SoCal Jet Boats

Classifieds => Random Boat Parts For Sale => Topic started by: GT Jets on March 28, 2009, 09:03:59 PM

Title: GT's too good to throw away sale....
Post by: GT Jets on March 28, 2009, 09:03:59 PM: OK, here's the deal, I need to clear up some space to get my Carrera build going....

I have an absolute ton of parts for any kind of powerboat you can name, someone here needs some of this treasure :sly:

I have 2-real nice "Bullet" fuel tanks, 10 gal, aluminum with Black powdercoated brackets, $275 or offer...

2-Stainless steel "Destroyer" steeing wheels, a 16" and an 18" in perfect condition, $40 ea. or offer...

2-late model (1997-2000) Vortec small Chevy (5.7L, 350 cu. in.) cylinder heads, ready to bolt on (they have 10 hours on them)$200 or offer...

Misc. Big Block Chevy stuff; valve covers, oil pans, Camshaft, rods, all kinds of misc. trinkets...let me know what you be needin'...

Misc. Berkeley stuff, suction pieces, intakes, TA's, shafts, loaders, rudders, C bowls, whatever, lemme know...

1-20' single axle trailer for a vee hull, 4500# axle with brakes, registered and have pink, $750 or offer.

1-22' tandem axle trailer, EZ Loader, should be able to win the ugliest trailer award hands down, but in perfect working order $400 or offer...

Mercury I/O propellers, all stainless, will also work on large case outboards; Cleavers, Choppers, round ear 21-28" pitch. let me know what you need..$275 ea. make offer...

Edlebrock Performer for peanut heads (truck heads), non EGR, in fair condition $50 or offer...

Misc. trailer parts, leaf springs, fender mounts, floater bars, wierd stuff...lemme know what your looking for...

Campbell/Spectra style anchor light, chrome, in perfect condition, removeable type, $40 or offer...

Mallory Marine points distributor for small/large Chevy, almost perfect, with newer cap/rotor, still has points and would be perfect for conversion $40 or offer...

I could go on all night, I need to get some cash together to get my Carrera water ready (already burned through my boat budget scratch :screwy:)..pics on request...

GT
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 28, 2009, 09:31:47 PM: Forgot some stuff..

Cast iron intake manifolds for big/small Chevy , $30 ea. /offer...

Almost new Big block Chevy Mercruiser center riser exhaust manifolds and risers (motor was two weeks old when removed) $250 or offer...

Starters, alternators, water pumps, fuel pumps (mechanical), all marine or automotive and all Chevy, lemme know your needs...Fair prices...I can build you one too, if needed.

As I get my storage cleaned out I will update this thread, I'm balls deep in extra stuff and am giving up my shop to save dollars :mad:

GT
Title: Re: GT's too good to throw away sale....
Post by: Baja and Bust on March 28, 2009, 09:33:57 PM: Details on the 22' EZ Loader trailer... Por favor.
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 28, 2009, 09:38:31 PM: Quote from: Baja and Bust on March 28, 2009, 09:33:57 PM
Details on the 22' EZ Loader trailer... Por favor.

It's the wobble roller trailer, it's got a Baby blue box tube frame and bare aluminum brackets with the big "bread box" square fenders, descent tires, brakes seem to work pretty good, has a spare tire but it's flat and has a two speed hand winch, I can get a pic tomorrow, but its pretty ugly..

GT
Title: Re: GT's too good to throw away sale....
Post by: Baja and Bust on March 28, 2009, 09:41:14 PM: A pic would be appreciated to get a better idea. Doesn't have to be pretty. Would be finding a new home at our place in Baja where the trailer for the IMP is most likely uglier than yours, and not very operable. Thanks.
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 28, 2009, 09:43:50 PM: Quote from: Baja and Bust on March 28, 2009, 09:41:14 PM
A pic would be appreciated to get a better idea. Doesn't have to be pretty. Would be finding a new home at our place in Baja where the trailer for the IMP is most likely uglier than yours, and not very operable. Thanks.

How ironic is it there is an IMP on it now? want the boat too?, I'll knock $50 off the price of the trailer... ;D
Title: Re: GT's too good to throw away sale....
Post by: Baja and Bust on March 28, 2009, 10:01:57 PM: LMFAO! That is pretty ironic. Don't know though, I might just have to take a package deal with a pair or both pairs of the vortec heads.... The SkipJack and the "NoBucks" truck would both benefit nicely from that...

[attachimg=#]

It's been rolled and sank, but it's still going strong...
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 28, 2009, 10:29:34 PM: That things a creampuff LOL

For the record, I only have one set of Vortecs, but I can get all you need ;D

Here is a pic of the Steering wheels in case anyone is interested...

[attachimg=#]

[attachimg=#]

The second one has a hydraulic helm attatched and is now removed, (available as a seperate purchase)..

GT
Title: Re: GT's too good to throw away sale....
Post by: propless on March 28, 2009, 11:29:00 PM: I'm going to need a more complete list of what you have. ;D

Did I see something about a 28" pitch prop ? Is it a through hub ? What others do you have ? Got any duel cable steering systems hidden in there ?

