SoCal Jet Boats

Discussion => The No Wake Zone => Topic started by: 88CARRERA on February 26, 2010, 03:51:18 PM

Title: bolt size
Post by: 88CARRERA on February 26, 2010, 03:51:18 PM

alright. how do i find out what size all the bolts i need for my motor are, bbc. ie: intake, heads, timing, bell housing, crank pulley, cam etc

Title: Re: bolt size
Post by: crewchief22 on February 26, 2010, 06:46:22 PM

Are you looking for just a few bolts or a whole kit?

I bought a complete kit from Totally Stainless www.totallystainless.com

When you call in, if you have something special they will adjust the kit for your needs.  :thumbup:

Title: Re: bolt size
Post by: Luckie Stiff on February 26, 2010, 08:06:14 PM

ARP stainless kit from Summit:

http://www.summitracing.com/parts/ARP-535-9501 (http://www.summitracing.com/parts/ARP-535-9501)

Title: Re: bolt size
Post by: crewchief22 on February 27, 2010, 06:44:21 AM

The only problem with a prepackaged kit is you'll have to look for bolts to replace the factory water pump bolts (too long) and any others that are not OE automotive lenghts.

When I ordered my kit, I told the guy that it was for a jet boat and we adjusted what I needed (water pump plates, fuel pump block off, 2 longer intake bolts for the ski tow...).

Execellent service  :thumbup: