SoCal Jet Boats
Misc. => Suggestions / Support => Topic started by: JBmotorsports on May 10, 2015, 10:08:04 AM
-
I have a Gen 4 BBC . I changed cam , springs , intake , carb ! Runs great , but soon as I use my up and down switch it makes the motor intermittently miss fire ???? Only thing I did was pull out the distributor ? No wires had to be really , relocated ? I checked ALL grounds ??? Never did this till now ? The intake is the Airgap Performer Chrome factory finish ! Need Help ???
Sent from my iPhone using SoCal Jet Boats
-
Oops !! Up and down for Diverter ! 😛
Sent from my iPhone using SoCal Jet Boats
-
I have a Gen 4 BBC . I changed cam , springs , intake , carb ! Runs great , but soon as I use my up and down switch it makes the motor intermittently miss fire ???? Only thing I did was pull out the distributor ? No wires had to be really , relocated ? I checked ALL grounds ??? Never did this till now ? The intake is the Airgap Performer Chrome factory finish ! Need Help ???
Sent from my iPhone using SoCal Jet Boats
It sounds like you pulled the power for the diverter off the same circuit for the ignition switch.
This could come from an isolated source completely separate from any vital power users.
There could also be a loose connection or a bad ground.
I hate hunting that kind of crap down. Good luck to you.
GT
-
I will keep looking ! And trace the power source for the switch ! Thanx much !
Sent from my iPhone using SoCal Jet Boats
-
Also make sure the distributor has a good ground. Being as you had it out you may have lost the bond through the hold down.
-
Good call ! Will check that too . Thanks !
Sent from my iPhone using SoCal Jet Boats