SoCal Jet Boats
Classifieds => WTB => Topic started by: folsom619 on August 17, 2015, 09:00:51 PM
-
Looking for a gullwing less motor...
Sent from my iPhone using SoCal Jet Boats
-
How much you looking to spend?
Sent from my iPhone using SoCal Jet Boats
-
How much you looking to spend?
Sent from my iPhone using SoCal Jet Boats
-
Looking for a nice river boat. I don't have a set price. Do you have something your ready to sell?
Sent from my iPhone using SoCal Jet Boats
-
I know someone with a sweet one for 18k less motor
Sent from my iPhone using SoCal Jet Boats
-
Yes I do, 1977 Youngblood tx19 light layup fully restored set up for bbc, solid pump with aq shaft stainless b- detailed impellor hcm inducer detailed bowl with stuffer by mpd ,brand new hyd diverter , prime a jet. The boat is almost flawless and the trailer is just as badass. I'm located in Santee if you wanna check it out. (619) 647-8095
Sent from my iPhone using SoCal Jet Boats
-
I know someone with a sweet one for 18k less motor
Sent from my iPhone using SoCal Jet Boats
I'd like to see a picture of this, I'm fully determined to have one by next year, just curious on how the price ranges match up. I know a guy that has a 19ft but it wasn't close to 18k. I talked to bill scotten over the weekend about the 3 new hulls he had on display at aha, they weren't rigged and no trailer but the white, blue and orange definitely caught my eye.
Sent from my iPhone using SoCal Jet Boats
-
Is this the Youngblood with Bostick racing on it
Sent from my iPhone using SoCal Jet Boats
-
What kinda price
Sent from my iPhone using SoCal Jet Boats
-
Pics?
Sent from my iPhone using SoCal Jet Boats
-
I'd like to see a picture of this, I'm fully determined to have one by next year, just curious on how the price ranges match up. I know a guy that has a 19ft but it wasn't close to 18k. I talked to bill scotten over the weekend about the 3 new hulls he had on display at aha, they weren't rigged and no trailer but the white, blue and orange definitely caught my eye.
Sent from my iPhone using SoCal Jet Boats
Run from bill! Guy is a pile and will burn you! call Greg shoemaker, he is building gulwings from The old rouse mold.
Sent from McIntyre park
-
Run from bill! Guy is a pile and will burn you! call Greg shoemaker, he is building gulwings from The old rouse mold.
Sent from McIntyre park
That's what I have heard, I will definitely go with Greg and Mike if I end up going the new hull route which I'm leaning towards. I just liked seeing some brand new boat hulls. I'm waiting to see if my buddy ends up selling his 19ft first, it was nice to see you out there this weekend jake!
Sent from my iPhone using SoCal Jet Boats
-
I know of one that might be for sale... Setup for a Ford... Pretty damn light 19'... It goes by the name of, "The Unicorn".
Sent from my iPhone using SoCal Jet Boats
-
How nice. I just happen to have a bad A$$ ford being built. Pics, price? What's happening six oh nine.
Sent from my iPhone using SoCal Jet Boats
-
I'll take pics when I get to the guys house this cp is the nicest one I've seen and it comes with a badass setback pump u can eat off the boat and the trailer
Sent from my iPhone using SoCal Jet Boats
-
Here is mine
Sent from my iPhone using SoCal Jet Boats
-
Here is mine
Sent from my iPhone using SoCal Jet Boats
thing makes my pecker twitch..
Sent from my iPhone using SoCal Jet Boats
-
Here is mine
Sent from my iPhone using SoCal Jet Boats
better put a ford in it!
-
better put a ford in it!
i will never take steps backwards in life
Sent from my iPhone using SoCal Jet Boats
-
😎
Sent from my iPhone using SoCal Jet Boats
-
i will never take steps backwards in life
Sent from my iPhone using SoCal Jet Boats
I just figured since you got beat by one at the cp regatta you might change your mind. Lol
-
I just figured since you got beat by one at the cp regatta you might change your mind. Lol
😂😂 can't wait to see the rogers with the 509.
"RTCP"
-
I just figured since you got beat by one at the cp regatta you might change your mind. Lol
stop it right now
Sent from my iPhone using SoCal Jet Boats
-
I just figured since you got beat by one at the cp regatta you might change your mind. Lol
ouch lol
Sent from my iPhone using SoCal Jet Boats
-
stop it right now
Sent from my iPhone using SoCal Jet Boats
I'm still trying to figure out how I can drive and use this in our rematch...
