SoCal Jet Boats
Discussion => The No Wake Zone => WarZone => Topic started by: old rigger on October 03, 2007, 04:41:38 PM
-
Beginning notes to this thread
This thread was split off from another thread located HERE (http://www.socaljetboats.com/index.php/topic,1781.0.html). Please keep the other thread on topic and continue the discussion here. No personal attacks will be allowed. Keep it friendly and post your facts.
You just HATE it when someone shows the real history, don't you. How about showing the guys history that you mentioned. With all due respect, how is it that Miller held all the speed records if these guys you mention are so world renowned? They may have been there in the beginning but who's name shines?
Who's name shines????
What are you talking about, you have heard of Hallett boats haven't you? You glean one little fact about one little buider and then claim to know the REAL history, give me a break. It would only go to figure that you don't know about Wickens Whirlwind and it's Aqua Craft connection.
Before you go shooting your mouth off again do your home work. Better yet, go build your $1500, 700hp big block that you claim you can build and finally, please show us your dyno results.
-
Who's name shines????
What are you talking about, you have heard of Hallett boats haven't you? You glean one little fact about one little buider and then claim to know the REAL history, give me a break. It would only go to figure that you don't know about Wickens Whirlwind and it's Aqua Craft connection.
Before you go shooting your mouth off again do your home work. Better yet, go build your $1500, 700hp big block that you claim you can build and finally, please show us your dyno results.
:o :-X
-beerjet-
-
Who's name shines????
What are you talking about, you have heard of Hallett boats haven't you? You glean one little fact about one little buider and then claim to know the REAL history, give me a break. It would only go to figure that you don't know about Wickens Whirlwind and it's Aqua Craft connection.
Before you go shooting your mouth off again do your home work. Better yet, go build your $1500, 700hp big block that you claim you can build and finally, please show us your dyno results.
See you PM!!! >:(
-
I don't like to respond to pms much, so I'll post your PM here to give you answer...
"Why don't you take your happy ass back to LLB where you can pass yourself off as knowing something. Sorry, I'm $500 over budget and have my 700 HP. What the hell do you have? Nothing but pure BULL SHIT! I don't see a damn thing you've accomplished except blowing smoke up someone's ass!"
I don't believe you can do 700hp for $2000 starting with a junk yard block like you said. Prove it.
-
I don't like to respond to pms much, so I'll post your PM here to give you answer...
"Why don't you take your happy ass back to LLB where you can pass yourself off as knowing something. Sorry, I'm $500 over budget and have my 700 HP. What the hell do you have? Nothing but pure BULL SHIT! I don't see a damn thing you've accomplished except blowing smoke up someone's ass!"
I don't believe you can do 700hp for $2000 starting with a junk yard block like you said. Prove it.
Sorry Brad. I tried!
-
WOW ! You got some real good eyes :o cuz I dont know anyone who can see bullshit from sac town to the LBC . :D
-beerjet-
-
GAWnCA,
I'm not trying to scold you or humilate you, but I believe you are in the wrong here. oldrigger has been around these boats and knows them well. His posts are priceless to people like me who love to hear about the history. In my book, he has a lot that none of us have....the stories he has are worth more then a $2k motor to me.
I dont know the history of this whole 700hp motor for $1500 story, but im curious...
I'm not trying to be a jerk, but can you prove that you have done it? even for $2,000
-
Where's the prove?????? ??? There are alot of guys that would want a 700hp motor for 1500 to 2000
-
Where's the proof?????? ??? There are alot of guys that would want a 700hp motor for 1500 to 2000
[/quote
Fixed it for ya,
but thats no lie, i would love to do it.
2sav
-
Where's the prove?????? ??? There are alot of guys that would want a 700hp motor for 1500 to 2000
I want one! I've got plenty of used parts to pick from (blocks, cranks, two different sets of the less than 8 pistons, two sets of heads, etc... ). Flock it, I'll even go to a... uhg... a Ford if I have to. :'(
I dig Old Rigger's posts even though he's usually correcting me (rightfully so >:( :D ).