Quote from: GT Jets on March 28, 2009, 10:29:34 PM

The second one has a hydraulic helm attatched and is now removed, (available as a seperate purchase)..

GT
Do you have a complete hydraulic system ?
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 29, 2009, 09:32:43 AM: Quote from: propless on March 28, 2009, 11:29:00 PM
I'm going to need a more complete list of what you have. ;D

Did I see something about a 28" pitch prop ? Is it a through hub ? What others do you have ? Got any duel cable steering systems hidden in there ?

Do you have a complete hydraulic system ?

Yes I do...we could even build or buy the linkage kit necissary to make it work great on a whacker.....It is in need of new lines, which it just uses compression fitting poly tubing.. ;)

No dual cable stuff though, you can buy the stuff so cheap I always just used new stuff for that.

I will get you a list of props over say 25" pitch..

GT
Title: Re: GT's too good to throw away sale....
Post by: propless on March 29, 2009, 10:20:53 AM: Quote from: GT Jets on March 29, 2009, 09:32:43 AM

Yes I do...we could even build or buy the linkage kit necissary to make it work great on a whacker.....It is in need of new lines, which it just uses compression fitting poly tubing.. ;)

No dual cable stuff though, you can buy the stuff so cheap I always just used new stuff for that.

I will get you a list of props over say 25" pitch..

GT

Thanks GT,

I wish I could just buy buy new steering for that thing (duel cable) but I haven't found anyone that makes a similar system anymore. It is/was a rotary with one cable on each side of the boat (Morse command 2), it would be nice to be able to use the same cable holes in the transom (cables are beyond junk).

Let me know how much for the hydraulic system. Everyone says it should have one on that big beast anyway, if I want to turn it under power. :-\

I hope you have some BIG boxes (for shipping) ;D
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 29, 2009, 10:29:01 AM: Quote from: propless on March 29, 2009, 10:20:53 AM
Thanks GT,

I wish I could just buy buy new steering for that thing (duel cable) but I haven't found anyone that makes a similar system anymore. It is/was a rotary with one cable on each side of the boat (Morse command 2), it would be nice to be able to use the same cable holes in the transom (cables are beyond junk).

Let me know how much for the hydraulic system. Everyone says it should have one on that big beast anyway, if I want to turn it under power. :-\

I hope you have some BIG boxes (for shipping) ;D

Can't you just replace the cables?, Morse stuff is still pretty available, I can sell you this hydraulic system cheaper than you can buy the cables, it will need a minor "go-through" but it works, took it out of a running boat to install auto-pilot a while back...

I have two helms and one hydro ram, should be able to make something fly (so to speak)...

I'll go and get some pics and see if its a challenge you want to meet head on...(it's a lot easier than you might think...)
Title: Re: GT's too good to throw away sale....
Post by: propless on March 29, 2009, 10:45:18 AM: Cables are listed as obsolete. :banghead:

My only chance was to find a duel cable rack system that could mount the cables in opposite directions (push-pull). But I was told a hydraulic system would be way better for this thing (easier to turn).
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 29, 2009, 10:50:00 AM: Quote from: propless on March 29, 2009, 10:45:18 AM
Cables are listed as obsolete. :banghead:

My only chance was to find a duel cable rack system that could mount the cables in opposite directions (push-pull). But I was told a hydraulic system would be way better for this thing (easier to turn).

Definately easy to turn with no feedback (you could turn the wheel with a wet spagetti noodle)..

GT
Title: Re: GT's too good to throw away sale....
Post by: schick on March 29, 2009, 11:08:42 AM: Hey GT, Do you have a "R" Berkley intake laying around? I also need a PTO flange for a 454. Shoot me a price. Did you get over that sickness? Was some bad sheet. Thanks, Schick
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 29, 2009, 11:15:27 AM: Quote from: schick on March 29, 2009, 11:08:42 AM
Hey GT, Do you have a "R" Berkley intake laying around? I also need a PTO flange for a 454. Shoot me a price. Did you get over that sickness? Was some bad sheet. Thanks, Schick

Yeah, back to "ten foot tall and bulletproof" LOL, thanks, I have a PTO but it comes with the whole boat :sly: I don't have any extras though, I've been giving stuff to my racing buddy and I think he trades the stuff for beer or something ??? You will need to know which one; flywheel, flexplate, late or early, you can use a flywheel on a flex with a little work...Tom should have one though (JBP)

As for the intake, I have a few different ones, do you know the Berkeley part number you need?

Otherwise I'll post some pics.

GT
Title: Re: GT's too good to throw away sale....
Post by: schick on March 29, 2009, 11:54:16 AM: The PTO is for a flex plate, mark 4. The intake number is H2663. Thanks for the fast reply. schick
Title: Re: GT's too good to throw away sale....
Post by: schick on March 29, 2009, 03:58:39 PM: Hey GT, Do you have any aluminum bbc rods? Thanks, schick
Title: Re: GT's too good to throw away sale....
Post by: OC2Vegas on March 29, 2009, 04:05:17 PM: Quote from: schick on March 29, 2009, 03:58:39 PM
Hey GT, Do you have any aluminum bbc rods? Thanks, schick

I think 2sav has a set for $50 heys trying to sell. I will see if I can find the link....