-
And your asking???
Sent from my iPhone using SoCal Jet Boats
-
Pm sent
Sent from my iPhone using SoCal Jet Boats
-
Here is mine
Sent from my iPhone using SoCal Jet Boats
👌🏻that's nice
Sent from my iPhone using SoCal Jet Boats
-
I'll take pics when I get to the guys house this cp is the nicest one I've seen and it comes with a badass setback pump u can eat off the boat and the trailer
Sent from my iPhone using SoCal Jet Boats
sounds good!!
Sent from my iPhone using SoCal Jet Boats
-
How nice. I just happen to have a bad A$$ ford being built. Pics, price? What's happening six oh nine.
Sent from my iPhone using SoCal Jet Boats
Pics? The thing is covered up 3 feet behind yours at this moment. Talk to Marcsrollin... it's his ride... he should be here at work tomorrow or message him.
-
I'll take pics when I get to the guys house this cp is the nicest one I've seen and it comes with a badass setback pump u can eat off the boat and the trailer
Sent from my iPhone using SoCal Jet Boats
is it this one? http://inlandempire.craigslist.org/boa/5167216457.html
Sent from my iPhone using SoCal Jet Boats
-
Holy cow $18500 no engine is that what these hulls actually go for?
-
Holy cow $18500 no engine is that what these hulls actually go for?
cost money to go fast. That one is on the high side but yep 11k less motor for a decently built one is common
"RTCP"
-
Not that mine is forsale but somewhere around 20 would be what I would want for mine complete.
"RTCP"
-
Holy cow $18500 no engine is that what these hulls actually go for?
that gel coat adds some $$$ too I'm guessing.
-
Not that mine is forsale but somewhere around 20 would be what I would want for mine complete.
"RTCP"
Becky for 20k. Someone needs to buy that $hit.
-
Ok just curious there where two in Tucson last season one 18' with 496 and a 19' 454 both original gel and interior for half the price. I should of bought them both pick the best hull pulled the other motor sold it and ended up with a free cp with a spare motor. If I knew then what I know now lol
-
Ok just curious there where two in Tucson last season one 18' with 496 and a 19' 454 both original gel and interior for half the price. I should of bought them both pick the best hull pulled the other motor sold it and ended up with a free cp with a spare motor. If I knew then what I know now lol
But... But... Were they REAL CP's??? Because everything else is a fake... Psudo-CP... Even the Earl Smith and Youngbloods which were before CP... Those are fakes too! :screwy: :screwy: :screwy: :o :o :o :o :o ::) ::) ::)
The fact of the matter is... They are worth as much as the intersection between what somone is trying to get for it and what someone is willing to pay for it... Anywhere other than that point is a boat not sold and not bought. If someone offers to pay full boat (oh how I love easy puns) then it's worth every nickel... If someone offers less and the seller accepts... Same deal.
Sent from my iPhone using SoCal Jet Boats
-
I rather buy one engine less, just so I can set it up the way I want but these hold their value when kept in good condition, yes some are a little high but hey when I list nice things for sale on Craigslist, I always ask more then I'm willing to let it go for just because of all the low ballers on there. These bad boys are pricey too http://www.boattrader.com/listing/2011-CALIFORNIA-PERFORMANCE-19-102575003
http://www.boattrader.com/listing/2002-CALIFORNIA-PERFORMANCE-19-102565271
Sent from my iPhone using SoCal Jet Boats
-
Pm sent
Sent from my iPhone using SoCal Jet Boats
damn I could only dream of owning that boat
Sent from my iPhone using SoCal Jet Boats
-
I rather buy one engine less, just so I can set it up the way I want but these hold their value when kept in good condition, yes some are a little high but hey when I list nice things for sale on Craigslist, I always ask more then I'm willing to let it go for just because of all the low ballers on there. These bad boys are pricey too http://www.boattrader.com/listing/2011-CALIFORNIA-PERFORMANCE-19-102575003
http://www.boattrader.com/listing/2002-CALIFORNIA-PERFORMANCE-19-102565271
Sent from my iPhone using SoCal Jet Boats
That guy ruined that thing putting those nav lights and cleats on it
Sent from my iPad using SoCalJetBoats
-
is it this one? http://inlandempire.craigslist.org/boa/5167216457.html
Sent from my iPhone using SoCal Jet Boats
yes that's it
Sent from my iPhone using SoCal Jet Boats
-
Its original gel coat dam thing is nice he has a 19 ' behind his shop too but customer lost interest but won't sell it I asked and that gel coat is clean too but it's blue
Sent from my iPhone using SoCal Jet Boats
-
Its original gel coat dam thing is nice he has a 19 ' behind his shop too but customer lost interest but won't sell it I asked and that gel coat is clean too but it's blue
Sent from my iPhone using SoCal Jet Boats
it's super nice I'm diggin the red white & blue I have my eyes set on a particular 19' but I have to wait and see if the guy actually buys his buddies Daytona if things fall through then I'll definitely be in contact it won't be anytime soon.
