SoCal Jet Boats

Tech Talk => V-Drives => Topic started by: Mothyu812 on September 16, 2015, 10:41:41 PM

Title: River rat water pump
Post by: Mothyu812 on September 16, 2015, 10:41:41 PM

I have a fuel injection system and I'm looking for a water pump is there anyone have one


I'm looking for a timing chain cover for the fuel pump in someway to hook the water pump to
It's my first time in Feel Injection

Title: Re: River rat water pump
Post by: aquaholic72 on September 17, 2015, 12:48:51 AM

Lifted250 probably has a cover... whats this setup going in?

Sent from my MB860 using SoCal Jet Boats mobile app

Title: Re: River rat water pump
Post by: Mothyu812 on September 17, 2015, 01:52:40 AM

498 almost done with it


I'm looking for a timing chain cover for the fuel pump in someway to hook the water pump to
It's my first time in Feel Injection

Title: Re: River rat water pump
Post by: Mothyu812 on September 17, 2015, 01:54:09 AM

I'm looking for one of these water pumps


I'm looking for a timing chain cover for the fuel pump in someway to hook the water pump to
It's my first time in Feel Injection

Title: Re: River rat water pump
Post by: aquaholic72 on September 17, 2015, 03:01:51 AM

Cant help there,, but i run a 12 volt utility water pump mounted to the stringer on my v-drive, works bitchin if that can work for you..

Sent from my MB860 using SoCal Jet Boats mobile app

Title: River rat water pump
Post by: K-034 on September 17, 2015, 07:39:26 AM

Mike Kuhl has them, call Connlly Marine in Havasu he can probably help you out, also if you need a hand setting up the injector get a hold of Gorr fuel systems, great guys and one of the best in the business


Sent from my iPhone using SoCal Jet Boats

Title: Re: River rat water pump
Post by: Blue2184 on September 17, 2015, 08:45:53 AM

Check with good vibrations online...


Sent from my iPhone using SoCal Jet Boats

Title: River rat water pump
Post by: Mothyu812 on November 24, 2015, 06:42:27 AM

It's coming along had S&S performance Marine help me out with my pickup tube welded it up on my rudder pics will show up soon what a great job Scott did  for me.

Title: Re: River rat water pump
Post by: Flusher on November 24, 2015, 10:24:24 AM

That Mike Kuhl deal is the way to go.

You will need a cam hex drive and a timing cover with a mount for the water pump/fuel pump.  You might need an extension to clear your damper.  The hex drive will also act as a thrust bearing for your cam as a bearing will slip over it and shim against the inside of the timing cover.

If you don't wish to deal with driving off the cam, you can always run a belt drive remote mount available from the companies listed above as well as Kinsler, Enderle, Hilborn, Ron's, FIE, et al.

Can't wait to see it on the water!

Cheers,

Joe

Title: River rat water pump
Post by: Mothyu812 on December 21, 2015, 11:46:57 PM

Thanks

Title: Re: River rat water pump
Post by: Mothyu812 on March 10, 2016, 10:00:31 AM

I'm looking for a Jen 6 hex head size 3/8 that mounts on front of the Cam and it runs a river rat water pump and does anybody know where I can find one or build me one


I have a scat crank and I'm trying to figure out what internal flex plate to use. It's a mark 4 block 454