Here it is:

http://www.socaljetboats.com/index.php?topic=6459.0 (http://www.socaljetboats.com/index.php?topic=6459.0)

GT, dont mean to step on your toes if you have a set :-*
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 29, 2009, 04:10:21 PM: I have never used aluminum rods, I always used either powdered metal or GM "I" beams, so I don't have any, I went and checked for a PTO, they are both Olds (Old style and new style).

Quote from: OC2Vegas on March 29, 2009, 04:05:17 PM

GT, dont mean to step on your toes if you have a set :-*

No sweat there OC! ;)

GT
Title: Re: GT's too good to throw away sale....
Post by: schick on March 29, 2009, 05:41:17 PM: Thanks for checking, and for the info, schick
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 29, 2009, 06:23:44 PM: No problemo schick..

Here are some of the things I had to move around, more to follow, trust me..

[attachimg=#]

[attachimg=#]

Told you it was Fugly

[attachimg=#]

[attachimg=#]

That big silver triangular dealio is a set of fender brackets and the leaf spring ...I have two each of those V&M Trailer parts...

GT
Title: Re: GT's too good to throw away sale....
Post by: IRRebel on March 29, 2009, 07:20:03 PM: How much for the SS Minnow? And do you deliver? I have a plan! ;D

Ray
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 29, 2009, 07:26:09 PM: Quote from: IRRebel on March 29, 2009, 07:20:03 PM
How much for the SS Minnow? And do you deliver? I have a plan! ;D

Ray

I'll tell you what, come get it for $400 bucks with the trailer and I'll fill your gas tank and buy you a burrito for lunch ;)

Gotta tell you, we named the boat the Shitty Kitty, or since we live in California "el Gato Caca", there were some cats taking refuge in the cabin, tough to clean, let me tell you :P A gallon of bleach and a gallon of Simple Green and a 3500# pressure washer

GT
Title: Re: GT's too good to throw away sale....
Post by: IRRebel on March 29, 2009, 08:20:13 PM: I dun wanna spend $400 on something I plan to sink for giggles, Glen, are you and I both nuts? (What am I SAYING, I almost sank about $7g's at Mead)

The trailer might come in handy, but it looks about as fugly as the boat. Maybe launch the boat, toss the trailer on top, tow 'em out to the middle of SAguaro lake, or other, THEN sink 'em both? I'll pay the fine for pictures of that, ;D

Sounds like an SCJB event to me! Better than calling Brad up in the middle of the night in a drunken stuper playing, "I'm on a Boat"

Sinking a weedwhacker!

Ray
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 29, 2009, 08:26:15 PM: Quote from: IRRebel on March 29, 2009, 08:20:13 PM
I dun wanna spend $400 on something I plan to sink for giggles, Glen, are you and I both nuts? (What am I SAYING, I almost sank about $7g's at Mead)

The trailer might come in handy, but it looks about as fugly as the boat. Maybe launch the boat, toss the trailer on top, tow 'em out to the middle of SAguaro lake, or other, THEN sink 'em both? I'll pay the fine for pictures of that, ;D

Sounds like an SCJB event to me! Better than calling Brad up in the middle of the night in a drunken stuper playing, "I'm on a Boat"

Sinking a weedwhacker!

Ray

Yeah, but you forgot the burrito...Besides, I don't think this thing will sink, it has more foam than a mall snowman! :sly:

And believe it or not, this is where most, if not all of my drivetrain parts came from for the Carrera, I'm sticking a 330HP Small block in front of the drive that came out of this boat, as for the crazy....RIght there with you...BTW I don't see anything wrong with calling Brad in the all hours to share music >:D

GT
Title: Re: GT's too good to throw away sale....
Post by: turbo350r on March 29, 2009, 09:02:56 PM: Can I get a pix of the Campbell/Spectra style anchor light, chrome, in perfect condition, removeable type, $40 or offer...

Thanks Turbo350r
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 29, 2009, 10:31:03 PM: Quote from: turbo350r on March 29, 2009, 09:02:56 PM
Can I get a pix of the Campbell/Spectra style anchor light, chrome, in perfect condition, removeable type, $40 or offer...

Thanks Turbo350r

Get that for you tomorrow.... ;)

GT
Title: Re: GT's too good to throw away sale....
Post by: RiverLizard85 on March 30, 2009, 10:37:54 AM: Do you have any single carburetor air scoops?
Title: Re: GT's too good to throw away sale....
Post by: SnoC653 on March 30, 2009, 07:43:14 PM: How much for this floater bar shipped to Keokuk, IA 52632? (https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.performanceboats.com%2Fhtml%2Fforums%2Fpicture.php%3Falbumid%3D190%26amp%3Bpictureid%3D4633&hash=d77558e78d9cbc5c9f7560bca66a2cfc8260c92f)
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 30, 2009, 08:22:25 PM: Quote from: RiverLizard85 on March 30, 2009, 10:37:54 AM
Do you have any single carburetor air scoops?

