SoCal Jet Boats
Discussion => The No Wake Zone => Topic started by: steves86ta on August 24, 2014, 07:03:29 PM
-
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv643%2Fsteves86ta%2FMobile%2520Uploads%2FIMG_20140824_183726_207_zpsr2yggd2b.jpg&hash=59e6064fecf8dc15a2bb2696ee602323885df1c9) (http://s.photobucket.com/user/steves86ta/media/Mobile%20Uploads/IMG_20140824_183726_207_zpsr2yggd2b.jpg.html)
Sent from my DROID RAZR HD using SoCal Jet Boats mobile app
-
Bet that came out of a ford!
Just as bad as this...
Sent from my iPhone using SoCalJetBoats
-
Yikes!!!👎👎
Sent from my iPhone using SoCal Jet Boats
-
Aren't some supposed to curve a little to the left? ;D
-
SBC!!!! looking into the root cause. Looks like the cams walking too :-(
Sent from my DROID RAZR HD using SoCal Jet Boats mobile app
-
see thats why i never take mine out of the garage. bad stuff happens.
-
SBC!!!! looking into the root cause. Looks like the cams walking too :-(
Sent from my DROID RAZR HD using SoCal Jet Boats mobile app
Potential causes...
Major valve float, piston meet valve head...
Valve guide tolerances too tight...
Hokey valve train geometry.
Coil bind.
Rotator contact onto valve guide.
Major guide plate misalignment..
Major hydraulic... Though that would be also apparent in the "other" rods as well... :screwy:
Good luck.
GT
-
see thats why i never take mine out of the garage. bad stuff happens.
Classic. :D
-
Looks like valvetrain geometry was to blame.
FYI when drilling heads for studs, dont do it after you've consumed more beer than you are supposed to
-
done some work lately, and some parts ordering O0
tips drilled and mounted for through transom :-)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv643%2Fsteves86ta%2FMobile%2520Uploads%2FIMG_20140903_194803_908_zps9iamicc7.jpg&hash=84956c6687e43cbc2a5c31783e1839d10a3fb4f0) (http://smg.photobucket.com/user/steves86ta/media/Mobile%20Uploads/IMG_20140903_194803_908_zps9iamicc7.jpg.html)
cleaned and painted block, also checked out the new 7+ quart pan
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv643%2Fsteves86ta%2FMobile%2520Uploads%2FIMG_20140904_203829_796_zpsvgz5pmro.jpg&hash=0699fea386a540e8d3f8f7919a6943e9dffe25cf) (http://smg.photobucket.com/user/steves86ta/media/Mobile%20Uploads/IMG_20140904_203829_796_zpsvgz5pmro.jpg.html)
Christmas should be here tomorrow and most of next week as parts start to trickle in
-
Why are those tips so far apart?
-
Why are those tips so far apart?
As they get older, the tips point further downward and apart...looks natural to me.
-beerjet-
-
As they get older, the tips point further downward and apart...looks natural to me.
-beerjet-
Hahaha... Except in SoCal, they seem to get higher and tighter, which is why I asked... ;)
GT
-
Hahaha... Except in SoCal, they seem to get higher and tighter, which is why I asked... ;)
GT
Good ....... point!
(Pun intended)
-beerjet-
-
Gt. Its the only spot that would work without moving the swim steps. Or drilling through the double thick part of the transom
Sent from my DROID RAZR HD using SoCal Jet Boats mobile app
-
You guys are killing me
Sent from my DROID RAZR HD using SoCal Jet Boats mobile app
-
Christmas came early
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv643%2Fsteves86ta%2FMobile%2520Uploads%2FIMG_20140905_223553_zpsm6zts0sk.jpg&hash=77063ddb903b589bb5f68e4194c3fa6c749cf835) (http://s.photobucket.com/user/steves86ta/media/Mobile%20Uploads/IMG_20140905_223553_zpsm6zts0sk.jpg.html)
Cylinders are honed, cam bearings are in. Rest of lower end goes together tomorrow
Sent from my DROID RAZR HD using SoCal Jet Boats mobile app
-
see thats why i never take mine out of the garage. bad stuff happens.
Good stuff! 😂👍
Frazier
Sent from my iPhone using SoCal Jet Boats
-
Did you send your heads to BMS?
-
Did you send your heads to BMS?
No Greg. Ended up ordering a brand new set from promaxx
Thank you for the referral though. He seemed straight up and prices were good.
Just decided to go aftermarket in the end. Hopefully less headaches
Sent from my DROID RAZR HD using SoCal Jet Boats mobile app
-
Close.
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv643%2Fsteves86ta%2FMobile%2520Uploads%2FIMG_20140907_120959_495_zpsniy24xjo.jpg&hash=1f9632fc7570a3a82d4b1e82522ffd5b5cb93ce2) (http://s.photobucket.com/user/steves86ta/media/Mobile%20Uploads/IMG_20140907_120959_495_zpsniy24xjo.jpg.html)
Sent from my DROID RAZR HD using SoCal Jet Boats mobile app
-
Not bad.
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv643%2Fsteves86ta%2FMobile%2520Uploads%2FIMG_20140907_121009_716_zpsb6je8yyi.jpg&hash=ee4e8a9bb860f9c6cfd4b399c79dd66403131dd3) (http://s.photobucket.com/user/steves86ta/media/Mobile%20Uploads/IMG_20140907_121009_716_zpsb6je8yyi.jpg.html)
Sent from my DROID RAZR HD using SoCal Jet Boats mobile app