I also liked GAWnCA's post on Miller boats and the link in that post. Very cool sh!t. ;)
One thing is for sure, now I've finaly seen what it looks like on the internet when somebody goes off/takes something the wrong way. It's usually me who gets all fired up for the wrong reasons (IMO). ;D Damn it only took several months to see it too. :-\ ;D
-
Rod,
this could be soothing therapy for ya ;D
2sav
-
Rod,
this could be soothing therapy for ya ;D
2sav
Not sure about the soothing part but it is definately free therapy. ;D
-
I want everyone to concentrate on the fact that the rest of us dumbshit's are spending thousands of dollars for lake motors when all we need to do is spend $2000 tops for a 700 hp animal . ;D Get with the program muther fukers !
-beerjet-
-
GAWnCA,
I dont know the history of this whole 700hp motor for $1500 story, but im curious...
I'm not trying to be a jerk, but can you prove that you have done it? even for $2,000
No he can't prove it and he's had plenty of time to do so.
Here's what happened, soon after gawnca joined over on Cas's laid back boaters site he claimed in a post that he could take a junk yard long block big block, any brand big block, BBC-BBF or Mopar and for another 1500 bucks over the cost of the junkyard big block he could build an engine that made 700 hp. He listed some times and speeds that he's run in the 1/4 mile in a car using this mystery formula for his engine builds. I called him on it, told him I don't believe it could be done and asked to see his dyno slip proving this claim that he had already done it. No response except for this pm I got from him on that board...
gawnca: "I took this off line since you want to be so damn childish. I did get 650 HP for $1800.00 though. Only 50 HP short and a $100 over budget and I didn't shop at all for bargains. So stick it in your ear."
(I love it how a member can grow a set of balls when sending a PM.)
So after I got the pm on LBBB I again asked him to show us how to get the now reduced and lower 650hp from the revised amount of $1800, because I don't believe it can be done unless he's got a garage full of parts stashed away. But this isn't the case here, he claimed that he could do it by using new parts and not shopping for bargians. I asked him to show us anything, reciepts, a parts list, a build list, anything, but all he did was to childishly go back and delete all his posts from that site and came running over to this site. ::)
And, we're still waiting. Don't hold your breath.
-
We know it, i just priced a intake for my new motor. $409.00 and that dont include the new rings i need and bearings and oil pump and on and on. i do have all my maching work done and im still looking at a good $2,000 for a motor that puts out only 400 horsie's.
Maybe he got it after christmas on a half off sale, who know's ;D
But i think the point has been made.
old rigger, do you have anymore info on that fantasy im doing? Like max hull speed, i got questions for ya man ;D
2sav
-
Can we say 500hp shot of the funny stuff ;D
-
Can we say 500hp shot of the funny stuff ;D
Remember if we blow that motor Blower Boy, you are telling my ol'lady not me :o
Funny stuff is out ::)
2sav
-
Can we say 500hp shot of the funny stuff ;D
that's one way but he also said the engine will run 9's and 10's all day long. I'm thinking a 500 shot will get the 700 hp on a junk yard engine for about 3 seconds then go kaboom.
Greg,
I tried explaining to you about oldrigger's experience via pm's quite awhile ago and apparently you just didn't want to believe it. OR lived and literally breathed these boats for many years and has hands on experience building them with a couple of the best in the business. I'm hoping that you will finally get it.
-
I'm not going to say its not possible to build 700hp for $2000. I am going to say that the person to do it would have to be able to purchase parts at WD pricing, and perform most machine work and assembly himself at no cost.
This is NOT realistic for most people.
Any machine shop with any experience in building performance engines get a premium for the knowlege on how to do it right (just about any moron can assemble and engine and get to run).
The other problem with trying to stay within a limited budget is that you may go for the best deal for those "made in China" components and find that you have to pull it down two more times to get a good one, there went your $2000 build because you now spent another weekend rebuilding.
Just my .02
-
what am i doing wrong ??? i spent close to 7,500
-
He has to be talking about buying one of those cheap stroker kits on ebay and a carb and doing all the machine work himself.