Sent from my iPhone using SoCal Jet Boats
-
Ok just curious there where two in Tucson last season one 18' with 496 and a 19' 454 both original gel and interior for half the price. I should of bought them both pick the best hull pulled the other motor sold it and ended up with a free cp with a spare motor. If I knew then what I know now lol
that one in Tucson was junk. Talked to the guy who bought it. Hurt motor and pump wasn't any good. Got to be careful on the good deals out there cuz you might end up spending more fixing
-
that one in Tucson was junk. Talked to the guy who bought it. Hurt motor and pump wasn't any good. Got to be careful on the good deals out there cuz you might end up spending more fixing
. The 18 was trash crack block stock pump the was damaged and the boat was trash. It was a 3500.00 project at best. You get what you pay for
Sent from my iPhone using SoCal Jet Boats
-
I know some of you guys see 20k and say we are crazy but I'm sorry guys what do you think it cost to build a solid 1000 hp motor, a pump that can handle it, and the correct hardware to somewhat safely go 100+ in one of these boats. If someone can find a true 100+ mph Gullwing for around 10k sign me up for 2. And still could have saved almost 10k building mine.
"RTCP"
-
I know some of you guys see 20k and say we are crazy but I'm sorry guys what do you think it cost to build a solid 1000 hp motor, a pump that can handle it, and the correct hardware to somewhat safely go 100+ in one of these boats. If someone can find a true 100+ mph Gullwing for around 10k sign me up for 2. And still could have saved almost 10k building mine.
"RTCP"
I agree, people think they can just scrape by and buy cheap and go fast but when u get down to the basics of building a legit boat the right way with all the right equipment to pull off 100 mph with a proper pump your looking at 30+ grand. It takes time and lots of cash to haul ass.
-
I agree, people think they can just scrape by and buy cheap and go fast but when u get down to the basics of building a legit boat the right way with all the right equipment to pull off 100 mph with a proper pump your looking at 30+ grand. It takes time and lots of cash to haul ass.
Yes sir!! 👍👍
"RTCP"
-
30,000.00 is what I have in this boat. New from the top to bottom. Bostick power, B1 pump and Sammy paint job. That cost has nothing to do with the thousand hours I got in this deal either. I have not left one old bolt on the boat every piece is new. If you able to find a true Youngblood TX fully restored with the best of everything that will run 116 mph for under 30 grand you have done well. CHEAP IS NOT GOOD AND GOOD IS NOT CHEAP.
Sent from my iPhone using SoCal Jet Boats
-
Ok not sure where you guys are taking this I'm trying to understand the value of these hulls $18500 for a bare hull is a big pill to swallow the 18' Cp in Tucson brown in color had Larry's engine and marine on the side was on CL for at least 2 season if it is the same one that would explain why. Good luck with your hunt folsom619
-
Ok not sure where you guys are taking this I'm trying to understand the value of these hulls $18500 for a bare hull is a big pill to swallow the 18' Cp in Tucson brown in color had Larry's engine and marine on the side was on CL for at least 2 season if it is the same one that would explain why. Good luck with your hunt folsom619
1. The guy knew not one thing about it. 2. It was not in so cal 6 hr drive for most of us. 3. The motor was nothing special. 4. The Interrior was trash. 5. There is cracks everywhere 6. It's light. 7. He was also asking 14,000 when he first listed it. 8. I'm sorry not trying to be an ass but that boat honestly doesn't compare to Jimpens or mine. We know this only because the guy who bought it stays at riviera.
"RTCP"
-
Ok not sure where you guys are taking this I'm trying to understand the value of these hulls $18500 for a bare hull is a big pill to swallow the 18' Cp in Tucson brown in color had Larry's engine and marine on the side was on CL for at least 2 season if it is the same one that would explain why. Good luck with your hunt folsom619
New bare hulls "no holes cut" from bill start at 9k without trailer. So after trailer your in it 12k, a solid 750-800hp motor 15k, seats and Interrior $2500, guages 1k, tanks 800, steering 300, having Chris set intake and build you a rail kit 4k, pump to handle 1000hp 5k, fuel system 1k, plumbing 1500, paying someone to wire atleast 1k, shitting yourself the first time you drive it = priceless, what I'm trying to say there is a HUGE difference between your average river boat and building a true performance boat.
