SoCal Jet Boats
Discussion => The No Wake Zone => Topic started by: Kroggy3771 on June 13, 2015, 10:25:30 AM
-
I know Bill Scotten owns the Rouse gullwing molds. Anybody have info on how I can get in touch with him to talk about a new hull build. Can't seem to find his info anywhere. Thanks for the help guys
-
I could be wrong but if I remember correctly he is at the Nordic/ski boat dealer right off the 91frwy in corona I have seen a few roll out of there lately too ill see if I can find that location for you
Sent from my iPhone using SoCalJetBoats
-
Awesome thank you!!!
Sent from my iPhone using SoCal Jet Boats
-
http://www.tigewatersports.com/m_showroom.asp
Try calling them
Sent from my iPhone using SoCalJetBoats
-
No problem
Sent from my iPhone using SoCalJetBoats
-
Called and that's where Bill Scotten is. Thanks, I'll be going down there soon to talk about a new Rouse build
Sent from my iPhone using SoCal Jet Boats
-
Called and that's where Bill Scotten is. Thanks, I'll be going down there soon to talk about a new Rouse build
Sent from my iPhone using SoCal Jet Boats
bad ass bud glad I could help good luck on the build
Sent from my iPhone using SoCalJetBoats
-
Good info! I might be looking into one myself
Sent from my iPhone using SoCal Jet Boats
-
That's strange. he lives in vegas
-
Just called them today and they said he is there building boats, so who knows
Sent from my iPhone using SoCal Jet Boats
-
Do yourself a favor, call gs marine about building one. I think Greg as access to the rouse mold as well. Bill has a very bad reputation will rip you off if you are not careful.
Sent from McIntyre park
-
Well thank you jake. Appreciate that info. I'll call shoemaker
Sent from my iPhone using SoCal Jet Boats
-
Do yourself a favor, call gs marine about building one. I think Greg as access to the rouse mold as well. Bill has a very bad reputation will rip you off if you are not careful.
Sent from McIntyre park
good info right here, thanks jake!!!!