19' California performance gullwing

« **Reply #50 on:** August 19, 2015, 07:32:58 AM »

Ok not sure where you guys are taking this I'm trying to understand the value of these hulls $18500 for a bare hull is a big pill to swallow the 18' Cp in Tucson brown in color had Larry's engine and marine on the side was on CL for at least 2 season if it is the same one that would explain why. Good luck with your hunt folsom619

« **Reply #51 on:** August 19, 2015, 07:40:34 AM »

Quote from: RiverRat474 on August 19, 2015, 07:32:58 AM

Ok not sure where you guys are taking this I'm trying to understand the value of these hulls $18500 for a bare hull is a big pill to swallow the 18' Cp in Tucson brown in color had Larry's engine and marine on the side was on CL for at least 2 season if it is the same one that would explain why. Good luck with your hunt folsom619

1. The guy knew not one thing about it. 2. It was not in so cal 6 hr drive for most of us. 3. The motor was nothing special. 4. The Interrior was trash. 5. There is cracks everywhere 6. It's light. 7. He was also asking 14,000 when he first listed it. 8. I'm sorry not trying to be an ass but that boat honestly doesn't compare to Jimpens or mine. We know this only because the guy who bought it stays at riviera.

"RTCP"

« **Reply #52 on:** August 19, 2015, 07:52:39 AM »

Quote from: RiverRat474 on August 19, 2015, 07:32:58 AM

Ok not sure where you guys are taking this I'm trying to understand the value of these hulls $18500 for a bare hull is a big pill to swallow the 18' Cp in Tucson brown in color had Larry's engine and marine on the side was on CL for at least 2 season if it is the same one that would explain why. Good luck with your hunt folsom619

New bare hulls "no holes cut" from bill start at 9k without trailer. So after trailer your in it 12k, a solid 750-800hp motor 15k, seats and Interrior $2500, guages 1k, tanks 800, steering 300, having Chris set intake and build you a rail kit 4k, pump to handle 1000hp 5k, fuel system 1k, plumbing 1500, paying someone to wire atleast 1k, shitting yourself the first time you drive it = priceless, what I'm trying to say there is a HUGE difference between your average river boat and building a true performance boat.

"RTCP"

« **Reply #53 on:** August 19, 2015, 07:54:07 AM »

Quote from: RiverRat474 on August 19, 2015, 07:32:58 AM

Ok not sure where you guys are taking this I'm trying to understand the value of these hulls $18500 for a bare hull is a big pill to swallow the 18' Cp in Tucson brown in color had Larry's engine and marine on the side was on CL for at least 2 season if it is the same one that would explain why. Good luck with your hunt folsom619

. Here you go I will break it down

1. Pump for 1200 hp complete. 5500.00
2. New gauges gps speedo. 800.00
3. Hull with new paint. 7500.00
4. Fiberglass bucket and bench. 1400.00
5. New interior in tweed. 1200.00
6. MSD box retard box. 600.00
7. All new cables 400.00
8. B&J diverted pump. 650.00
9. Rail kit. 450.00
10. Misc hardware, transom fitting, bilge pump, custom brackets,tanks and fuel system. 2500.00

That's 22,000.00. Now drop a motor in and plumb it and wire the boat.

Sent from my iPhone using SoCal Jet Boats

« **Reply #54 on:** August 19, 2015, 08:08:26 AM »

Cheap Fast Reliable. Pick two

Sent from my iPhone using SoCalJetBoats

« **Reply #55 on:** August 19, 2015, 08:16:49 AM »

Quote from: jimpen on August 19, 2015, 07:54:07 AM

. Here you go I will break it down

1. Pump for 1200 hp complete. 5500.00
2. New gauges gps speedo. 800.00
3. Hull with new paint. 7500.00
4. Fiberglass bucket and bench. 1400.00
5. New interior in tweed. 1200.00
6. MSD box retard box. 600.00
7. All new cables 400.00
8. B&J diverted pump. 650.00
9. Rail kit. 450.00
10. Misc hardware, transom fitting, bilge pump, custom brackets,tanks and fuel system. 2500.00

That's 22,000.00. Now drop a motor in and plumb it and wire the boat.

Sent from my iPhone using SoCal Jet Boats

Understood thx Jim

« **Reply #56 on:** August 19, 2015, 08:51:13 AM »

This thread may serve as a dose of reality for some that are building or buying a boat. 😳
When they say speed kills, it's actually referring to your finances.

Steve-O

« **Reply #57 on:** August 19, 2015, 08:57:14 AM »

Quote from: Steve-O on August 19, 2015, 08:51:13 AM

This thread may serve as a dose of reality for some that are building or buying a boat. 😳
When they say speed kills, it's actually referring to your finances.

Steve-O

😂😂 yes sir!

