SoCal Jet Boats

Discussion => The No Wake Zone => Topic started by: RushinEliminator17 on November 11, 2014, 08:34:46 PM

Title: Need Help identifying this deck hardware
Post by: RushinEliminator17 on November 11, 2014, 08:34:46 PM
I have seen these clips/deck hardware on a few boats... Looks like it's for mounting something... Hole is about 1/4" in diameter. Plastic piece is under the top stainless cover.

What is it, and what's it for?


Sent from my iPhone using SoCalJetBoats
Title: Re: Need Help identifying this deck hardware
Post by: tunnels on November 11, 2014, 09:01:33 PM
They are flag pole holders for holding up the SCJB flags. Everyone is doing it! 8)
Title: Re: Need Help identifying this deck hardware
Post by: 74 howard 21rc on November 11, 2014, 09:08:55 PM
My buddy had those on his spectra and they were used to clip his buoys to the side of his boat. They have a clip that goes into them so you don't have a cleat to tie them off.
Title: Re: Need Help identifying this deck hardware
Post by: RushinEliminator17 on November 11, 2014, 09:26:10 PM

My buddy had those on his spectra and they were used to clip his buoys to the side of his boat. They have a clip that goes into them so you don't have a cleat to tie them off.

They are on my spectra as well...Makes perfect sense. Knew it couldn't be something that would need a good amount of support.


Sent from my iPhone using SoCalJetBoats
Title: Re: Need Help identifying this deck hardware
Post by: RushinEliminator17 on November 11, 2014, 09:27:01 PM

They are flag pole holders for holding up the SCJB flags. Everyone is doing it! 8)

Tiny little flags! Lol


Sent from my iPhone using SoCalJetBoats
SMFPacks CMS 1.0.3 © 2026