What did you do to your boat today?

« **Reply #3150 on:** January 23, 2016, 12:22:25 PM »

Quote from: rutsracer on January 23, 2016, 11:57:36 AM

pulled the motor out to fix an oil leak. Then got a tunnel ram. Then sent the heads out for porting. Then got a larger cam. Now im looking for a set of 750 holleys and linkage. Its becoming one expensive oil leak

I have a nice set of 750's that may be for sale soon. With linkage and fuel lines

Sent from my iPhone using SoCal Jet Boats

« **Reply #3151 on:** January 23, 2016, 12:55:56 PM »

The wife doesn't think so

« **Reply #3152 on:** January 23, 2016, 01:00:50 PM »

Took the boat out to Chris from B1 racing to have some shoes shims and pump work done with a brand-new dominator bowl can't wait to see with this bowl looks like after it's fully detailed

Sent from my iPhone using SoCal Jet Boats

« **Reply #3153 on:** January 23, 2016, 01:03:08 PM »

Quote from: AnthonyH3 on January 23, 2016, 01:00:50 PM

Took the boat out to Chris from B1...

Sorry I missed you today.

« **Reply #3154 on:** January 23, 2016, 01:04:25 PM »

Quote from: Flusher on January 23, 2016, 01:03:08 PM

Sorry I missed you today.

. It's OK I'll be back just like terminator said

Sent from my iPhone using SoCal Jet Boats

« **Reply #3155 on:** January 23, 2016, 01:53:17 PM »

That's a killer shot of your hull. Wish I could have seen it in person.

« **Reply #3156 on:** January 23, 2016, 02:01:45 PM »

Quote from: Flusher on January 23, 2016, 01:53:17 PM

That's a killer shot of your hull. Wish I could have seen it in person.

thanks appreciate it

Sent from my iPhone using SoCal Jet Boats

« **Reply #3157 on:** January 23, 2016, 03:35:31 PM »

Changing the plug wires. Sure is fun cutting and measuring

« **Reply #3158 on:** January 24, 2016, 07:26:55 PM »

Re glassing the bitch.....

« **Reply #3159 on:** January 24, 2016, 09:20:39 PM »

Got the new fuel pump in, wired up and plumbed for the returns. Ran to elsinore for a shake down run before it goes to storage next weekend. Boat ran very well. Nitrous hit nice and hard as hell. Only did one nitrous pull then another one with the bottle off just to empty the line out.

This new magnafuel pump is awesome. They have a lifetime customer. Anything I buy will have one from now on.

Think the boat needs some more wedge, I'm at 2* now and it doesn't seem to porpoise, gonna try 3, 4, or 5 whatever my wedges will adjust to.

Got the boat off the water and my intake was covered in condensation. Tried my best to get a picture

« **Reply #3160 on:** January 25, 2016, 12:31:06 AM »

My tunnel ram gets covered in condensation too. I've been told it's actually a good thing.

Today I finished my dolly that I built to do the rest of the glass and gel work on my tx

Sent from my iPhone using SoCal Jet Boats

« **Reply #3161 on:** January 25, 2016, 01:42:10 AM »

When they condensate they are working!! Lol

Your Friendly local v-drive owner

« **Reply #3162 on:** January 25, 2016, 01:44:30 AM »

My tunnel ram gets covered in condensation when I cruse and when I'm on it no matter how hot it is out side it's a good thing

Sent by a Sleekcraft SST owner on the SoCal Jet boat app

« **Reply #3163 on:** January 26, 2016, 07:55:19 AM »

Startin to get some measurements done. Progress!

« **Reply #3164 on:** January 26, 2016, 08:11:32 AM »

Quote from: FordLover on January 26, 2016, 07:55:19 AM

Startin to get some measurements done. Progress!

What heads did you go with?

« **Reply #3165 on:** January 26, 2016, 08:42:34 AM »

Brand new Edelbrocks 60669. Needed the 95cc chamber to bring my compession down. Plus seemed like good heads and used by guys on the forum.

