SoCal Jet Boats

Discussion => The No Wake Zone => Topic started by: pw_Tony on April 08, 2008, 10:10:31 PM

Title: Polishing kit
Post by: pw_Tony on April 08, 2008, 10:10:31 PM

So what's a good kit to get to polish aluminum? Looking for a selection of sand paper rolls, papers, scotch brights, etc. Anyone got a link for one of these kits?

Title: Re: Polishing kit
Post by: 429heads on April 08, 2008, 10:57:36 PM

Check out Jim's tools Hy 95 He has pads and large buffer wheel, and compounds. I have my
large grinder set up to buff know and have three different types compound's. come buy and try  it see what you need

Title: Re: Polishing kit
Post by: 82daytona on April 09, 2008, 07:16:37 AM

I got my stuff from the tool truck

Title: Re: Polishing kit
Post by: 2savage4you on April 09, 2008, 07:50:43 AM

Go check out Jerry's tools.......Got a lot of stuff.

2sav

Title: Re: Polishing kit
Post by: pw_Tony on April 09, 2008, 07:52:11 AM

Quote from: 429heads on April 08, 2008, 10:57:36 PM

Check out Jim's tools Hy 95 He has pads and large buffer wheel, and compounds. I have my
large grinder set up to buff know and have three different types compound's. come buy and try  it see what you need

Cool I'll come by and check it out. My buddy also wanted to give those SBC pistons a gander as well

Title: Re: Polishing kit
Post by: 429heads on April 09, 2008, 08:29:20 AM

Also have lots  Int 2.02 ss valves & 1.60 ex at least 4 or more sets new the
best a real good price also 1.94 & 1.50 ss  and stock steel sets and no chebbb
heads to build any more also talked to son and i have two sets 906 heads and one set 360 heads may
do one set 340 out to 2.02 & 1.60 to get some more bb heads lots 427/390 heads and 312 heads and 302,
 and ten set's 460 heads

Title: Re: Polishing kit
Post by: 2savage4you on April 09, 2008, 08:32:55 AM

I need a set of good flowing heads for next season ;D
New motor >:D
2sav

Title: Re: Polishing kit
Post by: pw_Tony on April 09, 2008, 10:42:01 AM

Quote from: 429heads on April 09, 2008, 08:29:20 AM

Also have lots  Int 2.02 ss valves & 1.60 ex at least 4 or more sets new the
best a real good price also 1.94 & 1.50 ss  and stock steel sets and no chebbb
heads to build any more also talked to son and i have two sets 906 heads and one set 360 heads may
do one set 340 out to 2.02 & 1.60 to get some more bb heads lots 427/390 heads and 312 heads and 302,
 and ten set's 460 heads

Elwood send me your number through a PM, when you start talking Mopar heads it gets me all excited  ;D Also looking for a SBC intake if you got one.

Anyone else got any links to some polishing kits?