I don't think so, but I'll check. ;)

GT
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 30, 2009, 08:23:30 PM: Quote from: SnoC653 on March 30, 2009, 07:43:14 PM
How much for this floater bar shipped to Keokuk, IA 52632? (https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.performanceboats.com%2Fhtml%2Fforums%2Fpicture.php%3Falbumid%3D190%26amp%3Bpictureid%3D4633&hash=d77558e78d9cbc5c9f7560bca66a2cfc8260c92f)

I'll get it weighed, the shipping will cost more than the bar.

GT
Title: Re: GT's too good to throw away sale....
Post by: sandman on March 30, 2009, 11:30:06 PM: GT,
Hey buy chance you got a marine offset mount starter for bbc? if you do how much?
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on March 30, 2009, 11:48:31 PM: Quote from: sandman on March 30, 2009, 11:30:06 PM
GT,
Hey buy chance you got a marine offset mount starter for bbc? if you do how much?

Assuming here...Offset being large flywheel? (168 Tooth)

Or offset meaning rear mount?

I have a rear mount and two straight patterns (153 tooth) but think I have a good marine drive housing at the barn, if I do, I'll change it out for you, it's a GM high torque (double wound stator) Marine deal, get pics this week, all fresh stuff bench tested ready to play $40, gotta figure out how to get it to you (heavy), if you go get a reman, I may be able to get the marine parts to you also (I can tell/show you how to convert it...

GT
Title: Re: GT's too good to throw away sale....
Post by: Baja and Bust on April 02, 2009, 06:16:14 PM: Wow, you weren't kidding... That thing is FUGLY! That IMP is bigger than ours and don't know if it would fit on the trailer. Our trailer is definitely fuglier though... Wish I had a pic of it.
Title: Re: GT's too good to throw away sale....
Post by: sandman on April 02, 2009, 09:10:23 PM: Quote from: GT Jets on March 30, 2009, 11:48:31 PM
Assuming here...Offset being large flywheel? (168 Tooth)

Or offset meaning rear mount?

I have a rear mount and two straight patterns (153 tooth) but think I have a good marine drive housing at the barn, if I do, I'll change it out for you, it's a GM high torque (double wound stator) Marine deal, get pics this week, all fresh stuff bench tested ready to play $40, gotta figure out how to get it to you (heavy), if you go get a reman, I may be able to get the marine parts to you also (I can tell/show you how to convert it...

GT

Well im interested but ya the shipping might be crazy huh? weel post some picks maybe we can figure something out

Mike
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on April 02, 2009, 09:21:10 PM: Quote from: Baja and Bust on April 02, 2009, 06:16:14 PM
Wow, you weren't kidding... That thing is FUGLY! That IMP is bigger than ours and don't know if it would fit on the trailer. Our trailer is definitely fuglier though... Wish I had a pic of it.

If you want the trailer lemme know, I think it measures 23' overall, but it's a roller trailer (no bunks) so would fit boats from 19' to 22' with a few simple adjusments, there are literally no welds on this trailer, totally bolted together, I am going to pressure wash it and hit it with some rust stop on Sunday, there is some surface rust that makes it uglier than it deserves....

GT
Title: Re: GT's too good to throw away sale....
Post by: motorhome6 on April 02, 2009, 11:01:08 PM: GT save me the berkley jet rudder ,I'll take that plus whatever else I can come up with that I might need and you might have ok thanks I know your pretty busy still
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on April 03, 2009, 12:21:51 AM: Quote from: motorhome6 on April 02, 2009, 11:01:08 PM
GT save me the berkley jet rudder ,I'll take that plus whatever else I can come up with that I might need and you might have ok thanks I know your pretty busy still

Sorry motorhome, it's all yours, lemme know what your in need of and I'll see what I can do, I have to work Saturday, but will possibly get some time Sunday to get my crap together....I hope :-\

GT
Title: Re: GT's too good to throw away sale....
Post by: maddogg20 on April 05, 2009, 07:50:35 PM: hey buddy :-) do you have any alternators in good shape? I have a custom built 1 wire alt but I dont know if I trust it. Also, do you have a setup that would cover the flexplate? because im using a rail kit and the plates exposed.
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on April 05, 2009, 10:43:27 PM: Quote from: maddogg20 on April 05, 2009, 07:50:35 PM
hey buddy :-) do you have any alternators in good shape? I have a custom built 1 wire alt but I dont know if I trust it. Also, do you have a setup that would cover the flexplate? because im using a rail kit and the plates exposed.

Maddog, I will check out this alternator tomorrow, it came off my Bahner and was running when it was pulled, but it will be checked and I will let you know, as for the bell housing I just sold one last week at the swap meet and don't have any extras.

GT
Title: Re: GT's too good to throw away sale....
Post by: SnoC653 on April 06, 2009, 06:22:28 PM: Did you figure out the shipping for the bar to Iowa?
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on April 06, 2009, 09:13:46 PM: Quote from: SnoC653 on April 06, 2009, 06:22:28 PM
Did you figure out the shipping for the bar to Iowa?
You were serious?, I'll find out in the AM, I'll post it when I find out, had meetings all day.

