GT's too good to throw away sale....

« **Reply #25 on:** March 29, 2009, 08:26:15 PM »

Quote from: IRRebel on March 29, 2009, 08:20:13 PM

I dun wanna spend $400 on something I plan to sink for giggles, Glen, are you and I both nuts? (What am I SAYING, I almost sank about $7g's at Mead)

The trailer might come in handy, but it looks about as fugly as the boat. Maybe launch the boat, toss the trailer on top, tow 'em out to the middle of SAguaro lake, or other, THEN sink 'em both? I'll pay the fine for pictures of that,

Sounds like an SCJB event to me! Better than calling Brad up in the middle of the night in a drunken stuper playing, "I'm on a Boat"

Sinking a weedwhacker!

Ray

Yeah, but you forgot the burrito...Besides, I don't think this thing will sink, it has more foam than a mall snowman!

And believe it or not, this is where most, if not all of my drivetrain parts came from for the Carrera, I'm sticking a 330HP Small block in front of the drive that came out of this boat, as for the crazy....RIght there with you...BTW I don't see anything wrong with calling Brad in the all hours to share music

GT

« **Reply #26 on:** March 29, 2009, 09:02:56 PM »

Can I get a pix of the Campbell/Spectra style anchor light, chrome, in perfect condition, removeable type, $40 or offer...

Thanks Turbo350r

« **Reply #27 on:** March 29, 2009, 10:31:03 PM »

Quote from: turbo350r on March 29, 2009, 09:02:56 PM

Can I get a pix of the Campbell/Spectra style anchor light, chrome, in perfect condition, removeable type, $40 or offer...

Thanks Turbo350r

Get that for you tomorrow....

GT

« **Reply #28 on:** March 30, 2009, 10:37:54 AM »

Do you have any single carburetor air scoops?

« **Reply #29 on:** March 30, 2009, 07:43:14 PM »

How much for this floater bar shipped to Keokuk, IA 52632?

« **Reply #30 on:** March 30, 2009, 08:22:25 PM »

Quote from: RiverLizard85 on March 30, 2009, 10:37:54 AM

Do you have any single carburetor air scoops?

I don't think so, but I'll check.

GT

« **Reply #31 on:** March 30, 2009, 08:23:30 PM »

Quote from: SnoC653 on March 30, 2009, 07:43:14 PM

How much for this floater bar shipped to Keokuk, IA 52632?

I'll get it weighed, the shipping will cost more than the bar.

GT

« **Reply #32 on:** March 30, 2009, 11:30:06 PM »

GT,
Hey buy chance you got a marine offset mount starter for bbc? if you do how much?

« **Reply #33 on:** March 30, 2009, 11:48:31 PM »

Quote from: sandman on March 30, 2009, 11:30:06 PM

GT,
Hey buy chance you got a marine offset mount starter for bbc? if you do how much?

Assuming here...Offset being large flywheel? (168 Tooth)

Or offset meaning rear mount?

I have a rear mount and two straight patterns (153 tooth) but think I have a good marine drive housing at the barn, if I do, I'll change it out for you, it's a GM high torque (double wound stator) Marine deal, get pics this week, all fresh stuff bench tested ready to play $40, gotta figure out how to get it to you (heavy), if you go get a reman, I may be able to get the marine parts to you also (I can tell/show you how to convert it...

GT

« **Reply #34 on:** April 02, 2009, 06:16:14 PM »

Wow, you weren't kidding... That thing is FUGLY! That IMP is bigger than ours and don't know if it would fit on the trailer. Our trailer is definitely fuglier though... Wish I had a pic of it.

« **Reply #35 on:** April 02, 2009, 09:10:23 PM »

Quote from: GT Jets on March 30, 2009, 11:48:31 PM

Assuming here...Offset being large flywheel? (168 Tooth)

Or offset meaning rear mount?

I have a rear mount and two straight patterns (153 tooth) but think I have a good marine drive housing at the barn, if I do, I'll change it out for you, it's a GM high torque (double wound stator) Marine deal, get pics this week, all fresh stuff bench tested ready to play $40, gotta figure out how to get it to you (heavy), if you go get a reman, I may be able to get the marine parts to you also (I can tell/show you how to convert it...

