SoCal Jet Boats
Classifieds => Random Boat Parts For Sale => Topic started by: dstocker on September 12, 2012, 06:53:45 PM
-
I have a whole list of little things I need to start working on my boat. I purchased it back from my painter which I traded for work a couple of years ago. Its a 21' Bahner open bow with Berkley and BBC 454.
Upholstery is completely gone. Need new frames, skins and foam. Brade/buy seats or need reasonable shop.
Windshields are cracked, faded and busted. About 51.5" x 7.5" dark bronze or gray/black tint. A flat piece of Plexiglas would do.
Dual fuel tank selector solenoid is missing. Be nice to have some 3/8 blue rubber fuel line. Nothing fancy.
Bow rail passenger side is bent beyond repair. Supports at about 12, 25, 94 143 Other wise I can get it fabricated? Not sure.
Carburetor is too small (650 Holley), Not sure what to put on a stock 454 but my "out of the hole" is bad. Might be partially the pump.
Carpet thru out. Dark Grey or Burgundy.
Battery box lids. Yes just the lids...7.5x13 opening.
Power Radio antenna
Black bumper edge molding
Dual Battery isolator for charging.
Alternator stays charging at 14v on a brand new battery so I think the regulator is shot.
He didn't even leave me a ski rope.
Trailer Amber Marker Lights.
Trailer Rear 3 light strip
https://lh6.googleusercontent.com/-vHmLZTLil1g/UFE3f_RJTCI/AAAAAAAABcI/KTrIhquSjs0/w684-h513-p-k/IMG_20120912_173851%255B1%255D.jpg
https://lh6.googleusercontent.com/-nT5TdStv13g/UFE3uCocLCI/AAAAAAAABcQ/A3li43sVODU/w301-h226-n-k/IMG_20120912_173916%255B1%255D.jpg
https://lh5.googleusercontent.com/-IDYzQdFquTM/UEGKbySBAnI/AAAAAAAABS8/JuceaSG-ZC0/s1073/IMG_20120831_182923.jpg
Don (916) 599-6663
-
I have a whole list of little things I need to start working on my boat. I purchased it back from my painter which I traded for work a couple of years ago. Its a 21' Bahner open bow with Berkley and BBC 454.
Upholstery is completely gone. Need new frames, skins and foam. Brade/buy seats or need reasonable shop.
Windshields are cracked, faded and busted. About 51.5" x 7.5" dark bronze or gray/black tint. A flat piece of Plexiglas would do.
Dual fuel tank selector solenoid is missing. Be nice to have some 3/8 blue rubber fuel line. Nothing fancy.
Bow rail passenger side is bent beyond repair. Supports at about 12, 25, 94 143 Other wise I can get it fabricated? Not sure.
Carburetor is too small (650 Holley), Not sure what to put on a stock 454 but my "out of the hole" is bad. Might be partially the pump.
Carpet thru out. Dark Grey or Burgundy.
Battery box lids. Yes just the lids...7.5x13 opening.
Power Radio antenna
Black bumper edge molding
Dual Battery isolator for charging.
Alternator stays charging at 14v on a brand new battery so I think the regulator is shot.
He didn't even leave me a ski rope.
Trailer Amber Marker Lights.
Trailer Rear 3 light strip
https://lh6.googleusercontent.com/-vHmLZTLil1g/UFE3f_RJTCI/AAAAAAAABcI/KTrIhquSjs0/w684-h513-p-k/IMG_20120912_173851%255B1%255D.jpg
https://lh6.googleusercontent.com/-nT5TdStv13g/UFE3uCocLCI/AAAAAAAABcQ/A3li43sVODU/w301-h226-n-k/IMG_20120912_173916%255B1%255D.jpg
https://lh5.googleusercontent.com/-IDYzQdFquTM/UEGKbySBAnI/AAAAAAAABS8/JuceaSG-ZC0/s1073/IMG_20120831_182923.jpg
Don (916) 599-6663
Just so you can take one thing off the list....The battery should always be between 14 and 14.5 volts with the engine running.... ;)
Also save the old broken windshields for templates, I just made some for my Carrera Elite out of orange acrylic.... :thumbup:
Welcome to the site. 8)
-
Good to know. I thought the alternator dropped the charging down some if the battery was fully charged. Been pushing paper too long I guess... LOL Thanks.
-
Good to know. I thought the alternator dropped the charging down some if the battery was fully charged. Been pushing paper too long I guess... LOL Thanks.
The draw on the battery determines how hard the alternator works, the voltage regulator does exactly what you think it does...Looks at voltage. ;)
GT