SoCal Jet Boats

Discussion => The No Wake Zone => WarZone => Topic started by: skee on April 18, 2010, 06:52:19 PM

Title: Thanx Skip! :-)
Post by: skee on April 18, 2010, 06:52:19 PM

Here it is Skip! Turned out Ok... ;D Thanx again for the scoop!  :thumbup:  8)

Title: Re: Thanx Skip! :-)
Post by: Luckie Stiff on April 18, 2010, 07:00:34 PM

Looks good, you should add a spacer between the carb and intake, it'll help your top end and pop that scoop all the way out of the hood!

Title: Re: Thanx Skip! :-)
Post by: skee on April 18, 2010, 07:08:35 PM

Quote from: Luckie Stiff on April 18, 2010, 07:00:34 PM

Looks good, you should add a spacer between the carb and intake, it'll help your top end and pop that scoop all the way out of the hood!

you talkin' about a 1/2 inch or 1 inch mteal spacer? Where do I get one? Eventually i want to upholster the eng. cover to match the interior...I also wanna get rid of the stock cast iron intake,but not sure which intake to use with stock 460....actually I need to get a carb and an intake,but the $$ is tight right now...any suggestions on what to use? (intake/carb set up)

Title: Re: Thanx Skip! :-)
Post by: Luckie Stiff on April 18, 2010, 07:11:40 PM

I'm sure the Ford guys will say otherwise, but as for an intake, Offenhauser Port O Sonic is a good unit, a nicely built 750-850 will be a great addition to your setup. Check your PM's