SoCal Jet Boats
Discussion => The No Wake Zone => Topic started by: nathan72 on September 11, 2008, 09:29:54 PM
-
we are going out tomorrow and have a beer or 2 on the little island! its in merced by the u c.
-
have fun and take pics for us
-
had i good time
-
im slow at this on the way back in my header valve got something in it and had a lot of water in the header and bent a exhaust valve. i will have it back together by next friday
-
nice pic
-
Bent an Exaust valve from water ??
-
Bent an Exaust valve from water ??
If water got in the cylinder, could have "tuliped" a valve, I think the bent part may be a few inches lower in the engine (IMO) :o
If the valve was hot enough, could have cracked it....
Some how I think we will find out.
GT
-
i just got it back together i had 2 bent valves.i have no control of the amount of water. its on or off i am putting a ball valve on i hope it works.
-
i pulled a piece of wood and a rock out of the header valve is there something i can put in there to filter all that shit! another pic
-
the staben cabin!