SoCal Jet Boats
Tech Talk => Projects => Topic started by: jayare92 on December 15, 2014, 11:29:32 PM
-
So right now my boat has this goofy honda civic looking steering wheel from when i got it. Im looking around for a new one. Will i have to buy a new hub also and if so what hub would i need to use? I have a steering helm system if that helps any. The first pic is my current wheel 2nd is the one im looking to buy.
-
You will need to figure out how many bolts your current setup uses to mount the wheel and the go to cp performance or Rex marine and get a hub to mount the wheel.
Sent from my iPhone using SoCalJetBoats mobile app
-
You will need to figure out how many bolts your current setup uses to mount the wheel and the go to cp performance or Rex marine and get a hub to mount the wheel.
Sent from my iPhone using SoCalJetBoats mobile app
i dont believe i see any bolts. It looks like its just pressed onto a 3/4 tapered shaft as i need to get a steering wheel puller to get it off.
-
So i got my steering wheel off finally. All thats used is a 3/4 tapered bolt with a keyway. Now to order my new wheel. What hub would i need? My current wheel didnt have any hub at all it was just a plastic cover behind the wheel.
-
It will look like this and you have to get a hub to match the bolt pattern of the steering wheel
-
It will look like this and you have to get a hub to match the bolt pattern of the steering wheel
ok cool thanks. Sorry for it was a newb question. First boat still learning everything haha