Good morning looking to see if anyone has removed the fuel tank from one of these.
 I am just getting ready to put it back in the water and decided to pressure test the fuel tank to make sure it didn't leak.
 What I did was blocked off the fuel fill and vent at the tank. I set up a tee fitting to screw into the suction side that had a Schrader valve and gauge so that I could read the pressure and it would hold in the tank.
I can't seem to get over 1psi. I do hear air leaking but with soapy solution can't find it. My guess could be leaking from the sending unit or the tank itself.
Anyone be into one of these yet?