so over the weekend i put the carpet on the bunks and showed my dad the holley ultra hp 750 and he said to order them. after the first time we start the engine i get to order them and the 600's will be passed down to my project boat (the miller). the 450's on that will be passed down to the parts crate

took the casale to casale yesterday there doing seals, bearing, swirl away, and 15% gears then we got the bell housing today
we decied the color scheme of aluminum parts of the boat are going to be: black, blue, and polished

its finally off now some trailer work is in order

Does that blue match pretty well? If it does...go blue
Color matched trailers are always badazz.

Daniel

ya or nay on the 18" iroc rims

well todays project is to wipe down the inside and start laying the filler

ok so went to the neighbors and got some more part were going to nickel plate the strut, skeg, and rudder. then i put the old rails in just to see where the motor will sit. then im looking at the back of the boat and notice the cavitation rod holes are starting to crack and chips and the deck is starting to crack. while the casale is sitting in the room it has been leaking so we have to take it back. then last thursday my dad took the calgo steering to gs marine to get rebuilt

we went and had the calgo steering rebuilt at gs marine notice this place was like half a block from where we store our other boat. other than that this boat has just been sitting waiting for its turn to be finished

Got the water pump


Sent from my iPod touch using SoCalJetBoats

Aircraft stripped is my new friend