-
what am i doing wrong ??? i spent close to 7,500
I don't know you bought those heads, so there is $2800
Victor intake $280
Dominator carb $800
Valve train $1800 (guides, seals, springs retainers locks valve seats)
Roller cam $ 300
Roller lifters $600
And I can go on and on and on and on.
-
I don't know you bought those heads, so there is $2800
Victor intake $280
Dominator carb $800
Valve train $1800 (guides, seals, springs retainers locks valve seats)
Roller cam $ 300
Roller lifters $600
And I can go on and on and on and on.
i tried to round it off, but you forgot the machine work, stroker kit, oil pan/pump and on and on :-\
-
I think for just about any good build min of $5k not counting bolt ons.
-
Anythings possible, I got about 1800 into this motor, including the '66 Nova SS the block and heads came out of, free blower off a diesel, machined it myself.....
JACK:
Started putting together another flatbottom last weekend. Got the Boat/trailer, block, crank, heads n rods. Got "O" into it right now. The name of my outfiet is "Cheap Ass Boats", anybody got some headers or motor mounts for chevy?
-
My best attempt at HP vs Low Cost story...
Note: not taking any sides here ;D this was just a budget build ;)
A few years back (while we still had a machine shop out back, think 10years now, key point) I put together a motor, 390 FE for my 76 Ford truck. All the machinging was done in house free, which if I added up all the Pro work done (stress plate boring cylinders and line boring, ballancing and blueprinting I went through) would have added a few thousand I'm sure. All I needed to buy was Cam, Pistons, rings, bearings, cross bolt kit, rockers (1.7-1,adj), lifters, oil pump, timing chain kit, gasket set, intake, carb and maybe a few more little things. Now, at my cost (wholesale!) that came to just over $1750.00cad If I factor in the cost of a block/heads/engine they were already on the motor I got for $300. (lucky me, all rare performance stuff :D )
My end result was a dyno of just over 450HP and a cost of $2100.cad. I thought I did rather well ??? but maybe not so well, glad I did not have to pay for a machine shop ;)
Could have gotten more power with bigger cam, solid lifters and carb, but I wanted good gas milage too ::)
Rebel
-
My latest PM from GAWNCA...such a happy man.
"Here post this Mother ****. If you're going to start shit, at least tell them the truth. I said for $1700 I could take a motor and turn it into a 700 HP motor. Get the story straight or don't tell it. You have to be one of the most CHILDISH SON OF A BITCHES I've ever met. Tell your buddy Steve (CAS) I don't think much of him either! PM THIS!!!
NOTE, I took my conversation off line. And yup, maybe this next summer I'll build that motor and save ever receipt just to show your sorry ass that you don't have to have $1000.00 heads and a blower to make power. Then I'm coming down and ram it up your ass!
Too bad you don't have the balls the size of your mouth, your wife, if you have one, would be much more happier and you might have a life."
-
My latest PM from GAWNCA...such a happy man.
"Here post this Mother ****. If you're going to start shit, at least tell them the truth. I said for $1700 I could take a motor and turn it into a 700 HP motor. Get the story straight or don't tell it. You have to be one of the most CHILDISH SON OF A BITCHES I've ever met. Tell your buddy Steve (CAS) I don't think much of him either! PM THIS!!!
NOTE, I took my conversation off line. And yup, maybe this next summer I'll build that motor and save ever receipt just to show your sorry ass that you don't have to have $1000.00 heads and a blower to make power. Then I'm coming down and ram it up your ass!
Too bad you don't have the balls the size of your mouth, your wife, if you have one, would be much more happier and you might have a life."
I would love to see his supplier for parts/maching work ;D
Hell my woman would love it if i only spent $1,700 on my motor, but that aint gonna happen.
GAWNCA, relax bro this aint no BIG deal ;D Let's move on to something else.
My opinion.
2sav
-
I would love to see his supplier for parts/maching work ;D
Hell my woman would love it if i only spent $1,700 on my motor, but that aint gonna happen.