"RTCP"
-
Ok not sure where you guys are taking this I'm trying to understand the value of these hulls $18500 for a bare hull is a big pill to swallow the 18' Cp in Tucson brown in color had Larry's engine and marine on the side was on CL for at least 2 season if it is the same one that would explain why. Good luck with your hunt folsom619
. Here you go I will break it down
1. Pump for 1200 hp complete. 5500.00
2. New gauges gps speedo. 800.00
3. Hull with new paint. 7500.00
4. Fiberglass bucket and bench. 1400.00
5. New interior in tweed. 1200.00
6. MSD box retard box. 600.00
7. All new cables 400.00
8. B&J diverted pump. 650.00
9. Rail kit. 450.00
10. Misc hardware, transom fitting, bilge pump, custom brackets,tanks and fuel system. 2500.00
That's 22,000.00. Now drop a motor in and plumb it and wire the boat.
Sent from my iPhone using SoCal Jet Boats
-
Cheap Fast Reliable. Pick two
Sent from my iPhone using SoCalJetBoats
-
. Here you go I will break it down
1. Pump for 1200 hp complete. 5500.00
2. New gauges gps speedo. 800.00
3. Hull with new paint. 7500.00
4. Fiberglass bucket and bench. 1400.00
5. New interior in tweed. 1200.00
6. MSD box retard box. 600.00
7. All new cables 400.00
8. B&J diverted pump. 650.00
9. Rail kit. 450.00
10. Misc hardware, transom fitting, bilge pump, custom brackets,tanks and fuel system. 2500.00
That's 22,000.00. Now drop a motor in and plumb it and wire the boat.
Sent from my iPhone using SoCal Jet Boats
Understood thx Jim
-
This thread may serve as a dose of reality for some that are building or buying a boat. 😳
When they say speed kills, it's actually referring to your finances.
Steve-O
-
This thread may serve as a dose of reality for some that are building or buying a boat. 😳
When they say speed kills, it's actually referring to your finances.
Steve-O
😂😂 yes sir!
"RTCP"
-
Well I still plan to have one by next year LOL🍻 just might only need one seat after the wife catches on haha
Sent from my iPhone using SoCal Jet Boats
-
Well I still plan to have one by next year LOL🍻 just might only need one seat after the wife catches on haha
Sent from my iPhone using SoCal Jet Boats
Lol hints why I havnt popped the question to Chausa yet. Build the boat first!! Lol
"RTCP"
-
Lol hints why I havnt popped the question to Chausa yet. Build the boat first!! Lol
"RTCP"
wise words lol
Sent from my iPhone using SoCal Jet Boats
-
Lol hints why I havnt popped the question to Chausa yet. Build the boat first!! Lol
"RTCP"
Better barry this thread because you just exposed your wallet lol
-
Better barry this thread because you just exposed your wallet lol
EMPTY!!! 😂😂😂
"RTCP"
-
I'm in the same mix right now, full restoration/build.
My wife got to the point where she doesn't even ask about costs anymore-just for her own well being. One of the happiest moments of my life 😁.
Steve-O
-
True 😭
-
I'm in the same mix right now, full restoration/build.
My wife got to the point where she doesn't even ask about costs anymore-just for her own well being. One of the happiest moments of my life 😁.
Steve-O
Thats perfect, my girlfriend I have been with for 5+ years is the same way. Just make sure bills are paid and keep her happy.
"RTCP"
-
Yup, I will have one by next year as well. I know what I'm looking for and next summer is just a little ways away....
Sent from my iPhone using SoCal Jet Boats
-
EMPTY!!! 😂😂😂
"RTCP"
Lmao!!!! But none of it matters when you're on the water with the throttle to the wood... Actually doesn't matter even if you're not to the wood... Your boat came out amazing dude!
Sent with my Fingers
-
Lmao!!!! But none of it matters when you're on the water with the throttle to the wood... Actually doesn't matter even if you're not to the wood... Your boat came out amazing dude!
Sent with my Fingers
ha completely true! And thank you for the fine compliments
"RTCP"
-
Set a intake and build a rail kit is 4k?!?!? I am totally in the wrong end of this business!