GT

Well im interested but ya the shipping might be crazy huh? weel post some picks maybe we can figure something out

Mike

« **Reply #36 on:** April 02, 2009, 09:21:10 PM »

Quote from: Baja and Bust on April 02, 2009, 06:16:14 PM

Wow, you weren't kidding... That thing is FUGLY! That IMP is bigger than ours and don't know if it would fit on the trailer. Our trailer is definitely fuglier though... Wish I had a pic of it.

If you want the trailer lemme know, I think it measures 23' overall, but it's a roller trailer (no bunks) so would fit boats from 19' to 22' with a few simple adjusments, there are literally no welds on this trailer, totally bolted together, I am going to pressure wash it and hit it with some rust stop on Sunday, there is some surface rust that makes it uglier than it deserves....

GT

« **Reply #37 on:** April 02, 2009, 11:01:08 PM »

GT save me the berkley jet rudder ,I'll take that plus whatever else I can come up with that I might need and you might have ok thanks I know your pretty busy still

« **Reply #38 on:** April 03, 2009, 12:21:51 AM »

Quote from: motorhome6 on April 02, 2009, 11:01:08 PM

GT save me the berkley jet rudder ,I'll take that plus whatever else I can come up with that I might need and you might have ok thanks I know your pretty busy still

Sorry motorhome, it's all yours, lemme know what your in need of and I'll see what I can do, I have to work Saturday, but will possibly get some time Sunday to get my crap together....I hope $:-\$

GT

« **Reply #39 on:** April 05, 2009, 07:50:35 PM »

hey buddy :-) do you have any alternators in good shape? I have a custom built 1 wire alt but I dont know if I trust it. Also, do you have a setup that would cover the flexplate? because im using a rail kit and the plates exposed.

« **Reply #40 on:** April 05, 2009, 10:43:27 PM »

Quote from: maddogg20 on April 05, 2009, 07:50:35 PM

hey buddy :-) do you have any alternators in good shape? I have a custom built 1 wire alt but I dont know if I trust it. Also, do you have a setup that would cover the flexplate? because im using a rail kit and the plates exposed.

Maddog, I will check out this alternator tomorrow, it came off my Bahner and was running when it was pulled, but it will be checked and I will let you know, as for the bell housing I just sold one last week at the swap meet and don't have any extras.

GT

« **Reply #41 on:** April 06, 2009, 06:22:28 PM »

Did you figure out the shipping for the bar to Iowa?

« **Reply #42 on:** April 06, 2009, 09:13:46 PM »

Quote from: SnoC653 on April 06, 2009, 06:22:28 PM

Did you figure out the shipping for the bar to Iowa?

You were serious?, I'll find out in the AM, I'll post it when I find out, had meetings all day.

GT

« **Reply #43 on:** April 07, 2009, 04:51:18 AM »

I figure it is better to have the right part that fits the competitive trailer than to rig something up and have the boat wind up on the highway. Towing it back from Cali it tried to leave the trailer both forward and backwards off the trailer. Don't need it in any rush but I was serious about it.

« **Reply #44 on:** April 10, 2009, 01:28:07 PM »

GT Jets check your PM's thanks

« **Reply #45 on:** April 10, 2009, 05:17:10 PM »

Quote from: motorhome6 on April 10, 2009, 01:28:07 PM

GT Jets check your PM's thanks

Back at you

GT

« **Reply #46 on:** April 15, 2009, 11:34:26 PM »

i read about the fiber optics problem you had ,man what a mess that can be. Tell you what , I know your real busy with alot bigger sales than what I need so when your all done and get some breathing room and you see that rudder sitting in the middle of the floor by its self just remember who wants it. Summer is a few months away so I can wait ,just save it for me and send me a bill when your ready and that will work for me . thanks GT

GOOD LUCK WITH YOUR SALES

« **Reply #47 on:** April 18, 2009, 01:01:06 PM »

Gt have any thing for a sbc? also for the trailer stuff do you have any fenders?

« **Reply #48 on:** April 18, 2009, 01:38:01 PM »

Quote from: bozz89 on April 18, 2009, 01:01:06 PM

Gt have any thing for a sbc? also for the trailer stuff do you have any fenders?

What do you need for the mouse? The only fenders I have are junk single axle deals in the scrap pile...

GT

« **Reply #49 on:** April 18, 2009, 03:34:15 PM »

wut you got for it say maybe ignition system, intake, tunnle ram, manifolds for my thruhull conversion

, idk you have any thing?

thanks
-kyle