SoCal Jet Boats

Discussion => The No Wake Zone => Topic started by: koyota93 on July 18, 2008, 12:24:04 AM

Title: Machine shop/ engine builder in OC, need a short block rebuild
Post by: koyota93 on July 18, 2008, 12:24:04 AM

Any one know of any good machine/ engine rebuilding shops in or around Orange County. I need a short block rebuild for my BBC 454. I am looking for pretty much a stock rebuild. Limited is an understatement for my budget. I just wanna get the boat done so I can finish off the season. What should I expect to pay? I got a quote of $2000 today, seemed a little steep. My buddy said to call National Crankshaft, anyone know if they are still around? Can't find their number anywhere. :banghead:

Title: Re: Machine shop/ engine builder in OC, need a short block rebuild
Post by: crewchief22 on July 18, 2008, 06:27:22 AM

There is a couple suggestions in here >>>   http://www.socaljetboats.com/index.php?topic=1615.msg20082#msg20082

Title: Re: Machine shop/ engine builder in OC, need a short block rebuild
Post by: AQUAHOLIC on July 18, 2008, 07:07:45 AM

my builder up here will freshen up, hone and rering a bbc for under 1k

Title: Re: Machine shop/ engine builder in OC, need a short block rebuild
Post by: thebeeter on July 19, 2008, 07:55:34 PM

engine supply in santa ana.
714 556 0310
ask for mike or call back LATER

Title: Re: Machine shop/ engine builder in OC, need a short block rebuild
Post by: jimbo on July 20, 2008, 11:12:03 AM

Yea, Iwas going on line to ask this same question . I need a quick valve job ,going to lake powell fri. Just found out I have a dead hole . In So. o.c. or  Long beach( work) . Thanks guys
Jimbo