SoCal Jet Boats

Discussion => The No Wake Zone => Topic started by: MBlack on April 17, 2010, 12:52:58 PM

Title: Will This Oil Pan Fit?
Post by: MBlack on April 17, 2010, 12:52:58 PM

http://www.summitracing.com/parts/HAM-1498/

I need a 10qt pan and was wondering if this will fit. It isnt a jet pan so Im not sure. What do you guys think?

Title: Re: Will This Oil Pan Fit?
Post by: beerjet on April 17, 2010, 01:01:47 PM

Close to this one and this one says it'll clear jet drives soooo...

http://www.summitracing.com/parts/MOR-21610/

-beerjet-

Title: Re: Will This Oil Pan Fit?
Post by: MBlack on April 17, 2010, 01:06:56 PM

Quote from: beerjet on April 17, 2010, 01:01:47 PM

Close to this one and this one says it'll clear jet drives soooo...

http://www.summitracing.com/parts/MOR-21610/

-beerjet-

That one's only 9qt though and I wanted to stay away from the $400 range.

Title: Re: Will This Oil Pan Fit?
Post by: beerjet on April 17, 2010, 01:53:57 PM

Quote from: MBlack on April 17, 2010, 01:06:56 PM

That one's only 9qt though and I wanted to stay away from the $400 range.

I was refering to the depth , both are 8".
The Moroso pan says it'll fit a jet drive so I can only assume the Burger pan will to with the same depth.

-beerjet-

Title: Re: Will This Oil Pan Fit?
Post by: MBlack on April 17, 2010, 02:16:13 PM

Quote from: beerjet on April 17, 2010, 01:53:57 PM

I was refering to the depth , both are 8".
The Moroso pan says it'll fit a jet drive so I can only assume the Burger pan will to with the same depth.

-beerjet-

Oh sorry didnt check that part :) So far from what Ive been looking at online it seems that pan would fit.

Title: Re: Will This Oil Pan Fit?
Post by: beerjet on April 17, 2010, 02:45:25 PM

Quote from: MBlack on April 17, 2010, 02:16:13 PM

Oh sorry didnt check that part :) So far from what Ive been looking at online it seems that pan would fit.

If you have an old one or stock pan, do a test fit to see exactly where the motor is mounted and it'll give you a more accurate dimension as far as to what will fit.
Not all motors are mounted at the exact same highth and not to mention you will have to clear at least the 2 center screws at the front of the intake so 8" might be enough or not .
Thats just me though.

-beerjet-

Title: Re: Will This Oil Pan Fit?
Post by: MBlack on April 17, 2010, 05:29:52 PM

Quote from: beerjet on April 17, 2010, 02:45:25 PM

If you have an old one or stock pan, do a test fit to see exactly where the motor is mounted and it'll give you a more accurate dimension as far as to what will fit.
Not all motors are mounted at the exact same highth and not to mention you will have to clear at least the 2 center screws at the front of the intake so 8" might be enough or not .
Thats just me though.

-beerjet-

Unfortunately my motor is out of the boat and at the shop.

Title: Re: Will This Oil Pan Fit?
Post by: blow it up on April 17, 2010, 06:10:53 PM

Just went through this my self. After my second pan I found the unit at Rex marine. It's a B&B stepps pan. It's $329.00 with pick up if I remember right. Screen windage,Black. I think it's the best bang for the buck. Check it out on performance boats forum in rex section or jet boat section :thumbup:

Title: Re: Will This Oil Pan Fit?
Post by: MBlack on April 17, 2010, 08:18:44 PM

Quote from: blow it up on April 17, 2010, 06:10:53 PM

Just went through this my self. After my second pan I found the unit at Rex marine. It's a B&B stepps pan. It's $329.00 with pick up if I remember right. Screen windage,Black. I think it's the best bang for the buck. Check it out on performance boats forum in rex section or jet boat section :thumbup:

Cool, I'll call them Monday. Hopefully they'll actually have it in stock. Of the 4 times Ive ordered from them they've never had what I ordered in stock.

Title: Re: Will This Oil Pan Fit?
Post by: blow it up on April 17, 2010, 10:13:04 PM

They got them! Ask for Ryan. He will have it to you in orange next day!

Title: Re: Will This Oil Pan Fit?
Post by: blow it up on April 17, 2010, 10:22:28 PM

Oh and make sure you know what oil pump you got because they will ask you so they send the right pick up. Rex's number is 909 592 1000. Sick pan alot of people are going to them that had other stuff that was supposed to be good but are getting oil presure issues when you let off. :thumbup:

Title: Re: Will This Oil Pan Fit?
Post by: MBlack on April 17, 2010, 10:46:25 PM

Quote from: blow it up on April 17, 2010, 10:22:28 PM

Oh and make sure you know what oil pump you got because they will ask you so they send the right pick up. Rex's number is 909 592 1000. Sick pan alot of people are going to them that had other stuff that was supposed to be good but are getting oil presure issues when you let off. :thumbup:

Yeah I saw that when I was checking it out, thanks for the info man looks like a sick pan.

Title: Re: Will This Oil Pan Fit?
Post by: MBlack on April 21, 2010, 03:37:01 PM

Quote from: blow it up on April 17, 2010, 06:10:53 PM

Just went through this my self. After my second pan I found the unit at Rex marine. It's a B&B stepps pan. It's $329.00 with pick up if I remember right. Screen windage,Black. I think it's the best bang for the buck. Check it out on performance boats forum in rex section or jet boat section :thumbup:

Good lookin' out man. I got the oil pan yesterday and dropped it off with the guy doing my engine rebuild. Very nice pan at a good price too. Thanks again.

Title: Re: Will This Oil Pan Fit?
Post by: blow it up on April 21, 2010, 09:02:18 PM

Glad that worked out!  :thumbup: