfb2e15013a1ed37cd4a2d61d6f3a288)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2FP9231384_zps8888963a.jpg&hash=b69cba91a97673c39fe5449658ac94da8a107f32)
Pretty spiffy wiring eh?
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120923_211308_zps3a691dbe.jpg&hash=df5bea232ca07c0434c0bf10e9f879ebde710d8e)
There is a bunch of wire from that plastic hose ducting wound in there somewhere... :screwy:
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2FP9231379_zps4db8d99c.jpg&hash=8d9b830df6f644f446be002290b5f1a4ad1a8637)
The wood is literally gone... :-\
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120923_153004_zpsd05b982f.jpg&hash=947a7e9e3b5ec876d8621a8f80d213bd08ddc1d9)
The tongue jack had no threaded rod...It was missing...Luckily, I never throw anything away and had an old bent jack....Stole the rod out of it and VIOLA!...
Before
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120923_151303_zpsd8890686.jpg&hash=889ca367234058c7c70a9addb7376a068d5cd66f)
After
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120923_211234_zps50a08410.jpg&hash=35dfb9f8a9f1634278ba7526a9e9e5daffbe6732)
What a cheesy way to do stuff...This is factory...It was held in with four drywall screws.. :screwy:
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120923_151438_zps622cab71.jpg&hash=04399bc9cde890f02671893997d7467ee285e443)
I think there is some room for improvement here.. ;)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2FP9231380_zpsf069ef8b.jpg&hash=cb3415594533ae82f6825d37c037f89a61867abc)
Really not sure how I get myself in these situations. :-\
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2FP9231386_zpsc857f039.jpg&hash=b35b698f0a0699bacf8ed9439f18db08ab9cde14)
GT
-
That's a full time job to get it done and done well before winter.
Even my little project was in excellent shape before I tore it apart... When on doubt, rip it out! Sh*t snowballs.
Sent from my ADR6400L using Tapatalk 2
-
theres a lot of standing water in that float. no way to escape? it hasnt rained in weeks and its still wet? i cant imagine someone used it recently in that condition with stuff falling apart like that. trapped water?
-
theres a lot of standing water in that float. no way to escape? it hasnt rained in weeks and its still wet? i cant imagine someone used it recently in that condition with stuff falling apart like that. trapped water?
The boat was owned by a dude that let it sit out in the open for a season then my buddy (they guy that owns it) bought a cover for it. :sly:
He finally sold it to him but not before it sat with about a foot and a half of water in it for several months.
The water you see in there is from me with the pressure washer and some laundry detergent...The Borg Warner velvet drive rear seal failed (read above) and there was Dexron all over everything, the boat has been inside a shop for about two years now, she was bone dry...However the damage had already been done. :thumbdown:
So I got the transmission apart tonight... :thumbdown:
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2FTransmission.jpg&hash=165b958aa678eb7635ddb5607bc239adeef3b461)
So much of that wire got into the rear seal it destroyed the bearing insert...
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2FBearing.jpg&hash=660c8461ed457b12ae1c263d03703e0d37155dde)
Look at all the crap I pulled out from behind the seal.. :screwy: This is after cutting about 6' of wire out of the seal wrapped around it like an Anaconda. :screwy:
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2FRearsealarea.jpg&hash=dbfb97f6e653ec3c08b2f9db80ef1d1349987f37)
More to follow. :thumbup:
GT
-
If you look at the last picture of the first post you will note the water line in the carpet... :screwy: :screwy: :screwy: :screwy: :-\
GT
-
Got the interior today...Pics when I get it all unloaded...Friggen beautiful... :thumbup: :thumbup:
Now I gotta haul ass on this thing... :screwy:
GT
-
Doin work!
Sent from my ADR6400L using Tapatalk 2
-
As promised...
This is the dude that's doing my Carrera...You can't really see in in the pic for some reason, but the white is a little pearly.... :thumbup: :thumbup:
And yes, the boat is white with dark green graphics with a touch of gray here and there...
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120925_212838.jpg&hash=542556bc51c542354a8d834b730e8ba450e31203)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120925_212830.jpg&hash=56890b349f8985f64adf9d046be95752f71167d6)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120925_212806.jpg&hash=6e6deade7ed68d23ef366f338ee25a2771dd0d68)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120925_212744.jpg&hash=e2e7dcb4e1bc756796c529b041294af9ff1bc507)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120925_212725.jpg&hash=40129d055e77e4c8dbb527358855ffff316986c2)
And the carpet, it is silvery...If thats a word.. :-\
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120925_212917.jpg&hash=ee5c02123b6c911d43a5e7f4a4b0b9ef5245ebcb)
Lots of parts.... :screwy:
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120925_212843.jpg&hash=77e78b8f1bcefec477573f361b9fb54a1baf58bc)
Should have my bearing tomorrow...This thing is almost mechanically done...
GT
-
good lord man, :banghead:
-
"small job"
mmm hmm. :beer:
-
Man looks like a lot of work, thouse seats look great
-
Got a little further today... After working a 13 hour day at work, decided to get a little something something done on the boat...
After talking with my bud, we're going all in on this dealio...
Ripping all the floors an bulkheads out due to an undiscovered lake inside the hull... :thumbdown:
The things we do for friends... :screwy:
So here is where I am at, gotta stop because I gotta be back at work again tomorrow at 6AM... :o I feel like a walking zombie. :-\ :P All I really wanted was a couple :beer: :beer:
Here is the long lost lake...Smelled like baboon shit. :P
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120929_191125.jpg&hash=dd1af213130b722c70a827a9640030eb80775c03)
Just took a section out to spot check the stringers...Good to go. :thumbup:
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120929_190434.jpg&hash=be61fdc9bfe33162cec35bf4e4561099117ddd6e)
Maybe I can glue it back together? ::)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120929_191322.jpg&hash=e805f0724c4337806f5ebaf5daad2108d71c4907)
I really need better friends.... ;D
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120929_190456.jpg&hash=eaa40ee4b102c2392ee0c035fc97033c4e151fbd)
These are factory fasteners...Drywall screws, and not very many.. :screwy: :thumbdown:
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi650.photobucket.com%2Falbums%2Fuu224%2FGTJets%2FProjects%2F20120929_191358.jpg&hash=9f573b05254fb2d779735dd4944c9b4be5f6eb33)
More when I am awake.
GT
-
I'd a taken the beers.
Sent from my ADR6400L using Tapatalk 2
-
Sooooo, OK I have finally gotten this POS on the road to recovery, have not updated the thread the way i should have, but I have not been working on it hard as I should either...
After repairing the trailer brakes, installing all new wood floors, stringers and bulkheads, all new carpet, getting all the interior installed, replacing the bad fuel pump, rebuilding the carburetor, repairing the Velvet Drive, installing a new alternator, new starter, new fuel hose, new exhaust riser gaskets, new bilge pump, new bilge blower, fixing the redneck electrical, flow coating the bilge, aligning the propshaft, rebuilding the tilt steering column, correcting a bent steering guide tube, installing new bunks on the trailer among all the other stuff I am sure I forgot to mention.....
I could not get it to idle very well.
Come to find out after a compression check, she is hurt bad enough to show "0" for a compression reading on number 8 and 20 PSI on number 3.... I told him several times that this thing was tired.... I didn't think it was dead though.... :thumbdown:
This boat should have been turned into a kids sandbox... :o
I love boats. :banghead:
Luckily this guy is an automotive machinist... ;)
GT
I have a buttload of pics, too tired to deal with it right now.