Yes I said plow truck. This is for my 02 F-250 Super Duty. I converted an old school Diamond 8 Foot plow to mate to a Fisher Minute Mount set up. I have a lot of hours making the A-frame adapt to the Fisher set up, but I got it done. I am also building my own wire harness for the lights and the pump set up. Here is a relay panel I made that bolts directly to the Ford radiator support. I do not like drilling holes if I don't have to.

 TIGed the "bushings" and then counter bored them for socket head cap screws.
T.J.

Pics.
TIG Machine: Miller Dynasty 300DX
Settings:
  AMPs A/C 150
  Balance 74
  Frequency 200Hz (screams nicely)
  Tungsten 3/32 Lanthanated
  Filler 5356

This is just a mock up for the conversion. It is a heavy duty 8FT old Diamond Plow. It tops in at about 700 plus Lbs. I have it all apart and I am going to prime and paint it this week.
T.J.

X2

I could use that thing on my drive home . 

-beerjet-

No, you need one of the V shaped plows. They work better for pushing cars out of the way.

touche 

-beerjet-