SoCal Jet Boats
Tech Talk => V-Drives => Topic started by: lilrick on April 05, 2008, 09:39:05 AM
-
need a prop for my cruiser.
-
I got one, Its a little bent. ;D Don't go to Big Bend with a prop. There is Rocks Everywhere. :banghead:
-
Give me the details
Size, pitch,etc.
-
I got one, Its a little bent. ;D Don't go to Big Bend with a prop. There is Rocks Everywhere. :banghead:
It aint that bent . Shit you ran it the rest of the weekend :D no probs right . :D
-beerjet-
-
Well.....I droped off the prop at a repair shop and they said it was 2 inches out of pitch. So its worthless. But I did not want to throw It away, So I came up with an Idea. I stoped by BeerJet's house for some Cold Beers and came up with this. :o
-
Great idea until you come out at night, drunk and in a hurry and cut your leg open >:D
Damn, thats gonna hurt.
-
You got that right!!!!!!! I'll take my chances. :screwy:
-
Hey...I'm not the sharpest tool in the shed,but :banghead: :-[.....If you ran that prop,arent you takin' chances on takin' out the shaft bearing/seals?? Just curious ??? But just about every thread i've posted on here...Someone has (supposedly) proven me wrong! :mad: Anyway,again.....Just curious :sly:
-
It aint that bent . Shit you ran it the rest of the weekend :D no probs right . :D
-beerjet-
Thats what I was referin' too.....
-
Better beer might help you come up with some better ideas. Then again hangin' with BJ ain't real bright either. j/k ;D
-
Its the best use I have seen for a prop yet! ;D
-
Hey...I'm not the sharpest tool in the shed,but :banghead: :-[.....If you ran that prop,arent you takin' chances on takin' out the shaft bearing/seals?? Just curious ??? But just about every thread i've posted on here...Someone has (supposedly) proven me wrong! :mad: Anyway,again.....Just curious :sly:
There actually was several other things wrong . I'll let the camel toe explain it though .
-beerjet-
-
I only ran the boat a little bit all weekend, just going up river to float down and drink some Beers. It was not the best Idea to run the boat but it happened on the frist day. I couldnt let that ruin my weekend. The bigger problem was finding out after I put a new prop on that the shaft was bent to hell to. I you look closely at the pix the end of the shaft is welded to the steel, the rest of the shaft was left at beerjets house because he loves boat shit layin around. ;D
-
If you look closely at the pix the end of the shaft is welded to the steel, the rest of the shaft was left at beerjets house because he loves boat shit layin around. ;D
I'm a lover and collector of all things unique . (https://www.socaljetboats.com/cpg/albums/userpics/10034/idea_2.gif)
-beerjet-
-
do you still need a prop?
-
No that boat is long gone. ;D
-
are you still looken 4 a prop, i got a 3 blade 17 deg. i beleave let me know,
-
boat is gone, thanks.
-
Hey , are you sure you don't need a prop? ;D