SoCal Jet Boats
Classifieds => Random Boat Parts For Sale => Topic started by: Ralph Brunt on September 02, 2012, 10:54:37 AM
-
first up, table full of shit, all prices obo all parts are FORD unless specified different
[attachimg=1]
fiberglass scoop, 50.00 sold
alum scoop and spark arester 100.00 SOLD
dooley oil pan needs repair, cost 150.00 and dooley will fix it. 75.00
milodon oil pan crack on bottom can be fixed no problem if you can weld. 75.00 sold
trumpet ex tips. free gone
steering bezel and gear. free
bbc pro comp valve covers. (new) 75.00 sold
ford chrome valve covers 10.00 sold
oil cooler, 40.00
alt. dont know if it works 10.00 sold
loader 40.00
race nozzle 100.00 sold
rams horn rev bucket 100.00 or both for 180.00 SOLD
[attachimg=2]dooley pan
[attachimg=3]timing cover free
[attachimg=4]c bowl 50.00
[attachimg=5]ford drive shaft, doesnt need the pto, 50.00
[attachimg=6]milodon oil pan sold
-
air cleaner new. 60.00
[attachimg=1]
[attachimg=2]
4150 fuel line. 40.00
[attachimg=3]
edelbrock torker2 intake 80.00
[attachimg=4]
trw dished pistons 30 over with rods, 100.00
[attachimg=5]
rex fwd rev 40.00 SOLD
[attachimg=6]
-
grab handles 10.00 each SOLD
[attachimg=1]
morse fwd/rev 20.00
[attachimg=2]
water press reg 10.00
[attachimg=3]
cav plate foot pedal 20.00 SOLD
[attachimg=4]
dead diverter pump, dont know whats wrong with it 20.00
[attachimg=5]
swim step brackets 10.00 SOLD
[attachimg=6]
-
v drive steering post, free GONE :D
[attachimg=1]
ford crank 40.00 needs machine
[attachimg=2]
-
I'll take the grab handles...i'll cruise by later today or tomorrow to pick 'em up
-
I'll take the grab handles...i'll cruise by later today or tomorrow to pick 'em up
fiberglass scoop sale pending
-
[attachimg=1]
-
For $10 I'll take the step brackets.....Any chance you know the angle off the top of your head?
Just gotta figure out how to get them from you. :sly:
GT
-
whats the intake fit?
-
For $10 I'll take the step brackets.....Any chance you know the angle off the top of your head?
Just gotta figure out how to get them from you. :sly:
GT
.
15.00 and i will shiop
-
whats the intake fit?
460
-
[attachimg=1]snails 20 bucks sold
-
Chevy 3point bellhousing 20.0
Mad box 80.00 worked last time I used it. If it don't work for you I will refund your money SOLD puke tank 20.00 SOLD
4500 to4150 30.00[attachimg=1][attachimg=2]
-
Is the air filter coast guard approved ans what are the dimensions?
-
Is the air filter coast guard approved ans what are the dimensions?
not coast guard approved, if you still wnat the dimensions i will get them
-
Na it's cool
I have a covered eng. comp.
Don't want any issues. Thanks tho
-
Pat are you taking both handles????
-
.
15.00 and i will shiop
Done..... :thumbup:
-
Ill take the REX forward reverse.. Thanks ralph..
-
Pat are you taking both handles????
yup he got'em
-
the table full of goodies whats up with the fiber glass scoop what did fit and is it still for sale.
-
the table full of goodies whats up with the fiber glass scoop what did fit and is it still for sale.
scoop is sold, have an aluminum one left
-
I like the BBC valve covers but I don't think they are tall enough to clear roller rockers.
-
yup he got'em
damn Mary-Lou wants an oh shit handle
-
Is the steering bezel aluminum or plastic? If its aluminum I'll take it
-
I like the BBC valve covers but I don't think they are tall enough to clear roller rockers.
the lowest part of the vc to the rail is 2.5 inches
-
Is the steering bezel aluminum or plastic? If its aluminum I'll take it
its plastic
-
Hey Ralph,
I'll take the nozzle w/rams horn, cav plate pedal, and v-drive steering extension.
Ron
-
Hey Ralph
Go ahead and shoot me the measurements on the air cleaner, and is the housing billet alum, or stainless?
-
Hey Ralph
Go ahead and shoot me the measurements on the air cleaner, and is the housing billet alum, or stainless?
15x8.5x2.5
and its aluminum on the bottom
-
Ok
My boat is out in storage at the river
Soon as I can get to it and take some measurements I'll hit you up
Thanks ralph
-
Hey Ralph do you still have the aluminum scoop, and will it fit a holley double pumper?
-
Yes and yes
-
i need forward reverse lever if you still got one
-
i need forward reverse lever if you still got one
still got the Morse
-
Thanks again for the scoop Ralph, I'll post pocs when the carbon fiber is done.
-
Pm sent
Sent from my DROID BIONIC using Tapatalk 2
-
Ralph, good to see you today and thanks for the parts.
-
Dang Ralph yer on a roll today. O0
-
Dang Ralph yer on a roll today. O0
yeah not much left, making a delivery to jim brock today
-
PM sent regarding dooley pan.
-
Do you still have the Place Diverter pump I'm hoping I can get one good one out of yours and the one I have
-
PM sent regarding dooley pan.
pm sent back
Do you still have the Place Diverter pump I'm hoping I can get one good one out of yours and the one I have
yes i still have it, the motor is bad i think, solinoids may be ok.. just not sure..
-
Ralph it was good meeting you yesterday. Thanks for the scoop.
-
Ralph it was good meeting you yesterday. Thanks for the scoop.
glad you like it :thumbup:
-
Ralph, I'm still interested in the place diverter pump , Next question seeing as I'm a newbie how can I get it from you also if you still have a shifter available I will take one also
Thanks , Jeff
-
i will be going to romoland on saturday to work on a boat, then we may test at elsinore in the afternoon and can bring the pump and shifter with me. call me today and we will work it out
5622347986 ralph
-
want to pick up that rail kit while you are out?
or i can bring it over, im in nuevo.
re modleing garage and dont have room for it
chris
714-458-6020
-
want to pick up that rail kit while you are out?
or i can bring it over, im in nuevo.
re modleing garage and dont have room for it
chris
714-458-6020
plans got cancelled, going in 2 weekends
-
Ralph,
was just reading your post. new user here. Just bought a project boat and need an intake for 460 ford. The boat is a '78. do you think it would fit.
I am in North Carolina and would pay for shipping.
Here is a pic of my project.
Thanks,
Mickie
-
Ralph,
was just reading your post. new user here. Just bought a project boat and need an intake for 460 ford. The boat is a '78. do you think it would fit.
I am in North Carolina and would pay for shipping.
Here is a pic of my project.
Thanks,
Mickie
yes it would fit however, you could probably find one cheaper on craigslist so you would not have to pay shipping.. i am more than willing to sell and ship it to you... just check around firs..
ralph
-
Do you still have the dead diverter pump?
-
Shit Ralph...
I totally forgot to pay-pal you...I will hit you in the AM...
Sorry about that my man. :-[
-
Hey Ralph, do yo by chance still have that oval air cleaner?
If so I would be intrested in it......
-
Hey Ralph, do yo by chance still have that oval air cleaner?
If so I would be intrested in it......
yup still got it
-
Ralph, I will take the air cleaner. I will pm You My addy and let Me know how to get you payment.....Hal