good day gents,

i couldnt figure out how to post an image in a pm, so ive posted it here. apologies.

jet boat maloney,
does this look about what you were thinking of?  its a quick and dirt drawing mostly based on the pic you posted with your dimensions.  it isnt noted in pic that you want opening by carb to be oval....or did you want the entire vertical piece from carb to inlets, 'three tubes' to be oval? 

also, there are two styles in pic.  choose the closest one to your description please...

I like it


Sent from my iPhone using SoCal Jet Boats

Jarvis,

I want the one that is a oval. For a single 850cfm on a 454.

Pretty much if you looked at a top fuel dragster just with a base you attach to dual 750's


Sent from my iPhone using SoCal Jet Boats

Maloney,
I'm sure you see isn't to scale. Just has dimensions. The curve forward may be more pronounced when in scale. The round holes will be round. They look like they have a flat spot where the holes make contact with each other... and that will Still be there...otherwise there'll just be a same contact area and it would be weaker.  So for the oval, you want the vertical piece to be roundish....tapering to an oval??
looks like there'll be two versions....one for single the for duals. Thoughts? 

Excellent!!

I'll get cracking on figuring out costs.

Thanks.

hmm....not sure what you mean exactly....

the drawing i made was in windows paint...you might be able to copy image and paste in paint. then draw what you mean....
 

i cant see a lip, at least not on this pic. 

by lip, do you mean have the butterflies recessed half to 1 inch? 

if so....this scoop isnt going to have butterflies....

ah...ok.  yeah opening will be smooth and will transition into the vertical part.  the edge of openings will be contoured or with a radius on the edge.
thanks

Nice!
You want yours taller Yvonne right?  Looks shorter in pic....