SoCal Jet Boats

Discussion => The No Wake Zone => Topic started by: ONE-A-DAY on May 12, 2014, 11:19:22 PM

Title: What's this fitting for on my Bassets?
Post by: ONE-A-DAY on May 12, 2014, 11:19:22 PM

Isn't this port for running water into the pipes?  My pipes have the water lines plumbed into the bend near the block.
So what's this port for?  It blocked off.  Also anyone have a suggestion for something good looking to put in there before I have them jet coated?  There is a rusty Home Depot set up in the holes now.



Sent from my iPhone using SoCal Jet Boats

Title: Re: What's this fitting for on my Bassets?
Post by: GT Jets on May 12, 2014, 11:28:00 PM

Quote from: ONE-A-DAY on May 12, 2014, 11:19:22 PM

Isn't this port for running water into the pipes?  My pipes have the water lines plumbed into the bend near the block.
So what's this port for?  It blocked off.  Also anyone have a suggestion for something good looking to put in there before I have them jet coated?  There is a rusty Home Depot set up in the holes now.



Sent from my iPhone using SoCal Jet Boats

That little pipe is for running an evac system. Basically uses GM style SMOG "gulp" valves attached to the breathers (uses MOPAR style breathers).

GT

Title: Re: What's this fitting for on my Bassets?
Post by: TrollerDave on May 12, 2014, 11:36:03 PM

http://www.jegs.com/p/JEGS-Performance-Products/JEGS-Crankcase-Evacuation-Kit/924093/10002/-1 (http://www.jegs.com/p/JEGS-Performance-Products/JEGS-Crankcase-Evacuation-Kit/924093/10002/-1)

Just to see what the system looks like.

As for plugging it up, stainless pipe plug with the inset allen head?

http://www.jegs.com/p/JEGS-Performance-Products/JEGS-NPT-Pipe-Plugs/752570/10002/-1?itemPerPage=90&pno=1 (http://www.jegs.com/p/JEGS-Performance-Products/JEGS-NPT-Pipe-Plugs/752570/10002/-1?itemPerPage=90&pno=1)

or

http://www.jegs.com/i/Dynatech/329/785-10094/10002/-1?parentProductId=750022 (http://www.jegs.com/i/Dynatech/329/785-10094/10002/-1?parentProductId=750022)

Title: Re: What's this fitting for on my Bassets?
Post by: TrollerDave on May 13, 2014, 12:12:04 AM

Or you can just sell/ trade and get a set without the fitting.
They come up for sale all the time.

Title: Re: What's this fitting for on my Bassets?
Post by: ONE-A-DAY on May 13, 2014, 12:53:14 AM

Thanks!


Sent from my iPhone using SoCal Jet Boats

Title: What's this fitting for on my Bassets?
Post by: lbhsbz on May 13, 2014, 01:11:47 AM

Run a pan evac kit and use 'em.  No more oil dripping from the breathers, no catch cans, no PCV induced vacuum "leak".  I ran 'em on the white boat...worked nicely