SoCal Jet Boats

Discussion => The No Wake Zone => Topic started by: laveyjoel on June 17, 2016, 11:36:45 AM

Title: Place Diverter
Post by: laveyjoel on June 17, 2016, 11:36:45 AM

I need to replace my fittings and lines....plastic tubing.....

Question is bleeding/air in system....the change out is a no brainer...need advice on fluid/air bleed if at all......1990 system...never been touched...

Title: Re: Place Diverter
Post by: 88 Baker on June 17, 2016, 11:54:39 AM

I use ATF just work it air will purge out. All I do. Right or Wrong? But works


Sent from my iPhone using SoCal Jet Boats

Title: Re: Place Diverter
Post by: laveyjoel on June 17, 2016, 11:58:09 AM

Good point...did not even consider the fluid type....

Still, main question...is an air/to fluid bleed needed?

Title: Re: Place Diverter
Post by: laveyjoel on June 17, 2016, 11:59:34 AM

Control unit buried deep... gona pull "backyard" first....and look at it....

Title: Re: Place Diverter
Post by: 88 Baker on June 17, 2016, 02:29:33 PM

Shouldn't I just reinstalled mine n I just worked up n down a lil bit. It's fine


Sent from my iPhone using SoCal Jet Boats

Title: Re: Place Diverter
Post by: laveyjoel on June 17, 2016, 08:09:56 PM

Thanks for the feedback!! Sure will be easy to test!!