SoCal Jet Boats

Discussion => The No Wake Zone => Topic started by: rush1 on January 16, 2015, 11:01:07 AM

Title: Berkeley clean out o ring
Post by: rush1 on January 16, 2015, 11:01:07 AM

Hey does anybody have a good source for the oring on the clean out other than the typical places,  I mean like grainger or something similar also what size are they exactly?

Title: Re: Berkeley clean out o ring
Post by: MPKardell on January 17, 2015, 06:54:23 AM

Go to the McMaster-Carr website.  They (and others) list the standard O-ring sizes that are available.  Measure your groove to find a match.

Title: Re: Berkeley clean out o ring
Post by: rush1 on January 17, 2015, 07:32:17 AM

Ahh forgot about McMaster thanks

Title: Re: Berkeley clean out o ring
Post by: Just Electric on January 17, 2015, 11:04:31 PM

The grove size they may carry butt I'm notcsurevif they carry the right diameter Oring


Sent from my iPhone using SoCal Jet Boats

Title: Re: Berkeley clean out o ring
Post by: rush1 on January 18, 2015, 08:29:55 PM

What is the correct diameter?

Title: Re: Berkeley clean out o ring
Post by: MPKardell on January 19, 2015, 03:02:48 PM

I measured 4.5" OD x 3/16" thick on an old Berkeley cover that I have laying around.  That makes it a -346 O-ring.  25/$8.39 at McMaster-Carr (Buna-N).  Several lifetime's supply......

Title: Re: Berkeley clean out o ring
Post by: rush1 on January 19, 2015, 03:59:58 PM

Thanks appreciate it.