GT
Title: Re: GT's too good to throw away sale....
Post by: SnoC653 on April 07, 2009, 04:51:18 AM: I figure it is better to have the right part that fits the competitive trailer than to rig something up and have the boat wind up on the highway. Towing it back from Cali it tried to leave the trailer both forward and backwards off the trailer. Don't need it in any rush but I was serious about it.
Title: Re: GT's too good to throw away sale....
Post by: motorhome6 on April 10, 2009, 01:28:07 PM: GT Jets check your PM's thanks
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on April 10, 2009, 05:17:10 PM: Quote from: motorhome6 on April 10, 2009, 01:28:07 PM
GT Jets check your PM's thanks

Back at you ;)

GT
Title: Re: GT's too good to throw away sale....
Post by: motorhome6 on April 15, 2009, 11:34:26 PM: i read about the fiber optics problem you had ,man what a mess that can be. Tell you what , I know your real busy with alot bigger sales than what I need so when your all done and get some breathing room and you see that rudder sitting in the middle of the floor by its self just remember who wants it. Summer is a few months away so I can wait ,just save it for me and send me a bill when your ready and that will work for me . thanks GT ;D GOOD LUCK WITH YOUR SALES
Title: Re: GT's too good to throw away sale....
Post by: bozz89 on April 18, 2009, 01:01:06 PM: Gt have any thing for a sbc? also for the trailer stuff do you have any fenders?
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on April 18, 2009, 01:38:01 PM: Quote from: bozz89 on April 18, 2009, 01:01:06 PM
Gt have any thing for a sbc? also for the trailer stuff do you have any fenders?

What do you need for the mouse? The only fenders I have are junk single axle deals in the scrap pile...

GT
Title: Re: GT's too good to throw away sale....
Post by: bozz89 on April 18, 2009, 03:34:15 PM: wut you got for it say maybe ignition system, intake, tunnle ram, manifolds for my thruhull conversion ;D, idk you have any thing?

thanks
-kyle
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on April 18, 2009, 04:33:04 PM: Quote from: bozz89 on April 18, 2009, 03:34:15 PM
wut you got for it say maybe ignition system, intake, tunnle ram, manifolds for my thruhull conversion ;D, idk you have any thing?

thanks
-kyle

I have a set of Vortec first gen. heads and the intake that goes with it (Iron), I have a complete Thunderbolt ignition system less Cap, no more tunnel rams, got a set of aluminum exhaust manifolds, but they are not center risers, a comple LT1 (not sure if I want to turn loose of that yet)...windage tray and bolts, purple powdercoated tall valve covers, I guess you could say a bunch of wierd crap.... :screwy:

GT
Title: Re: GT's too good to throw away sale....
Post by: bozz89 on April 18, 2009, 04:39:53 PM: got any pics of the exhaust manifolds and the ignition system? and how much? and wut is a windage tray? the motor i have is a 350 mercrusier motor 260hp think like a 79 to 92 block if that makes any sense idk but yea may be interested in the manifolds and ignition if it fits my motor thx...

-kyle
Title: Re: GT's too good to throw away sale....
Post by: NAFLASH on April 18, 2009, 08:14:50 PM: Windage tray mounts in the oil pan to minimize oil slosh and running the oil pump dry.
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on April 22, 2009, 10:35:16 PM: I have been busier than a cat covering up shit in a hurricane :screwy:

Sorry to all I have lagged on, will get to you soon I promise.

Had a couple of 100* days here and we got a little busy to say the least. It's Wednesday and I have 46 hours in already for the week :sly:

GT
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on April 29, 2009, 09:42:58 PM: Sold a jet pump and a steering cable and a foot throttle, maybe a set of heads :-\ motorhome I have not forgotten about you ;D, thanks fellas! (you know who you are :sly: ).

I need to sell more crap though.......... :banghead:

More than likely heading to SoCal this weekend, so shipping could potentially be on me if your down there, need to be in Pasadena, Anaheim, UCLA and possibly Whittier and don't forget friggen Disneyland :banghead:...Lemmeknow..

GT
Title: Re: GT's too good to throw away sale....
Post by: 77belmont on May 02, 2009, 05:50:02 AM: I see you have some props? Are they the small hub with the exhust over the prop or thru prop exhaust. Do you have a 25 p cleaver and a 26 p chopper? Can you send me some pics of them? thanks.
Title: Re: GT's too good to throw away sale....
Post by: motorhome6 on May 03, 2009, 09:35:43 PM: THANKS GT..........just waitin in the wings , whenever your ready
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on May 03, 2009, 09:38:01 PM: Quote from: 77belmont on May 02, 2009, 05:50:02 AM
I see you have some props? Are they the small hub with the exhust over the prop or thru prop exhaust. Do you have a 25 p cleaver and a 26 p chopper? Can you send me some pics of them? thanks.

Just walked in the door, I will get an actual inventory of all the unneeded props tomorrow...