« **Reply #3166 on:** January 27, 2016, 08:45:27 PM »

Got my new fuel filter plumbed in and installed also installed my -8 fuel line and log to the carb.

Also picked up a new to me dominator bowl from BCouey and got it painted. Yes I ran it.

« **Reply #3167 on:** January 27, 2016, 10:03:29 PM »

Quote from: steves86ta on January 27, 2016, 08:45:27 PM

Got my new fuel filter plumbed in and installed also installed my -8 fuel line and log to the carb.

Also picked up a new to me dominator bowl from BCouey and got it painted. Yes I ran it.

Damn that was quick! Don't worry I ran it too the first time I painted it lol. Thanks for meeting up, hope it works well for you

Sent from my iPhone using SoCal Jet Boats

« **Reply #3168 on:** January 27, 2016, 11:15:50 PM »

Took the old bowl off and cleaned up the leading edges of the impeller with a file. Tried to take as little material off as possible. Before and after pics of one vein in particular.

Then I mounted the new bowl. I hope it fits in my berkeley transom adapter .

Cleaned up the silicone and it's ready to go on but my drill and screw gun are at the gf's house. I'll have to get them tomorrow

« **Reply #3169 on:** January 27, 2016, 11:21:29 PM »

I like the name of the boat...

Your Friendly local v-drive owner

« **Reply #3170 on:** January 27, 2016, 11:25:02 PM »

Quote from: aquaholic72 on January 27, 2016, 11:21:29 PM

I like the name of the boat...

Your Friendly local v-drive owner

I didn't choose it. Cane that way. The previous motor that was in this thing pushed it to damn near 100.

Mine nowhere close. If I keep the boat and have it repainted it'll go away.

« **Reply #3171 on:** January 28, 2016, 12:43:18 AM »

Ya i saw the magazine along time ago that the boat was in..think it had blown motor in it... still a cool name i think..

Your Friendly local v-drive owner

« **Reply #3172 on:** January 28, 2016, 12:49:45 AM »

Quote from: steves86ta on January 27, 2016, 11:25:02 PM

I didn't choose it. Cane that way. The previous motor that was in this thing pushed it to damn near 100.

Mine nowhere close. If I keep the boat and have it repainted it'll go away.

hey it still works for us slow boats.. i saw you at the elsinore shakedown that dennis organized, i was commin out of the la laguna no wake zone and you were makin a lap!! I couldnt run your ls down but i was tryin!! Lol..

Your Friendly local v-drive owner

« **Reply #3173 on:** January 28, 2016, 06:37:20 AM »

Quote from: aquaholic72 on January 28, 2016, 12:49:45 AM

hey it still works for us slow boats.. i saw you at the elsinore shakedown that dennis organized, i was commin out of the la laguna no wake zone and you were makin a lap!! I couldnt run your ls down but i was tryin!! Lol..

Your Friendly local v-drive owner

Ha! Thanks man. I'm slowly getting everything worked out and every time out its improving.
It's night and day from where it was back in November. Amazing how much more power an engine can make when it's got a good supply of fuel and electricity (long story).

Oh and the blown motor that was in my boat is the blown motor that's in corys winger

« **Reply #3174 on:** January 28, 2016, 07:39:52 AM »

Quote from: AnthonyH3 on January 23, 2016, 01:00:50 PM

Took the boat out to Chris from B1 racing to have some shoes shims and pump work done with a brand-new dominator bowl can't wait to see with this bowl looks like after it's fully detailed

Sent from my iPhone using SoCal Jet Boats

Bitchen looking 21', I love the green!

BCouey

rutsracer

AnthonyH3

Flusher

AnthonyH3

Flusher

AnthonyH3

455Whiskey Gal

jackogle64

steves86ta

BCouey

aquaholic72

matches909

FordLover

Flusher

FordLover

steves86ta

BCouey

steves86ta

aquaholic72

steves86ta

aquaholic72

aquaholic72

steves86ta

blender