SoCal Jet Boats

Tech Talk => Trailers => Topic started by: trmn8ter on June 10, 2015, 04:47:59 PM

Title: TRAILER WORK
Post by: trmn8ter on June 10, 2015, 04:47:59 PM

Anybody know of a good trailer repair place close to Rancho Cucamonga?   I need the runners redone and trailer painted on a 18' Southwind jetboat... 

Thanks in advance

Title: Re: TRAILER WORK
Post by: jimpen on June 10, 2015, 06:02:31 PM

Quote from: trmn8ter on June 10, 2015, 04:47:59 PM

Anybody know of a good trailer repair place close to Rancho Cucamonga?   I need the runners redone and trailer painted on a 18' Southwind jetboat... 

Thanks in advance

i. Is the boat off the trailer?


Sent from my iPhone using SoCal Jet Boats

Title: Re: TRAILER WORK
Post by: JARVIS on June 10, 2015, 08:42:38 PM

i have a shop here in stanton.  about 30-45min from rancho...
i can replace your bunks, carpeted and have trailer painted.  my painter is a couple doors down from my shop.  you can reach me here or on cell.  send/post pics of what you have.  to get a more accurate/best quote, we'd need to see your trailer. particularly for painting.  id prefer if boat was off trailer....but if not, we can pull it off.  i have a dolly we can put it on in the mean time.
562.644.1168

Title: Re: TRAILER WORK
Post by: jetjunky101 on June 10, 2015, 08:55:17 PM

Quote from: JARVIS on June 10, 2015, 08:42:38 PM

i have a shop here in stanton.  about 30-45min from rancho...
i can replace your bunks, carpeted and have trailer painted.  my painter is a couple doors down from my shop.  you can reach me here or on cell.  send/post pics of what you have.  to get a more accurate/best quote, we'd need to see your trailer. particularly for painting.  id prefer if boat was off trailer....but if not, we can pull it off.  i have a dolly we can put it on in the mean time.
562.644.1168

What dose this normally cost ... I need some rust repair and paint and probably bunks ... but I am just couious on what it would cost "me" compared to a pro doing it .  Thanks

Title: Re: TRAILER WORK
Post by: JARVIS on June 10, 2015, 09:27:17 PM

Sure.
For bunks price ranges from about $350-400 depending on how long bunks are and if you choose stainless staples.
For painting. Hard to say. If heavily rusted but salvageable... meaning no welding required.... 800-1000.
if light surface rust, price come down. Size of trailer affects price.
If welding is needed, say to replace a cross member, looking at 250-350 in addition to paint work.
So....1400-1750 depending on What's needed and materials used. If replacing bunks, welding and painting that is....
Price varies on work needed.