SoCal Jet Boats
Discussion => The No Wake Zone => Topic started by: Legal Chemistry on July 22, 2009, 07:21:59 PM
-
I'd like to put it out there if anyone on the boards does this (or knows someone) that does it for a living. I figure I'd get treated better here than looking in the yellow pages. I have an old house built in the 30's that has heat and air from the 30's (or lack thereof). Plenty of room in the attic or below the house for ducting. I have a newborn and we'll be spending more time at home.
thanks
-j
-
Where in San Diego? I have a friend that has ownerd an HVAC company longer then I can remember in South OC (Laguna Niguel). I could give him a call and see how far he goes down to. Probably the most upstanding, straight forward guy I know.
-
Upstanding? Straight-forward? A/C-GUY????? :screwy:
That ain't been invented yet Jeremy! Lol!
Ray
-
Upstanding? Straight-forward? A/C-GUY????? :screwy:
That ain't been invented yet Jeremy! Lol!
Ray
Thats what I would of thought too. :thumbup:
-
I can design something for you with a little info. but not very close to San Diego... ;)
-
What are you doing on the computer Glenn? I got an engine for you to get! LMAO
Ray
-
What are you doing on the computer Glenn? I got an engine for you to get! LMAO
Ray
Que! ???
GT
-
Oh yeah, I guess I gotta tell you about it first huh! Thought I did. jack over, PM sending, lol
Ray
-
One of my neighbors at the river owns a A/C business in San Diego , when I go this weekend I'll get his number for you.
-
I used to use a guy on Greenfield in El Cajon all the time, can't remember the shop name. It's right off the corner of Mollison and Greenfield, right next to Mark Motors and Wally's Muffler
-
I'm just east of downtown.
Not to be-little anyone that's in the biz, but is this difficult to do? Big fan, condenser, some tubes & chit the attic? :D. Yeah, knowing it would be done in 2 years and still not work right.
Any recommendations for equipment/size? It doesn't get too hot or cold here, but enough to warrant looking into this. Rough estimates on cost?
-
I'm just east of downtown.
Not to be-little anyone that's in the biz, but is this difficult to do? Big fan, condenser, some tubes & chit the attic? :D. Yeah, knowing it would be done in 2 years and still not work right.
Any recommendations for equipment/size? It doesn't get too hot or cold here, but enough to warrant looking into this. Rough estimates on cost?
Let me know the square feet, ceiling height, window type, best guess at the insulation factor (R12 roof, R24 walls etc.) how many rooms, electrical service amps, (probably 100 AMP) and I will get you some options. ;)
GT
-
Thanks GT ;D ;D
1500 sq ft, 3 bed/2 bath, no insulation (should get some blown in), 9' ceilings, single paned windows, my pops will do the power (retired electrical contractor). The house is an old historic house, wood & plaster, real 2x4's (you know the ones that actually are 2" x 4" ;D). Just east of downtown - so it's not as extreme as El Cajon.
-
Thanks GT ;D ;D
1500 sq ft, 3 bed/2 bath, no insulation (should get some blown in), 9' ceilings, single paned windows, my pops will do the power (retired electrical contractor). The house is an old historic house, wood & plaster, real 2x4's (you know the ones that actually are 2" x 4" ;D). Just east of downtown - so it's not as extreme as El Cajon.
Do you have natural gas?
-
Yes, natural gas is piped in and I have runs in both the attic and crawlspace.