And if the going rate to wire a boat is 1k... I way undercharged Lupo... By less than half.
Thanks for the info!
Sent from my iPhone using SoCal Jet Boats
-
Set a intake and build a rail kit is 4k?!?!? I am totally in the wrong end of this business!
And if the going rate to wire a boat is 1k... I way undercharged Lupo... By less than half.
Thanks for the info!
Sent from my iPhone using SoCal Jet Boats
well glad we got that deal sealed up before this thread was started
Sent from my iPhone using SoCal Jet Boats
-
Set a intake and build a rail kit is 4k?!?!? I am totally in the wrong end of this business!
And if the going rate to wire a boat is 1k... I way undercharged Lupo... By less than half.
Thanks for the info!
Sent from my iPhone using SoCal Jet Boats
. He is making the big dollars now just make up for it on this new build. I think the wiring you did is worth a grand charge him.
Sent from my iPhone using SoCal Jet Boats
-
The motor in this cp cost 60k to build its a all aluminum 572 with God knows how many man hours to make this boat do 130+
Sent from my iPhone using SoCal Jet Boats
-
. He is making the big dollars now just make up for it on this new build. I think the wiring you did is worth a grand change him.
May your arms be tied behind your back and 1000 fleas invest your nuts
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
-
Sent from my iPhone using SoCal Jet Boats
. All right now you went to far sir. I prefer my nuts just the way they are.
Sent from my iPhone using SoCal Jet Boats
-
. All right now you went to far sir. I prefer my nuts just the way they are.
Sent from my iPhone using SoCal Jet Boats
i really wouldn't wish that on any one
Sent from my iPhone using SoCal Jet Boats
-
I take that back, rapist, terrorist , and child melosters and maybe a few others I can remember.
Sent from my iPhone using SoCal Jet Boats
-
Set a intake and build a rail kit is 4k?!?!? I am totally in the wrong end of this business!
And if the going rate to wire a boat is 1k... I way undercharged Lupo... By less than half.
Thanks for the info!
Sent from my iPhone using SoCal Jet Boats
should have been more descriptive, buy intake/ loader/ shoe/ ride plate, have hole cut and set, build transom plates, motor plate and rails. And by all means the wiring you did for lupo is ( • )( • )'s a would have paid 1k for that
"RTCP"
-
i really wouldn't wish that on any one
Sent from my iPhone using SoCal Jet Boats
. Thanks Lupo I'm sure that would have been a bad day
Sent from my iPhone using SoCal Jet Boats
-
should have been more descriptive, buy intake/ loader/ shoe/ ride plate, have hole cut and set, build transom plates, motor plate and rails. And by all means the wiring you did for lupo is ( • )( • )'s a would have paid 1k for that
"RTCP"
A LOT more work in there for the loot... I was like if these guys spend 4k on just set an intake and build a rail kit... Daaayum... I'm now in the rail kit and intake setting business as of now!
Sent from my iPhone using SoCal Jet Boats
-
Lupo... As per Jim's suggestion... Not my idea... Totally Jim's fault... He is the guy that suggested this great idea... And deserves ALL the credit... Gonna have to raise my rates... But just for you... Consider it like the progressive tax schedule... And your ass landed in a much higher bracket! It's cool though... Means you're doing well in life and can share the wealth with the less fortunate.
Sent from my iPhone using SoCal Jet Boats
-
Lupo... As per Jim's suggestion... Not my idea... Totally Jim's fault... He is the guy that suggested this great idea... And deserves ALL the credit... Gonna have to raise my rates... But just for you... Consider it like the progressive tax schedule... And your ass landed in a much higher bracket! It's cool though... Means you're doing well in life and can share the wealth with the less fortunate.
Sent from my iPhone using SoCal Jet Boats
. Just glade I could help out guys. Not sure Lupo but it sound like some kind of Obama tax......your screwed. I could use that tunnel ram and carbs, just trying to help your cash flow out.
Sent from my iPhone using SoCal Jet Boats
-
Thats perfect, my girlfriend I have been with for 5+ years is the same way. Just make sure bills are paid and keep her happy.
"RTCP"
As long as we are on the water I'm a happy girl! (With this jet boat, I thee wed) 😂
"🍑River Peaches🍑"
-
As long as we are on the water I'm a happy girl! (With this jet boat, I thee wed) 😂
"🍑River Peaches🍑"
Hahah that's great!
When the time comes, looks like you guys will get married on the river