SoCal Jet Boats

Discussion => The No Wake Zone => Topic started by: LBsuperjet on May 15, 2009, 03:33:56 PM

Title: Anyone have one of these volvo motors lying around?
Post by: LBsuperjet on May 15, 2009, 03:33:56 PM: My friend is looking for either one of these marine motors...i believe they were part of the penta packages...let me know if you know of one lying around.

Aq151 = aka 250
-2.49l, or 151ci engine code that i need
-86MM stroke AQ151C or AQ151D
-Forged crankshaft
-8v 1000531 head
-Dual Carb
-"V" cam
-CR 9.7:1. comp press 142-170psi
-Cast V pistons
-All Square Tooth T-Belt
-146hp
-551.2 lbs
-max speed 5500 rpm

Aq171/ aka 251a(dohc)
-2.49L, 151.9ci engine code
-86MM stroke AQ171C or AQ171D
-16V Head
-Dual Carb
-"PZ" cam
-CR 9.7:1
-Cast V pistons
- Forged Crankshaft
-All Round Tooth T-Belt
-167hp
-637.15lbs

-Reid
Title: Re: Anyone have one of these volvo motors lying around?
Post by: 76NORDIC on May 15, 2009, 07:18:45 PM: Reid, you is talkin some foreign language there bud ;D ;D
Title: Re: Anyone have one of these volvo motors lying around?
Post by: GT Jets on May 15, 2009, 08:14:03 PM: I may have a hookup for ya, gotta call him before I give out his # ;)

He has an older boat with an AQ151 with a fresh valve job and rebuilt carbs (Solex) and the boat is el trasho'...(Trailer wreck)

GT
Title: Re: Anyone have one of these volvo motors lying around?
Post by: IRRebel on May 15, 2009, 09:07:08 PM: 2.49L? You hot rodding a Honda or a Kia Reid? ;D

Ray
Title: Re: Anyone have one of these volvo motors lying around?
Post by: GT Jets on May 15, 2009, 09:43:51 PM: Here's a tri carbed deal..

http://sfbay.craigslist.org/nby/boa/1164208891.html

And another,

http://sfbay.craigslist.org/sby/boa/1168205235.html
Title: Re: Anyone have one of these volvo motors lying around?
Post by: LBsuperjet on May 15, 2009, 11:49:46 PM: hey guys! thanx for the contacts! its SWEDISH language i think LAWLZ!...my friend wants to do a motor swap in his '87 760 volvo, and i guess these are the saught after motors...short block or long block is all he needs!...let me know! he has cash in hand i believe...thanx alot.

Reid
Title: Re: Anyone have one of these volvo motors lying around?
Post by: GT Jets on May 16, 2009, 01:03:05 PM: Quote from: LBsuperjet on May 15, 2009, 11:49:46 PM
hey guys! thanx for the contacts! its SWEDISH language i think LAWLZ!...my friend wants to do a motor swap in his '87 760 volvo, and i guess these are the saught after motors...short block or long block is all he needs!...let me know! he has cash in hand i believe...thanx alot.

Reid

A 350 chevy will bolt up to that badboy, it is literally just a gear ratio swap >:D

Shallow running has some stuff for a 4.3L V6 also...

You need to try and find a 5.7 engine from a 280 Volvo Penta, a little secret, it's an LT1, steel crank, pink rods, good heads, they're an honest 300HP SBC... :sly:

GT
Title: Re: Anyone have one of these volvo motors lying around?
Post by: GT Jets on May 16, 2009, 03:44:19 PM: http://sfbay.craigslist.org/nby/boa/1167909952.html :sly:

GT