SoCal Jet Boats
Tech Talk => Trailers => Topic started by: stierney11 on April 03, 2015, 05:49:11 PM
-
Well I was going to fix my trailer my self but it is past my skill level and would like to get sum help so I can be floating this summer I have a mig tig and arc welder to use so if any one knows sum one or can help let me thanks and im in Costa Mesa
Sent from my iPhone using SoCalJetBoats mobile app
-
im near by you. i can weld it. hard to tell in the pic what the problem is....looks like some rot on a cross member...., correct?
-
im near by you. i can weld it. hard to tell in the pic what the problem is....looks like some rot on a cross member...., correct?
It is a cross member it's around 5.5' of 3x2 steel
Sent from my iPhone using SoCalJetBoats mobile app
-
so it is rusted out there in the center? looking to replace the center rusted piece?...
-
It's the center and a few inches up
Sent from my iPhone using SoCalJetBoats mobile app
-
sending you a pm....
-
Looks like you have the hard part done (removing the boat).
Good luck with the build.
-
Looks like you have the hard part done (removing the boat).
Good luck with the build.
Actually that was really easy I used a chain fall and a few rigging straps and a engine lift done in 25 min but that's with out the motor hahah
Sent from my iPhone using SoCalJetBoats mobile app
-
I may have some stuff you need. Let take an inventory tomorrow
-
I may have some stuff you need. Let take an inventory tomorrow
Thank u GT Jets
Sent from my iPhone using SoCalJetBoats mobile app