GT
Title: Re: GT's too good to throw away sale....
Post by: IRRebel on May 03, 2009, 10:41:34 PM: Quote from: GT Jets on May 03, 2009, 09:38:01 PM
Just walked in the door, I will get an actual inventory of all the unneeded props tomorrow...

GT

All props are un-needed, right Glen?

Lol

Ray
Title: Re: GT's too good to throw away sale....
Post by: HDriderTH on May 04, 2009, 08:14:52 AM: Ohhh, I dunno......I need about a 11 1/4-15 or 16
Title: Re: GT's too good to throw away sale....
Post by: motorhome6 on May 04, 2009, 06:13:36 PM: Hey GT ,I'm in Anaheim, if you find that rudder under all your stuff , I could meet you somewhere i n Anaheim or somewhere near by. I kinda gave you a small list of other stuff I needed but told you if u didn't have it don't worry about gettin back to me cause I know how busy u are . I'm assuming since I didn't hear anything that nothin was there that I needed. I'll try to give u a call and see what you still have before you come down. Hey I better look at the date you were coming down ,maybe you've already been down here , in that case ......NEVER MIND. If you haven't made your trip then message still stands ;D motorhome 6
Title: Re: GT's too good to throw away sale....
Post by: motorhome6 on May 04, 2009, 06:24:15 PM: :banghead: :banghead: :banghead: Well since you were coming down this

p a s t weekend :banghead: :banghead: key word ..... PAST .... never mind we'll go back to original plan. I'd better watch these posts alittle closer. my fault :screwy:

motorhome 6
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on May 04, 2009, 08:12:05 PM: Quote from: motorhome6 on May 04, 2009, 06:24:15 PM
:banghead: :banghead: :banghead: Well since you were coming down this

p a s t weekend :banghead: :banghead: key word ..... PAST .... never mind we'll go back to original plan. I'd better watch these posts alittle closer. my fault :screwy:

motorhome 6

May need to go down this W/E too, will let you know ;)

GT
Title: Re: GT's too good to throw away sale....
Post by: motorhome6 on May 05, 2009, 02:58:23 PM: ok i'll PM you my ph number just in case thank's
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on May 15, 2009, 09:22:51 PM: Anybody need a belly tank for a cruiser? All aluminum and in pretty good condition, I will get some measurements tomorrow.

Lemmeknow... 8)

GT
Title: Re: GT's too good to throw away sale....
Post by: motorhome6 on May 16, 2009, 04:34:47 PM: hey GT, did ya run across that Berkley rudder yet ;D also I'm looking for t- handle pressure bypass valve, transom cover block off plates,oil drain kit, and should I be running a thermostat, I didn't put one in and now I'm wondering if I should have , (just thinkin out loud) also need battery mount like a billit one, alumn paddle , gettin close, summers commin

let me know if ya have any of that stuff ok......thanks bud
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on May 16, 2009, 04:49:35 PM: Quote from: motorhome6 on May 16, 2009, 04:34:47 PM
hey GT, did ya run across that Berkley rudder yet ;D also I'm looking for t- handle pressure bypass valve, transom cover block off plates,oil drain kit, and should I be running a thermostat, I didn't put one in and now I'm wondering if I should have , (just thinkin out loud) also need battery mount like a billit one, alumn paddle , gettin close, summers commin

let me know if ya have any of that stuff ok......thanks bud

motorhome,

I am actually going over to the shop when it cools off (it's over 100* here right now) and I will go through some boxes and get this thing for ya.

As far as your list, what transom cover block off's are you asking about? are these for blocking off the exhaust cut outs in the transome for thru hull exhaust? if so I have none...

As for the T-stat, it really depends on the way the motor is built, if the engine is built to automotive specs, I recommend a stat, otherwise you can regulate the temp with water flow, (less crap to fail).

The oil drain kit is a piece of cheddar...you need to know the thread sise and pitch of the drain plug hole, I have used banjo fittings in the past. I do have the big fitting that goes into the pan then you can use a flare to barb fitting in the outlet, work OK but are a little bulky...

My battery boxes until I got this plastic boat ;D LOL, have been welded into the hull :screwy: so I dont have any of those either.

The bypass valve is something better bought new, just because, if you know what I mean. Try either McMaster Carr, or Graingers.

I will give you a call when I have it in my hand (the rudder ;))

GT
Title: Re: GT's too good to throw away sale....
Post by: motorhome6 on May 17, 2009, 12:47:59 PM: GT ,don't spend alot of your time looking for the rudder if you don't see it right away, I was mostly givin you a polite reminder ;D cause I know how busy you've been. I'm sure if you don't see it today you'll run across it soon, besides my boat isn't going too see the water for another month or so and 100 degrees.......holy crap summers here already ??? Yipeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

motorhome6
Title: Re: GT's too good to throw away sale....
Post by: motorhome6 on May 17, 2009, 12:50:37 PM: oh yeah , thank's for the info ................!
Title: 12JC ruddeer
Post by: povertyjet on May 17, 2009, 02:58:26 PM: Quote from: motorhome6 on May 17, 2009, 12:47:59 PM
GT ,don't spend alot of your time looking for the rudder if you don't see it right away, I was mostly givin you a polite reminder ;D cause I know how busy you've been. I'm sure if you don't see it today you'll run across it soon, besides my boat isn't going too see the water for another month or so and 100 degrees.......holy crap summers here already ??? Yipeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

motorhome6

WARNING!!! SHAMELESS THREADJACK

Hey Motorhome,
If GT is to busy for you, I got a brand spankin new 12JC rudder and pin in my hand for ya, live in HB.

Sorry GT, you gotta step it up! hheehho hmm

xoxo
p-jet
Title: Re: 12JC ruddeer
Post by: GT Jets on May 17, 2009, 03:34:47 PM: Quote from: povertyjet on May 17, 2009, 02:58:26 PM
WARNING!!! SHAMELESS THREADJACK

Hey Motorhome,
If GT is to busy for you, I got a brand spankin new 12JC rudder and pin in my hand for ya, live in HB.

Sorry GT, you gotta step it up! hheehho hmm

xoxo
p-jet

Not even a problem P-jet, hey motorhome, I would jump on this!, I think the box of stuff that had my Berkely nozzle in it with the rudder was taken a couple of months ago when they broke into my storage, I literally do not have it. If anyone spies a metallic blue and white nozzle with a polished gate (rudder blue and the nozzle white powdercoat), that is stolen!, reward offered for an address ;)

BTW, 109* in my backyard right now 8)

Hey P-jet :-* ;D

GT
Title: Re: GT's too good to throw away sale....
Post by: motorhome6 on May 17, 2009, 04:07:37 PM: ok GT , if you don't think you have it anymore ,thats probably why you haven't run across it ..not a problem, we tried.
I hope P-jet can give me the same GOOD deal you were going to give me, I remember it was a really good deal , how much was the really good deal again, its coming to me but real sloooooooooooow

yeah P-jet ,what's the deal on the rudder you have........be nice.....please

motorhome
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on May 17, 2009, 04:29:51 PM: Quote from: motorhome6 on May 17, 2009, 04:07:37 PM
ok GT , if you don't think you have it anymore ,thats probably why you haven't run across it ..not a problem, we tried.
I hope P-jet can give me the same GOOD deal you were going to give me, I remember it was a really good deal , how much was the really good deal again, its coming to me but real sloooooooooooow

yeah P-jet ,what's the deal on the rudder you have........be nice.....please

motorhome

LOL, I am not sure if there was money ever talked about, but gotta be worth $20.... :-\

I wish I could find that box of crap, there was some real treasure in there.... :sly:

BTW, my pop thinks he has some blanks for your transome holes, he will be home next weekend.
Title: Re: GT's too good to throw away sale....
Post by: motorhome6 on May 17, 2009, 09:18:16 PM: No we didn't talk about any price ;D I figured you'd go along with me and name a ridicilous price for P-jets sake, uno just being a smart ass, LOL . P-jets has a new one anyway, i'm waiting to hear a price from him. If you can hear me out there P-jets i'm interrested, don't know if I need a new one but if the price is good , what the hell. YES GT if your pop has any...those are the holes i need to cover, you can PM me in case i miss you on here

P-jets pm me..... thanks GT

man I love this web site................................ motorhome
Title: Re: GT's too good to throw away sale....
Post by: EL GUAPO on June 28, 2009, 12:35:10 PM: ;D im a happy go lucky sanger driver, i would be interested in your 14" in steering wheel.
bolt-on rudder for temperary use on long beaches boat parade this 4th. happy 4th 2 u and yours
myspace.com/elguaporusty

thanks
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on June 28, 2009, 12:54:25 PM: Quote from: EL GUAPO on June 28, 2009, 12:35:10 PM
;D im a happy go lucky sanger driver, i would be interested in your 14" in steering wheel.
bolt-on rudder for temperary use on long beaches boat parade this 4th. happy 4th 2 u and yours
myspace.com/elguaporusty

thanks

I only have an 18" and a 16" destroyer wheel (all stainless), I do have another ruber gripped steering wheel in the Shitty Kitty, but have not tried to remove it yet (been on there since 1974) but also a 16"er, no rudders, tried to find one for motorhome to no avail. I had some stuff eliminated from my posession to lighten my load (stolen) and I believe there was a box of rudders among the taken (had several of the large and small from doing Place diverter installs).

Let me know if the 16" will do you some good, would have to get it shipped in the next day or so to get it in time for the fourth. ;)

GT

ps... welcome to this wonderful world of time killers :screwy:
Title: Re: GT's too good to throw away sale....
Post by: propless on August 09, 2009, 06:50:38 PM: Bump for GT.

I went up there today to pick up my parts and this poor guy really needs to sell some more stuff ;). I could hardly tell there was a boat in his garage (so many parts).