GAWNCA, relax bro this aint no BIG deal ;D Let's move on to something else.
My opinion.
2sav
Tell that to your childish friend. I guess this is the only attention he gets. He had to bring this up for a month ago and from another forum. He needs you guys as his cheering section. I've tried to be nice and take my comments off line like a MAN but that isn't good enough for him. You like cheering for a has-been fine. He reminds me of old computer geeks, still trying to reclaim the past. It don't fly with me. By the end of this next summer we'll see who can do what. I'm just getting back into the engine playing and it's been about 35+ years since I did any racing. I had a car that ran 10.6 in the 1/4 mile (1970) and it was completely street legal and ran on pump gas. That was a Dodge Challenger. Now I know boats are somewhat different but that knowledge will come as well.
He has turned a simple statement into a major ordeal. Cheer on folks.
-
Tell that to your childish friend. I guess this is the only attention he gets. He had to bring this up for a month ago and from another forum. He needs you guys as his cheering section. I've tried to be nice and take my comments off line like a MAN but that isn't good enough for him. You like cheering for a has-been fine. He reminds me of old computer geeks, still trying to reclaim the past. It don't fly with me. By the end of this next summer we'll see who can do what. I'm just getting back into the engine playing and it's been about 35+ years since I did any racing. I had a car that ran 10.6 in the 1/4 mile (1970) and it was completely street legal and ran on pump gas. That was a Dodge Challenger. Now I know boats are somewhat different but that knowledge will come as well.
He has turned a simple statement into a major ordeal. Cheer on folks.
I find this very interesting. You bash or for living in the past yet you're doing the same thing. There is a lot of info from the past that is very useful today whether it be about engines or hulls.
As far as you not thinking much of me, that's your perogative (or is it prerogative) and it really doesn't bother me in the least. I find it real interesting how often you still visit the LBB board to read what's there and then ask questions about what's posted on other boards. I guess you can figure out that clicking on invisible mode doesn't really make you invisible to all.
In any case, most everyone on the boards are there to give a helping hand to people who need the help and/or advice. Most of us really don't like to see people making the same mistakes that a lot of us have already done. Granted, some of the advice or suggestions are a bit off which can and will produce more questions, like all those pm's you sent me. I don't think less of you Greg, I just think you're somewhat misguided in what you're trying to do.
If you can build a 700 hp engine for the cost you posted, that's great. What's interesting about a jet pump is it's like a dyno. The HP of an engine can be determined by the rpms it spins a certain sized impeller. As mentioned before, time will tell what kind of HP your engine puts out, hopefully you get what you're claiming and disprove the rest of us.
-
Tell that to your childish friend. I guess this is the only attention he gets. He had to bring this up for a month ago and from another forum. He needs you guys as his cheering section. I've tried to be nice and take my comments off line like a MAN but that isn't good enough for him. You like cheering for a has-been fine. He reminds me of old computer geeks, still trying to reclaim the past. It don't fly with me. By the end of this next summer we'll see who can do what. I'm just getting back into the engine playing and it's been about 35+ years since I did any racing. I had a car that ran 10.6 in the 1/4 mile (1970) and it was completely street legal and ran on pump gas. That was a Dodge Challenger. Now I know boats are somewhat different but that knowledge will come as well.
He has turned a simple statement into a major ordeal. Cheer on folks.
Oh he's one of those Dodge azz holes >:D jk
usually on ever other forum he's very nice and does bash others, this is kinda weird to read
-
gawnca,
When you're ready to come down to ram that up my ass, let me know and I'll give you my address.
'Course I'm guessing this might be a while because I can only imagine it takes a lot of time for the Horsepower Fairy to visit all her belivers that live in bullshit land. But I'll be here waiting for you just the same, sitting next to my box of fiberglass shavings, a half gallon of kicked resin, my dads ashes and my tool box longing for the days when I was really somebody building boats .
