SoCal Jet Boats

Discussion => The No Wake Zone => Topic started by: beerjet on February 11, 2009, 09:53:37 PM

Title: I need some custom .......
Post by: beerjet on February 11, 2009, 09:53:37 PM
Shit done to my truck.
Appearantly I am not allowed to own a vehical without someone wanting to break into it.
My new silverado was no exception.
They never got in but managed to jam the door key cylinder in and now the latch mechanism jams up and I cant get out of my truck with out workin the lever and the fukin lock at the same time.  :banghead:  :mad:
My solution is to shave the door handles off the fukin truck !
That'll teach them fukers!
Who does that kind of shit around here (IE) without taking an arm and a leg.

-beerjet-
Title: Re: I need some custom .......
Post by: flytime on February 11, 2009, 09:57:19 PM
Find somebody that does street rod work. Smooth out the doors and getting remote door latches is going to be the hot ticket. After that get some 22's and bag the fuker. ;D
Title: Re: I need some custom .......
Post by: nathan72 on February 11, 2009, 10:09:11 PM
that sucks i would do it for you if you lived closer! but i have a 27 1/4" 4 link for it wen you bag it ;D
Title: Re: I need some custom .......
Post by: koyota93 on February 11, 2009, 11:08:13 PM
There's a place in Garden Grove that does them pretty clean. Not sure how much he charges. Saw a car that came out of the shop a few years ago and the work was top notch. Not one of those bondo wave jobs. I wanna say the place is called Wicked Rods, its not Wicked Creations which is also in GG.
Title: Re: I need some custom .......
Post by: 78centurian on February 11, 2009, 11:26:57 PM
I WORK AT A SHOP IN RANCHO....WE CAN DEFFINETLY HANDEL IT NO PROBLEM
Title: Re: I need some custom .......
Post by: propless on February 11, 2009, 11:41:36 PM
beerjet,  If this truck is your daily driver just fix the door and call it done.  Remote door latches can be a pain in the ### !!! 

 Lets think about this...
  Scenario #1.... You take the family to the lake.  Back the boat down the ramp. Everyone gets out.  You walk back to unhook the boat.  As the door closes behind you, you think wheres the remote (its on the keyring, in the running truck, that you cant get into).  :banghead: :banghead: :banghead:
 Sure, you can add a "secret button" to pop the door open, and hope the thieves don't find it.  ::)

 Scenario #2.... Your getting ready to go to work. You walk out to the truck, push the little button on your remote, and nothing happens  :-\.  Lets try this again, push the little button a little harder, still nothing.  Well maybe the remote is broken.  Good thing you were smart and had that "secret button" installed  ;D.  You push the "secret button" and nothing happens  :-\.  Due to an act of God, the trucks battery is dead, and you cant get in to open the hood. Or maybe the solenoid that pops the door is bad, or the relay, or the alarm brain, or a fuse, etc, etc, etc. Doesn't matter because there all inside the truck,   and your not.   :banghead: :banghead: :banghead:
Title: Re: I need some custom .......
Post by: povertyjet on February 12, 2009, 04:01:43 AM
x2 with prop
Title: Re: I need some custom .......
Post by: Brad @ SCJB on February 12, 2009, 05:42:15 AM
call chromey....he knows people who do that kinda stuff
Title: Re: I need some custom .......
Post by: 2savage4you on February 12, 2009, 05:55:28 AM
Yeah shave the door handles....

That way all they have to do is just break the window ???

No matter what you do if they want in.................. There gonna get in!!