"RTCP"

« **Reply #58 on:** August 19, 2015, 09:00:00 AM »

Well I still plan to have one by next year LOL🍻 just might only need one seat after the wife catches on haha

Sent from my iPhone using SoCal Jet Boats

« **Reply #59 on:** August 19, 2015, 09:17:09 AM »

Quote from: WhyNot76 on August 19, 2015, 09:00:00 AM

Well I still plan to have one by next year LOL🍻 just might only need one seat after the wife catches on haha

Sent from my iPhone using SoCal Jet Boats

Lol hints why I havnt popped the question to Chausa yet. Build the boat first!! Lol

"RTCP"

« **Reply #60 on:** August 19, 2015, 09:17:57 AM »

Quote from: capogniracing on August 19, 2015, 09:17:09 AM

Lol hints why I havnt popped the question to Chausa yet. Build the boat first!! Lol

"RTCP"

wise words lol

Sent from my iPhone using SoCal Jet Boats

« **Reply #61 on:** August 19, 2015, 09:21:28 AM »

Quote from: capogniracing on August 19, 2015, 09:17:09 AM

Lol hints why I havnt popped the question to Chausa yet. Build the boat first!! Lol

"RTCP"

Better barry this thread because you just exposed your wallet lol

« **Reply #62 on:** August 19, 2015, 09:24:54 AM »

Quote from: RiverRat474 on August 19, 2015, 09:21:28 AM

Better barry this thread because you just exposed your wallet lol

EMPTY!!! 😂😂😂

"RTCP"

« **Reply #63 on:** August 19, 2015, 09:26:22 AM »

I'm in the same mix right now, full restoration/build.

My wife got to the point where she doesn't even ask about costs anymore-just for her own well being. One of the happiest moments of my life 😁.

Steve-O

« **Reply #64 on:** August 19, 2015, 09:27:27 AM »

True 😭

« **Reply #65 on:** August 19, 2015, 09:32:03 AM »

Quote from: Steve-O on August 19, 2015, 09:26:22 AM

I'm in the same mix right now, full restoration/build.

My wife got to the point where she doesn't even ask about costs anymore-just for her own well being. One of the happiest moments of my life 😁.

Steve-O

Thats perfect, my girlfriend I have been with for 5+ years is the same way. Just make sure bills are paid and keep her happy.

"RTCP"

« **Reply #66 on:** August 19, 2015, 09:39:03 AM »

Yup, I will have one by next year as well. I know what I'm looking for and next summer is just a little ways away....

Sent from my iPhone using SoCal Jet Boats

« **Reply #67 on:** August 19, 2015, 12:43:00 PM »

Quote from: capogniracing on August 19, 2015, 09:24:54 AM

EMPTY!!! 😂😂😂

"RTCP"

Lmao!!!! But none of it matters when you're on the water with the throttle to the wood... Actually doesn't matter even if you're not to the wood... Your boat came out amazing dude!

Sent with my Fingers

« **Reply #68 on:** August 19, 2015, 12:53:01 PM »

Quote from: MorePower on August 19, 2015, 12:43:00 PM

Lmao!!!! But none of it matters when you're on the water with the throttle to the wood... Actually doesn't matter even if you're not to the wood... Your boat came out amazing dude!

Sent with my Fingers

ha completely true! And thank you for the fine compliments

"RTCP"

« **Reply #69 on:** August 19, 2015, 07:25:05 PM »

Set a intake and build a rail kit is 4k?!?!? I am totally in the wrong end of this business!

And if the going rate to wire a boat is 1k... I way undercharged Lupo... By less than half.

Thanks for the info!

Sent from my iPhone using SoCal Jet Boats

« **Reply #70 on:** August 19, 2015, 07:46:26 PM »

Quote from: Six-Oh-Nine on August 19, 2015, 07:25:05 PM

Set a intake and build a rail kit is 4k?!?!? I am totally in the wrong end of this business!

And if the going rate to wire a boat is 1k... I way undercharged Lupo... By less than half.

Thanks for the info!

Sent from my iPhone using SoCal Jet Boats

well glad we got that deal sealed up before this thread was started

Sent from my iPhone using SoCal Jet Boats

« **Reply #71 on:** August 19, 2015, 08:03:46 PM »

Quote from: Six-Oh-Nine on August 19, 2015, 07:25:05 PM

Set a intake and build a rail kit is 4k?!?!? I am totally in the wrong end of this business!

And if the going rate to wire a boat is 1k... I way undercharged Lupo... By less than half.

Thanks for the info!

Sent from my iPhone using SoCal Jet Boats

. He is making the big dollars now just make up for it on this new build. I think the wiring you did is worth a grand charge him.

Sent from my iPhone using SoCal Jet Boats

« **Reply #72 on:** August 19, 2015, 08:08:40 PM »

The motor in this cp cost 60k to build its a all aluminum 572 with God knows how many man hours to make this boat do 130+

Sent from my iPhone using SoCal Jet Boats

« **Reply #73 on:** August 19, 2015, 08:16:11 PM »

Quote from: jimpen on August 19, 2015, 08:03:46 PM

. He is making the big dollars now just make up for it on this new build. I think the wiring you did is worth a grand change him.
May your arms be tied behind your back and 1000 fleas invest your nuts

Sent from my iPhone using SoCal Jet Boats

Sent from my iPhone using SoCal Jet Boats

« **Reply #74 on:** August 19, 2015, 08:18:31 PM »

Quote from: lupo1904 on August 19, 2015, 08:16:11 PM

Sent from my iPhone using SoCal Jet Boats

. All right now you went to far sir. I prefer my nuts just the way they are.

Sent from my iPhone using SoCal Jet Boats

RiverRat474

capogniracing

capogniracing

jimpen

Bunger

RiverRat474

Steve-O

capogniracing

WhyNot76

capogniracing

WhyNot76

RiverRat474

capogniracing

Steve-O

RiverRat474

capogniracing

folsom619

MorePower

capogniracing

Six-Oh-Nine

lupo1904

jimpen

brian777

lupo1904

jimpen