SoCal Jet Boats

Discussion => Sand => Topic started by: bkplesh on December 09, 2008, 04:36:10 PM

Title: need help on a quad for plesh.
Post by: bkplesh on December 09, 2008, 04:36:10 PM

I've been looking for a 90 quad for my son. I've been looking at e-ton's and polaris's. Priced from 900 to 1100. I think a want to stay with a two stroke quad.  Or is they a better quad cheaper?

Title: Re: need help on a quad for plesh.
Post by: 82daytona on December 10, 2008, 06:35:59 AM

I saw a suzuki lt80 chained to a pole the other day ill go see if its there today

Title: Re: need help on a quad for plesh.
Post by: AQUAHOLIC on December 10, 2008, 07:24:38 AM

get him a blaster. they can be modded when he gets a little older so you dont have to buy another quad to keep up with his ability.

we ride almost everyday and some of the younger kids all ride blasters

Title: Re: need help on a quad for plesh.
Post by: 82daytona on December 10, 2008, 08:18:31 AM

a blaster would be a good idea

Title: Re: need help on a quad for plesh.
Post by: bkplesh on December 10, 2008, 09:13:04 AM

that might be to big for him. He's only riding a small 50 now. And he's 7, 42 to 45 lbs

Title: Re: need help on a quad for plesh.
Post by: 82daytona on December 10, 2008, 09:52:02 AM

the 80 snt there yet ill pass by again later

Title: Re: need help on a quad for plesh.
Post by: turbo350r on December 11, 2008, 08:31:13 PM

The Suzuki lt80 is a Great Quad, also LT-Z90 or even better the Honda TRX90X    The Honda will run till the end of time, will cost a little more but it will hold its value for when you are ready to upgrade.   The E-tons are cheap imitations that will not last, the sand will kill them.  Sand is hard on Blasters and they are air cooled. Not the Greatest. Over my 17 years of going to Glamis and Dumont I seen my friends Buy Blasters and Blow them up many of times. They just cant handle the pain of High Rpms that the sand brings.  Thats just my 2 cents. 

Check out this site       http://www.ctracing.com/    Talk to Allen and Tell him Shaun From East Whittier Glass sent you. Hes got great advice. Did the motor on mine and other parts.   ;D

Title: Re: need help on a quad for plesh.
Post by: beerjet on December 11, 2008, 09:57:27 PM

Baller  ;D

-beerjet-

Title: Re: need help on a quad for plesh.
Post by: SkyHarborCowboy on December 11, 2008, 10:58:26 PM

Whatever you do, DO NOT buy a cheap Chinese built POS.  Buy from a name brand company!

Joe

Title: Re: need help on a quad for plesh.
Post by: bkplesh on December 12, 2008, 08:59:51 AM

looking at two polaris's, a 06 for 1250 and a 05 for 1000

Title: Re: need help on a quad for plesh.
Post by: beerjet on December 12, 2008, 11:30:45 AM

Ride red .  8)

-beerjet-

Title: Re: need help on a quad for plesh.
Post by: JWBOYER21 on December 14, 2008, 07:30:39 PM

ya the chinese stuff is shit. there only good if you're buying a 50 cuz they're cheap and when you break it you just buy a new one. i would go 4 stroke, just because thats where this revolution is going. i know all you 2 stroke die hards might get offended, as i love the smell and powerband of a 2 stroke, but all technology is going into the 4strokes.

not to mention, he is 7, and it will be alot easier for him to learn how to shift a 4 stroke rather than looping a 2stroke when he dumps the clutch and never wants to ride again.

Title: Re: need help on a quad for plesh.
Post by: bkplesh on December 15, 2008, 07:37:15 PM

well, it looks like plesh isn't getting a quad now. We need a new Gas Furnaces. :banghead:

Title: Re: need help on a quad for plesh.
Post by: JWBOYER21 on December 16, 2008, 08:20:58 AM

YA THAT SUCKS  :banghead: