SoCal Jet Boats
Discussion => The No Wake Zone => Topic started by: havasudre on March 13, 2008, 07:47:31 PM
-
what should i do before i put it on the water
the motor was rebuilt six months ago if that helps at all
-
change the oil. Take the distributor off and spin the gear to start some oil flowing before starting it. Drain your old gas and put new gas in.
-
change the oil. Take the distributor off and spin the gear to start some oil flowing before starting it. Drain your old gas and put new gas in.
4 mounths is not that long you'll be all right
-
If you run high compression you should change the gas. Be a bad thing if you got detonation from old low octane gas. If you run 9 or 9.5:1 I don't think there would be an issue if it was filled with 91 octane gas 4 months ago.
-
Better to be safe than sorry...
-
well i emptied both tanks ill posting pics and vids from havasu on monday as long as the boat runs
i have replaced everthing carb alt. starter i even got a new hei dist. so i think im ready this year once and for all