SoCal Jet Boats

Discussion => The No Wake Zone => Topic started by: AA/Paul on August 25, 2008, 08:36:48 AM

Title: AA/Pauls Boat Bling
Post by: AA/Paul on August 25, 2008, 08:36:48 AM

Finally got some pics. 8)

I had to make the spacers because the Offy intake will only let ya run Carters, or Holley vaccum secondarys in line. These are 650 DP's that run on E-85. So I made the adpter to turn then sideways and incorperated the fuel log into it. I also had to make the Hiem joint holders for the linkage to space them out for fuel line clearance.

The forward/reverse thingie has a piston from a DFX turbo Cosworth . I made 2 of these. One for the boat and 1 for the truck that has a Judd 10 cyl. F1 piston on it.

You can see the "full flow" fitting on the oil return line from the head.

"The  Leper " is looking up.

Title: Re: AA/Pauls Boat Bling
Post by: AA/Paul on August 25, 2008, 08:37:23 AM

 ;D

Title: Re: AA/Pauls Boat Bling
Post by: AA/Paul on August 25, 2008, 08:38:00 AM

 ::)

Title: Re: AA/Pauls Boat Bling
Post by: AA/Paul on August 25, 2008, 08:38:35 AM

 ;)

Title: Re: AA/Pauls Boat Bling
Post by: AA/Paul on August 25, 2008, 08:39:20 AM

 ;D

Title: Re: AA/Pauls Boat Bling
Post by: AA/Paul on August 25, 2008, 08:39:54 AM

 ;)

Title: Re: AA/Pauls Boat Bling
Post by: TJS Nordic on August 25, 2008, 08:43:11 AM

NICE... ;D

Title: Re: AA/Pauls Boat Bling
Post by: FORKEDUP on August 25, 2008, 08:50:14 AM

very nice work, i wish i had 1/2 your skills at this stuff ;D