Don't run the engine

Hang them in the garage and forget about ever putting them on the boat.


Well it helps if the engine is tuned right, not to lean, get the water supply to the headers dead nuts on and try to keep them clean of grease, oil, and the oils from your hand when working on it. The second they get hot and any of the above or on them it will burn on and most important don't touch them when there hot.

I've been told to spray with WD40 before storage and clean with windex before use.

that's what Bassetts website says I think

Sent from my LG-VS700 using SoCalJetBoats mobile app

Whatever you do, if you break a rocker arm, don't idle back to the lagoon, in fact try and run at idle as little as possible since you can't run water through the headers at idle...le'sigh

-signed a guy who burned his new headers via idling