SoCal Jet Boats
Discussion => The No Wake Zone => Topic started by: 77Howard on January 22, 2016, 05:34:17 PM
-
Hi Guys,
New member and first time post. I am picking up a new family boat tomorrow (1977 Howard) and had a few questions. The boat is coming from an original owner and is in fairly good condition. However there are a few things that need to be done and I need some help.
1. Needs new gas tanks put in it. The original fiberglass tanks are coming apart from the inside. They cosmetically look good from the outside but not so good on the inside.
2. Needs new steering cable.
3. Ulpolstry needs to be redone.
Any advise on where to purchase fuel tanks (with mounting brackets), cables, and a good shop to take the ulpolstry to would be great.
Thanks.
-
Martinez Marine for interior if your close to Corona, ca
Sent from my iPhone using SoCal Jet Boats
-
eddie marine is good for the cables. They are in Rancho, also there is cpperformance.com
tanks, youd have to measure what you have then look for somehting that will fit
martinez is really good for interior but not cheap.
-
I think I seen some fuel tanks in the classified section on this site for sale.