SoCal Jet Boats

Discussion => The No Wake Zone => Topic started by: LuckyDaze on April 05, 2008, 08:14:51 PM

Title: Sharing my excitement
Post by: LuckyDaze on April 05, 2008, 08:14:51 PM
So, I just finished rustling up enough cash to get my boat back up and running. The heads are going off to be taken care of and I'm pulling the bottom end apart tomorrow to have the block cleaned and prepped for rebuild.  So I have been jumping around a bit excited off of my ass to get the boat wet after three years of being dry.   Woot. 


~Brian
Title: Re: Sharing my excitement
Post by: BOOST on April 05, 2008, 08:51:11 PM
So, I just finished rustling up enough cash to get my boat back up and running. The heads are going off to be taken care of and I'm pulling the bottom end apart tomorrow to have the block cleaned and prepped for rebuild.  So I have been jumping around a bit excited off of my ass to get the boat wet after three years of being dry.   Woot. 


~Brian
Lets see some pics
Title: Re: Sharing my excitement
Post by: jet boat performance on April 06, 2008, 07:41:29 AM
Brian Whoo Hoo ! Always nice to see light at the end of the tunnel !
Title: Re: Sharing my excitement
Post by: 82daytona on April 06, 2008, 08:12:19 AM
Lets see some pics
x2
Title: Re: Sharing my excitement
Post by: ryanbrindle on April 06, 2008, 09:55:09 AM
Brian Whoo Hoo ! Always nice to see light at the end of the tunnel !

I feel ya here Brian.  I am finally seeing that light!  Just have to get the pump off to Tom this week and get some odds and ends and its finished!
Title: Re: Sharing my excitement
Post by: LuckyDaze on April 06, 2008, 08:44:51 PM
I will get some pictures up once the work starts. Right now pictures are boring. Just a hull with no motor in it. The heads just got shipped today to get smoked over.

~Brian
Title: Re: Sharing my excitement
Post by: AA/Paul on April 07, 2008, 07:30:38 AM
Get her done!!!  We've all been there. 8)
Title: Re: Sharing my excitement
Post by: LuckyDaze on April 09, 2008, 03:38:17 PM
took my cam in to be re ground over at Chet Herbert racing. *jumps around* Bottom end comes apart this weekend and clearances will be checked and bearings and rings will be ordered. Wooot.


~Brian
SMFPacks CMS 1.0.3 © 2026