SoCal Jet Boats
Tech Talk => Projects => Topic started by: el mojado on April 07, 2015, 08:11:26 PM
-
I'm thinking about making my own swim steps. I found oak that I think will work. What do I use to seal/finish the wood? What are your opinions? Thanks.
-
i would use epoxy. may take a few coats as oak has an open grain. if you wanted a super high gloss look...thats definitely the way to go.
id have to do some research otherwise. i know of a product called waterlox. great stuff. doest build like epoxy and gives a more finished wood look....not encapsulating like epoxy.
-
Using a higher grit sandpaper could help tighten the grain up. I use higher sandpaper on the ends of wood compared to the length so they stain evenly.
Sent from my iPhone using SoCal Jet Boats
-
when we've built Kitchen cabinets for ....we've warned people about the grain of oak. Very difficult To impossoble getting it super smooth like other species of wood. nature of oak.... sometimes it out gases or creates bubbles in finish. It's a good looking wood. Just gotta work with it a little different that other species.
-
The type of oak makes a difference between white and red, among others.
Sent from my iPhone using SoCal Jet Boats
-
This is true...
Which ever way you go on wood or finishing product... take pics please....