-
gawnca,
sitting next to my box of fiberglass shavings, a half gallon of kicked resin, my dads ashes and my tool box longing for the days when I was really somebody building boats .
oh that's good...
-
gawnca,
'Course I'm guessing this might be a while because I can only imagine it takes a lot of time for the Horsepower Fairy to visit all her belivers that live in bullshit land.
I thought it was Bullshit city ??? Oh man , now I'm really confused.
I really think your flyin off the handle not because rigger thinks he know it all but because he called you out on your numbers . Those numbers might be a little bit more relative 30+ years ago . If rigger wouldnt have called you out on it , somebody else would have . Why dont you be a MAN and just deal with it . Feel free to shut us all up with ANY evidence.
-beerjet-
-
I thought it was Bullshit city ??? Oh man , now I'm really confused.
Yo Homey, now you be talkin bout my hood. Sup wit dat ;D
2sav
-
I wish I could find a good link to the the actual articles but Mopar Muscle Magazine has been running a series every year where the best builders in the country build the best motor they can while having cost averaged in to determine a winner. First they built Hemi's then they built 500cu in wedge motors. All were in the 700 hp area with the winner at more like 750. Every one of them had more than $1700 in just heads and valvetrain easy. The cheapest place I know of to buy quality roatating assemblies (piston, rods, bearings, rings etc.) would charge almost $1500 for just that. I guess things must be really different in SackTown.
Here is a post showing real world dyno numbers on motors built to acheive 700 hp as cheaply as posssible. In my world these motors all run over $6000.
http://www.moparmusclemagazine.com/eventcoverage/mopp_0707_mopar_engine_challenge
How come GM, Ford, or Mopar can't/won't build even a 600 hp crate motor for $1700? $2700? $3700 $4700
Hmmmmmmmmmm . . .
-
2sav, how long have you lived in Bullhead?
We haven't been there for many years, drove through it about 7 years ago to show my wife and kids around and I couldn't believe how it has changed.
My grand parents moved there in 1960 and built the first home in the Riveria, which was kinda swanky back then but I don't even know what the hell it is now. We started to go the river in '61 and my folks and aunt and uncle rented a little place in one of the trailer parks for a few years and then bellied up I think in '63 and bought a trailer. We were the 3rd trailer from the water in Wagonwheel trailer park, which was still there when we drove through, until '72 when my folks bought in Parker. Our little trailer didn't even have a bathroom in it.lol But the park had shower and a bathroom.
It was a lot of fun back then, no Laughlin, no power plant, no signials in Bullhead nothing but endless flat, cold, water to ski on. It was perfect for out little flat bottom.
Just curious about where you live and how it is today? I haven't spent any real time there since my grand parents both died in 1980.
My folks and I, 1961 on the Laughlin side of the river with Bullhead in the background.
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv210%2Fflyin-t%2Fthumper1.jpg&hash=85d240974fdecc1913fbec1ea1310546d5a6ceb9)
-
OR-
That has got to be one of the coolest pics I've seen posted here. What kind of boat was that? Any idea where it is today? I'm big on the historical aspect of things, I've got Larry Shinoda's 29 ford roadster pick up, he helped Duntove design the corvette 8)
-
Back in the early 90's I was building a 28 roadster pu baised on the 2 pictures of Larrys. That is still one of my all time favorite hot rods. I've got to get to your place and see that pu.
Dads boat was a 'Catalina Conquest'. Named so because the builder and his buddies raced tham in the annual water ski race to catalina and back.The guy that built them was a fireman, a pretty common thing back in then. My dads cousin was a fireman and was a rigger for Len Schiada back in the day. I've heard that his shop was a big hang out for them too?
But the guy that built dads boat only built 13, did it locally here in Long Beach on Siginal Hill. My dad sold it to my moms brother in about '71, he painted it all white and then sold it to her other, younger brother, the one who lived in Bullhead. But he bought it after his 2 tours in Nam '66-'68 as a Marine gunner on a huey. He used it for a while and then sold the engine to a guy. That's where the trail ends and that was in about 1974-5. I bugged my parents for years and they could never remember the name of the guy that built the boat. I've asked all the oldtimers that were building boats then around this area and they don't reconize it. I ran the numbers through the dmv and their off the record. I even went to Long Beach plywood who at that time was the largest supplier of mahogony plywood and they don't remember either. I'd give anyting I own to have that boat again, even if it was just for the frames to use as patterns, but I think it was long ago use as landfill or a bonfire.
My dad named the boat 'Thum-Purr'. It ran pretty good for what it was. That 75 evinrude ran on a mag, no charging system. With dads good 2 blade prop and only 2 in the boat, it's run just at 51 on the stewert warner speedo... so you could probably knock off a few mphs. lol I don't want to know what it REALLY ran on GPS. I like my own memories of it.
I have a few more shots of it and if you'd like I'll post some. My moms house burnt down a few years ago and most all of that old stuff was lost. Luckily I had one or 2 of the photo albums at the time of the fire.
-
OR wrote "My dads cousin was a fireman and was a rigger for Len Schiada back in the day. I've heard that his shop was a big hang out for them too?"
Headed to work this AM but thought you Guys might enjoy these Pics I have a huge binder of snapshots given me by my friend Mike Schiada (nephew of Len) Tom
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2F69%2520Schiada%2FMVC-047S.jpg&hash=c13aa423e1513c6d7e7c7b1859fa317a38335d1d)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2F69%2520Schiada%2FMVC-057S.jpg&hash=2d53b89189ebbfc88e9e9b82420a41a1f9bc27cd)
-
the pickup is in Monterey Heights, my friend Mike is doing a total resto of it circa 1946, he's friends with a bunch of Larry's old clubmates "The Trompers, Eagle Rock" he has breakfast with them quite often and he's actually the one that found the history of the truck while talking to some of the graybeards one day and telling them of my RPU purchase, I sold it to him with the condition that he A: restore it to it's former glory, and B: give the remaining Trompers complete liberty in it's rebuild he agreed and it's on the road to recovery, here's a pic of Shinoda in the RPU, circa 1946, not more than a year after he was released from an internment camp.
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi15.photobucket.com%2Falbums%2Fa353%2Fplan92%2F29_rpu%2Fshinoda_rpu_001.jpg&hash=468210b82d9f205a621dd453f65c2d91066e20eb)
here's a pic of Shinoda and someone else El Mirage dry lake, circa '48
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi8.photobucket.com%2Falbums%2Fa36%2Fluckiestiff%2FRandom%2520Shit%2Fshinoda1.jpg%3Ft%3D1191688698&hash=9aa9c65d2c67aa8d2c20c1155fd094040be384ac)
-
Maybe Brad could split this part of this thread which is happily "off topic" ;)
OR wrote "My dads cousin was a fireman and was a rigger for Len Schiada back in the day. I've heard that his shop was a big hang out for them too?"
Headed to work this AM but thought you Guys might enjoy these Pics I have a huge binder of snapshots given me by my friend Mike Schiada (nephew of Len) Tom
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2F69%2520Schiada%2FMVC-047S.jpg&hash=c13aa423e1513c6d7e7c7b1859fa317a38335d1d)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2F69%2520Schiada%2FMVC-057S.jpg&hash=2d53b89189ebbfc88e9e9b82420a41a1f9bc27cd)
-
Also "off topic" Lucky if you get out there today and any of the Team needs anything call me i'll be in after noon and Ro and i'll be over early tommorow AM Tom
-
2sav, how long have you lived in Bullhead?
We haven't been there for many years, drove through it about 7 years ago to show my wife and kids around and I couldn't believe how it has changed.
My grand parents moved there in 1960 and built the first home in the Riveria, which was kinda swanky back then but I don't even know what the hell it is now. We started to go the river in '61 and my folks and aunt and uncle rented a little place in one of the trailer parks for a few years and then bellied up I think in '63 and bought a trailer. We were the 3rd trailer from the water in Wagonwheel trailer park, which was still there when we drove through, until '72 when my folks bought in Parker. Our little trailer didn't even have a bathroom in it.lol But the park had shower and a bathroom.
