SoCal Jet Boats
Classifieds => WTB => Topic started by: santeerob619 on July 06, 2013, 08:45:14 PM
-
I'm looking for some parts, new or used. Deep sump oil pan, parts for remote oil filter, aluminum heads, any performance parts. Also I need a droop, ride plate diverter for Berkeley split bowl and any cables, hardware, steering extension. Let me know what you've got, I've got the loot.
Sent from my DROID RAZR HD using SoCalJetBoats mobile app
-
I've got a BBC oil pan its a Canton marine pan its to deep for my boat. only run time was on the dyno. Its a heavy duty pan its thick
-
How deep is it? Does it come with a windage tray or pickup? I need to measure how much room I have next time I go, I dont have my boat in town.
Sent from my DROID RAZR HD using SoCalJetBoats mobile app
-
Ill measure it tomarrow motors at the shop but I'm pretty sure its an 8" pan it has the windage tray trap doors & pickup. Its a good looking pan just wont fit my boat.
-
Cool. How much are you looking to get for all that? I would have to measure this weekend, but I need it.
Sent from my DROID RAZR HD using SoCalJetBoats mobile app
-
The pan is 8" deep but with a gasket it is alittle deeper. I would like to get $350 for pan and pickup To get back some money the new oil pan I had to buy cost. The pan alone is $450 with out pickup new and mine is pretty new
-
OK. I just need to measure this weekend. If I have 8 inches I'll buy it. U said it has a windage tray right?
Sent from my DROID RAZR HD using SoCalJetBoats mobile app
-
It sure dose if you check out Canton oil pans web sit its part # is 18-302 under Chevy marine pans.
-
Cool. I'm going down this weekend so I will measure. Do u ever get down south towards San Diego or Martinez lake?
Sent from my DROID RAZR HD using SoCalJetBoats mobile app
-
San diego Not to much now since we had are baby. And never been to Martinez lake.
-
OK. I'll let u know this weekend if it will fit. And if u still have it, hopefully, I can come pick it up?
Sent from my DROID RAZR HD using SoCalJetBoats mobile app
-
Check your clearance at the four bolts on your intake that's where it was hitting in my boat By a 1/2" and it put the drive shaft in a little bind. I'd hate for you to have the same problem I did. 8" is a standard oil pan size for jet boats but I guess not for mine. If it will fit your boat I'd be willing to meet you half way.
-
OK. I'll check it out. I'm pretty sure it has the stock pan that came out of a corvette.
Sent from my DROID RAZR HD using SoCalJetBoats mobile app
-
I'm going to measure in the morning. It looks a little tight but its dark. I got my regulator on. I couldn't bring myself to slap it on half ass. I might have gone a little overboard?
Sent from my DROID RAZR HD using SoCalJetBoats mobile app