SoCal Jet Boats
Discussion => Sand => Topic started by: Willow Wog on November 19, 2009, 07:35:09 PM
-
But im gunna ask anyways.... So I just got done putting my new (to me) sandcar all together. I finished up all the wiring tonight and went for the fireup with no luck, checked spark and nothing. this motor ran bitchin in the old car its a heads up performance built 2332. anyways I checked all the wiring and found that I connected the ignition wire to the wrong side of the coil. I swapped it and still no go so my question is did I fry the coil or the pertronix?? :banghead: :banghead: thanks guys in advance im running outta time.
-
Check the pertronix module inside the dizzy. look for burn marks on the inside. If it looks like this, you cooked it.
-
moved to the sand section ;)
-
You probably cooked the pertronix module, they're picky little pricks.
-
I ended up changing both. I put a new module and still no fire so I replaced the coil and put the old module in and still no go so I guess I fried both. its good to go now. thanks guys.