It was a lot of fun back then, no Laughlin, no power plant, no signials in Bullhead nothing but endless flat, cold, water to ski on. It was perfect for out little flat bottom.
Just curious about where you live and how it is today? I haven't spent any real time there since my grand parents both died in 1980.
My folks and I, 1961 on the Laughlin side of the river with Bullhead in the background.
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv210%2Fflyin-t%2Fthumper1.jpg&hash=85d240974fdecc1913fbec1ea1310546d5a6ceb9)
Twenty years :o
I came up from Parker and before that was Cali.
Im sure this town has change alot since you were here last, They all seem to do that. Wagon wheel, man i used to get chit faced their on that old rickety dock, i aint been there in years, and im not missing out on anything.
Im lucky though i live right between two launch ramps so now i just need to finish these boats so i can use the ramps again ;D
Nice pic of the family and of course the boat, (go's without saying) ;D
If you are ever up this way again, lets hook up. I would love to talk to ya about BOATS ;D and get your perspective of thing.
2sav
-
The thread is going off topic? NO DON'T MOVE IT, it's finally a great thread! ;D
I know nothing and have heard nothing about that little hot rod pickup, but sh!t that is so flockin' cool, very similar look to the look I want out of my '32 (yea I know that one isn't a '32). Check out those old pics, damn this is a cool thread (NOW). ;D
Can you see the similarities?
[attachimg=#]
Same model A bed, stock Ford front axle, '32 grill, similar rake (when I get the correct rear wheels on it), same front frame horns, probably the same front wheels ('49 Ford, I think), the original one looks like a '28 or '29 though... check out the exhaust
Check out the intracey's (sp?) of that wood hull's construction - craftsmen!
Oh sh!t, I think I just threw the thread further off topic. :( :D
-
luckie,
the top picture is one of the one's that set me off to build one like it. I think it was in one of the Montgomery books, or a Tex Smith book. Great car, still would love to see it in person some day.
2sav,
too bad to hear about the wagonwheel. I was there when the dock was new. I have some pictures of it with the boat tied to it. Bill and Ruth Houseburg were the wagonwheel owners, the were in the park my folks were at before and then bought that property and developed it. Where in Parker were you. We had property at Marina View estates, '71 to '96 or so, right across the line where you could own porperty, 'bout a mile up river from Badenochs and on the water too. I bought the lot across the street fom my folks.
Cool shots of Schiada. We took one of the glass ones, the bottom boat, in on trade at Advantage...buts that's another story. If you talk to Lens nephew ask him if he remembers Floyd Chambers. That was my dads cousin. He died in '84.
-
luckie,
the top picture is one of the one's that set me off to build one like it. I think it was in one of the Montgomery books, or a Tex Smith book. Great car, still would love to see it in person some day.
2sav,
too bad to hear about the wagonwheel. I was there when the dock was new. I have some pictures of it with the boat tied to it. Bill and Ruth Houseburg were the wagonwheel owners, the were in the park my folks were at before and then bought that property and developed it. Where in Parker were you. We had property at Marina View estates, '71 to '96 or so, right across the line where you could own porperty, 'bout a mile up river from Badenochs and on the water too. I bought the lot across the street fom my folks.
Cool shots of Schiada. We took one of the glass ones, the bottom boat, in on trade at Advantage...buts that's another story. If you talk to Lens nephew ask him if he remembers Floyd Chambers. That was my dads cousin. He died in '84.
At first i lived in Big river and went to Parker High till my mom and dad kicked me out ;D then i moved.
Do you remember Porky's pizza place? i lived at the top of the hill above it. I think they called it Lakeside or something. I Remember Blue water lagoon just as you cross the bridge coming into parker left hand side and then we had the Blue water Marina where they race the boats now. If i remember correctly. We used to party down there where it was all beach and a two lane road, i dont know what its like now that they have the casino there.
I dont go back to parker to often, too many x girlfriends
And they all got Fat!
2sav