X3 with proppy
Title: Re: I need some custom .......
Post by: Nordie on February 12, 2009, 06:09:35 AM
i see all points here, but the truth is no matter what if they want your shit bad enough they will get in...the lock cylinder causes the least damage to your truck, but it always damages you the owner the most...maybe a 300 dollar car alarm is in order...
Title: Re: I need some custom .......
Post by: JWBOYER21 on February 12, 2009, 07:47:44 AM
www.theshop310.com

call, ask for christian, he knows everybody, everywhere in the business. let him know boyer told you to call him.  ;D

sorry to hear about the truck. u could just put a big ass dog in it!
Title: Re: I need some custom .......
Post by: BOOST on February 12, 2009, 07:54:43 AM
i see all points here, but the truth is no matter what if they want your shit bad enough they will get in...the lock cylinder causes the least damage to your truck, but it always damages you the owner the most...maybe a 300 dollar car alarm is in order...
I'm with Josh on this one a good alarm.
Title: Re: I need some custom .......
Post by: beerjet on February 12, 2009, 03:16:13 PM
I thought about the good alarm but I just dont to hear the fukin thing go off when dew builds up on the hood.

Turbo350r had a bitchin truck a few years back that was an absolute pu$$y magnet.
Not a handle anywhere and I remember it being pretty reliable.

Yes, I know, if they want in , they'll get in.
The truck has lo-jack, gap insurance, and some other fukin insurance from GM, plus my insurance, so the possability of making money on the truck if it's ever stolen is pretty good  ;D

None of my vehicals have ever had a broken window cuz I don tleave anything in sight which leads me to believe it's probably just rookie punk kids who have no thieving experience , hence the rammed in door lock.
Besides a secret button sounds kind of cool  :sly:

-beerjet-
Title: Re: I need some custom .......
Post by: HDriderTH on February 12, 2009, 04:11:02 PM
I think you got lucky, usualy they go right under the door handle. Fucs the whole door up and they get in. I hear the silverados are high on the most stolen list. I park the Vette and the truck in front of the boat and the jeep sideways behind them and my room is right above the the driveway.
Title: Re: I need some custom .......
Post by: CHROMEY on February 12, 2009, 04:13:54 PM
MY 2 CENSE...LOL

i saw plenty of them at the chevy dealer  (when i used to work  ha ha )  to get into the newer body styles..you ram something hard into the lock cyl and basically snap off the c-clip mount in the handle, pushing the lock cyl into the door, and then you can use something to lift the prop rod  and unlock the door get in and party....i does take a lot of banging on the column to get access on the newer chevys to start them..unlike the older ones.........
so from what i remember on your ride is you only have one lock cyl in the drivers door .....unfortunatly you have to replace the handle, most likely the lock cyl and have it recoded to match your shit......survey says about 350.oo or so you should be able to buy the handle pre-painted to bolt in..most likely under your deductable too????....if your going to fix it take it to the "dealer" bodyshop and see if they sell a plate called "jimmy jammers" its a plate that bolts behind the handle and lock cyl to stiffen it up.....call me if you have questions bitch....
Title: Re: I need some custom .......
Post by: HDriderTH on February 12, 2009, 04:21:04 PM
well THERES your problem, no "jimmy jammers"
Title: Re: I need some custom .......
Post by: CHROMEY on February 12, 2009, 04:30:12 PM
well in his part of town.....juan jammers or shawnequa jammers... ;D
Title: Re: I need some custom .......
Post by: OC2Vegas on February 13, 2009, 11:18:55 AM
They have alarms now that will send you a text message or call your cell when the alarm goes off!
Title: Re: I need some custom .......
Post by: GlassCutter on February 13, 2009, 11:30:42 AM
Have you considered a fence across the front yard and a pit bull behind it?  My buddy raises some of the meanest bitches around.
Title: Re: I need some custom .......
Post by: JWBOYER21 on February 13, 2009, 11:38:10 AM
They have alarms now that will send you a text message or call your cell when the alarm goes off!
i've heard about those. you probably have to pay a monthly airtime fee though ??? still might be worth it if u have a nice vehicle and u have a huge loan and don't have gap ins.