What ever you guys need just send him a list, he probably has 3 of them in there somewhere. ;D

Oh, and Glenn, get back to work cutting up that tuna boat in the driveway before your neighbor calls the city. :D
Title: Re: GT's too good to throw away sale....
Post by: IRRebel on August 09, 2009, 06:58:21 PM: He still has the SS Minnow? I thought that thing was landfill food a long time ago, lol

Ray
Title: Re: GT's too good to throw away sale....
Post by: Chili on August 12, 2009, 06:52:03 PM: Got any Baffles.?

I made a post in the WTB section.
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on August 12, 2009, 07:14:22 PM: Quote from: Chili on August 12, 2009, 06:52:03 PM
Got any Baffles.?

I made a post in the WTB section.

Not right now. I will take a closer look though.

The Minow is much smaller and lighter BTW. :thumbup:

Thanks again Proppy, hoe it all works out well, very nice to see you again, lets do Ming ;)

GT
Title: Re: GT's too good to throw away sale....
Post by: IRRebel on August 13, 2009, 08:07:44 AM: Well since you got no place to put it, I got Skip (Lefty) involved and he's getting that engine for me. So that's at least off your plate and not in your 'rage!

Don't happen to have an AT or JG bowl laying around do ya? (Don't ask what it's for, not sure I'm even right about this one)

Ray
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on October 04, 2009, 09:12:28 PM: Bumpdiggity ;)

GT
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on October 08, 2009, 08:19:34 PM: Some pictures of stuff I don't need! ;)

[attachimg=#]

[attachimg=#]

[attachimg=#]

[attachimg=#]

[attachimg=#]

[attachimg=#]
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on October 08, 2009, 08:23:28 PM: And some more! :-\

[attachimg=#]

[attachimg=#]

[attachimg=#]

[attachimg=#]

[attachimg=#]

[attachimg=#]
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on October 08, 2009, 08:30:11 PM: I am starting to think I have a problem :screwy:

[attachimg=#]

[attachimg=#]

[attachimg=#]

Maybe more tomorrow :thumbup:
Title: Re: GT's too good to throw away sale....
Post by: bbfsouthwind on October 08, 2009, 09:05:49 PM: What style loader is that? And what kind of pump will it work on? Do you have a droop or straight snoot?
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on October 08, 2009, 09:27:43 PM: Quote from: bbfsouthwind on October 08, 2009, 09:05:49 PM
What style loader is that? And what kind of pump will it work on? Do you have a droop or straight snoot?

Not selling any droops or snoots, I gotta figure out what works on the Southwind and what dont.

As for the loader, its for Berkeley 12JC and 12JG pumps, came out of my boat when I got it...It's the straight angle one...Works OK...Not inteded for really high horsepower high speed...General ski boat type dealio.

$30 and you can give it a try. :sly:

GT
Title: Re: GT's too good to throw away sale....
Post by: HDriderTH on April 09, 2010, 02:55:56 PM: You still got the pinstriped floater bar?
Title: Re: GT's too good to throw away sale....
Post by: SuperDuty on April 09, 2010, 03:25:16 PM: What bore pistons are those? Ill be in the market for some .60 overs really soon! And still have an alt? If it looks good I might need one! Thanks.
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on April 09, 2010, 06:48:11 PM: Quote from: HDriderTH on April 09, 2010, 02:55:56 PM
You still got the pinstriped floater bar?

Yep!

Quote from: SuperDuty on April 09, 2010, 03:25:16 PM
What bore pistons are those? Ill be in the market for some .60 overs really soon! And still have an alt? If it looks good I might need one! Thanks.

I need to check, I think they are .030 overs (7 of them) and standards (the other 7)..... :sly:

GT
Title: Re: GT's too good to throw away sale....
Post by: HDriderTH on April 09, 2010, 07:32:36 PM: Quote from: GT Jets on April 09, 2010, 06:48:11 PM
Yep!

Is that for a V/T trailer, mines all bent up.
Title: Re: GT's too good to throw away sale....
Post by: sandeggo on June 02, 2010, 12:37:22 PM: glenn, got any trim parts?
Title: Re: GT's too good to throw away sale....
Post by: glastornjet73 on June 12, 2010, 09:06:05 AM: u have a 15 spline 28 cleaver?
Title: Re: GT's too good to throw away sale....
Post by: RiverLizard85 on June 27, 2010, 05:05:58 PM: Im looking for a 454/Jacuzzi drive line combo (drive line & yoke). As well as a bell housing for a 454...do you have any of these?
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on June 27, 2010, 05:41:22 PM: Quote from: RiverLizard85 on June 27, 2010, 05:05:58 PM
Im looking for a 454/Jacuzzi drive line combo (drive line & yoke). As well as a bell housing for a 454...do you have any of these?

May be able to hunt one down, but don't have one now...

Try giving Tom at JBP a call, he can probably hook you up. :thumbup:

GT
Title: Re: GT's too good to throw away sale....
Post by: GT Jets on June 27, 2010, 05:43:17 PM: Quote from: glastornjet73 on June 12, 2010, 09:06:05 AM
u have a 15 spline 28 cleaver?

I don't know how I missed this, I need to take a look, I know I have a labbed 26", but not sure on a 28", I think I went through this with proppy and did not have one...But I will check. ;)

GT