  My buddy raises some of the meanest bitches around.
my wife is probabbly friends with them  :D :D :D jk!
Title: Re: I need some custom .......
Post by: CHROMEY on March 09, 2009, 04:17:51 PM
im sure omar is handy....this could be an easy fix...problem solved and cheap!! 8)

(https://www.socaljetboats.com/cpg/albums/userpics/10582/normal_for_omar.jpg)

just add paddlelock

Title: Re: I need some custom .......
Post by: OC2Vegas on March 09, 2009, 04:25:33 PM
I found you an alarm Omar..

Looks like they run about $275

http://www.viper.com/ShopViperProducts/ItemDetail.aspx?ItemCode=5702V (http://www.viper.com/ShopViperProducts/ItemDetail.aspx?ItemCode=5702V)
Title: Re: I need some custom .......
Post by: GT Jets on March 09, 2009, 04:46:10 PM
I found you an alarm Omar..

Looks like they run about $275

http://www.viper.com/ShopViperProducts/ItemDetail.aspx?ItemCode=5702V (http://www.viper.com/ShopViperProducts/ItemDetail.aspx?ItemCode=5702V)


I have one of these on my work truck, the shizzle BTW. O0

GT
Title: Re: I need some custom .......
Post by: beerjet on March 09, 2009, 05:10:16 PM
I found you an alarm Omar..

Looks like they run about $275

http://www.viper.com/ShopViperProducts/ItemDetail.aspx?ItemCode=5702V (http://www.viper.com/ShopViperProducts/ItemDetail.aspx?ItemCode=5702V)
It says $650 :-\

-beerjet-
Title: Re: I need some custom .......
Post by: OC2Vegas on March 09, 2009, 05:20:12 PM
It says $650 :-\

-beerjet-

Look at the prices here:

http://www.google.com/search?q=Viper+5901+Responder+LC3&rls=com.microsoft:*&ie=UTF-8&oe=UTF-8&startIndex=&startPage=1 (http://www.google.com/search?q=Viper+5901+Responder+LC3&rls=com.microsoft:*&ie=UTF-8&oe=UTF-8&startIndex=&startPage=1)
Title: Re: I need some custom .......
Post by: beerjet on March 09, 2009, 05:22:50 PM
Look at the prices here:

http://www.google.com/search?q=Viper+5901+Responder+LC3&rls=com.microsoft:*&ie=UTF-8&oe=UTF-8&startIndex=&startPage=1 (http://www.google.com/search?q=Viper+5901+Responder+LC3&rls=com.microsoft:*&ie=UTF-8&oe=UTF-8&startIndex=&startPage=1)
I might have to pick 2 up as soon as shit gets going again .

-beerjet-
Title: Re: I need some custom .......
Post by: OC2Vegas on March 09, 2009, 05:24:43 PM
Its all the add on modules as with any alarm that will jack the price up, Door lock module, windows, etc
Title: Re: I need some custom .......
Post by: IRRebel on March 09, 2009, 06:46:41 PM
Here's an Idea Omar. And just an idea. Did this years ago in High school on a Nova I had that everyone wanted to sit on at hang-ins to pick up chicks.

Wire the output of a HEI coil to the chassis. The tires will insulate it and keep it charged, and mount a rubber isolated switch under a fender or somewhere only you know where it is to unload it harmlessly to chassis ground.  It could even be wired to the door locks on modern cars as long as you use a rubber insulated key, I suppose.

Anyway, anyone touched the car, on the ground, WAMMO, 60+ K-volts.

It's a motivator, that's for sure! It did work. Now to challenge my lil brain on exactly how I wired it. Back then I was into electronics techie stuff.............The old Radio Shack days,  :screwy:

Ray
Title: Re: I need some custom .......
Post by: jet boat performance on March 09, 2009, 08:47:01 PM
Get a "Street sweeper" Bro Phukin theives I hate them !!
Title: Re: I need some custom .......
Post by: Luckie Stiff on March 09, 2009, 08:49:08 PM
Get a "Street sweeper" Bro Phukin theives I hate them !!


 :sly:
SMFPacks CMS 1.0.3 © 2026